Renovation of IEI to Qtr. No.A-2, Type II at PS Aberdeen Complex, Port Blair

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with piano type switch, suitable size plastic switch board and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required

Group A

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, suitable size plastic switch board and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing the following way plastic switch board (ISI marked) on surface:

1 way ( Make: Press Fit, Code : 563051 or equivalent)

2 way ( Make: Press Fit, Code : 563051 or equivalent)

2 way, 16A ( Make: Press Fit, Code : 563121 or equivalent)

4 way ( Make: Press Fit, Code : 563101 or equivalent)

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

Supplying and fixing 100 W, Deluxe Fan Regulator Rotary Step (Socket Type) (Make: Anchor, Code : 14502 or equivalent) on the existing switch board including connections etc. as required.

Supplying of LED box type batten suitable for single TLED lamp ( Make:- Philips, Type: TMC 501 P 1xT- LED 22W P3241 or equivalent) with a 18 watt LED T8 tubelamp with PC body ( Make:- Philips, Model: MAS LED tube 18W 1800lm 865 T8 or equivalent) complete with all accessories etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying of Wall Light suitable for 1x B22 LED lamp (Make: Havells, Model : Sana or equivalent ).

Supplying and fixing the following LED lamp on the existing lamp holder:

9W, B22 LED lamp, CDL/WW ( Make : Havells or equivalent )

5W, B22 LED lamp, CDL/WW ( Make : Havells or equivalent )

Supplying and fixing Electronic Door Bell suitable for single phase, 230 V (Make: Philips, Model: Smart Harmony, Model No.: 913713825601 or equivalent ).

Supplying of 10W LED Bulkhead with PDC Al housing and IP65 Protection, CDL (Make: Crompton, Model : Sunrise or equivalent ).

Supplying of 1' , 5W Batten LED(Integrated), CDL ( Make: Philipsj, Model.: Astra Line or equivalent).

Installation ,Testing, Commissioning of all LED wall bracket /ceiling fittings of all sizes and shapes , complete with all accessories including connections etc. as required.

Supplying of energy saving BLDC A.C. Ceiling fan of 1200 mm sweep of approved colour suitable for operation on 230 volts, single phase, 50 Hz, AC supply with all accessories as required (Make: Orient, Model: Hector-500 or equivalent).

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying of exhaust fan of 230 mm sweep (Metallic ) (Make: Usha, Model : Aeroclean LD GBD or equivalent).

Supplying of exhaust fan of 150 mm sweep (Non Metallic ) (Make: Usha, Model : Crisp Air or equivalent).

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single Pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Earthing with G.I. earth pipe 2.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

M/s G K Construction

JAY ENGINEERING

M/s Sai Electrical Works

JOY GURU ENTERPRISES