SPECIAL REPAIR TO BUILDING NO P-12 OFFICER MARRIED ACCN OF NTS PROVN OF VEHICLE PARKING SHED IN GURUGRAM BAGH AT NTS AND PROVN OF INTERLOCKING PAVER CHEQUERED TILES AT CERTAIN LOCATION AT AFSSR UNDER GE AF GURGAON

Amount

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for including dismantling of floor tiles etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed .

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed.

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and as directed .

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm / 20mm dia bore complete all as specified and as directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and as directed.

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/hardstanding etc complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 (using 20 mm agg. ) as in plinth protection / path/ any paved area complete all as spd and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed.

M & L for Non Skid jointless,scratch proof& stain resistance ceramic printed coloured tiles 600x600x9-10mm thick as in skirting etc , set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

M&L for Glazed ceramic printed coloured tiles 300mmx 450mm , 6 to 7 mm thick, as on vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match,incl cutting edges etc complete all as specified and and as directed.

M&L for machine cut and mirror polished kota stone slab 18-20 in riser of steps(in one piece ) , skirting, dado and pillar aid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurryand pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete complete all as specifed and as directed.

M&L for Chequered cement concrete coloured tiles 30cm x30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade. complete all as specifed and as directed.

S&F 75mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade with rubber ring joints fixed to walls with dash true nut and bolt complete all as specified and as directed.

S & F 75mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

S & F 75mm dia PVC (SWR) tee with rubber rings joints fixed as required complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with oneincludings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed.

M&L for cement concrete type B-0 1:2:4 (12.5 mm granded stone aggregates) in door and windows frames any size single or double rebated, as required etc complete all as specified and as directed.

M&L for mild steel framed work as in grills, grating, doors, etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed baluusters wals ways, railing framed wor of water tans and similar work etc complete all as specified and as directed.

S&F factory made 30mm IInd class hard wood Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S& F 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) etc complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with Ms Squre Tube in opening etc complete all as specified and as directed.

S & F factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded both side prelam PVC sheet instead of plain colour PVC 'C' channelled having a PVC sheet strip of 20 mm wide stuck inside with solvent cement for siles and palin colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail : panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame a site as per specification and drawing etc complete all as specified and as directed.

Supply and fixing mild steel cup board 60cm depth & with sides,back& 3 shelves&partition,top bottom& mild steel door shutter Godrej pattern two leaves with frame,incl necessary fittings of 18gauge MS sheet with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings& two coats of spray painting over a coat of red oxide zinc chromate primer complete. The frame of cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured) complete all as specified and as directed.

Supply and fix 3ways sliding powder coated / anodized aluminium glazed window frame of size 88mm x 32mm x 2mm thick complete all as specified and as directed.

Supply and fix 3ways sliding powder coated / anodized aluminium glazed window shutter with the following specification :- (a) Window Shutter with 18mm x40mm x 1.5mm section in stiles, rails (b) Supply and fix of rubber beading and with 4.8mm thick coloured glass pane one side mirror finished , area with aluminium handles and necessary locking arrangement. (c) S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed. Note : Rates are included for glass, stainless steel wire cloth and all other necessary accessoires etc.

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as spd and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed ( in repair).

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed.

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed.

S&F 100 mm thick stainless steel butt hinges, heavy weight, cold rolled mild steel and fixed etc complete all as specified and as directed.

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and as directed.

S&F in repair mild steel helical door spring 150 mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and as directed.

S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs stainless steel plate rack (wall mounted) of size 600mm x 750mm x 250mm of stainless steel 0.63mm thick with four shelves complete all as specified and as directed.

S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.

S&F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm white with cast iron ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed.

S&F in repair tubular towel rail 20mm dia type brass chromium plated 600mm long between flanges complete all as specified and as directed.

S&F Center hole basin mixer w/o Popup waste cat no F330014CP (HINDWARE) OR Equivalant all as specified and as directed.

S&F wall mixer with provision for over head shower with115 mm long bend pipe cat no F330020(HINDWARE) OR Equivalant all as specified and as directed.

S&F wall mixer with 115 mm long bend pipe cat no F330019(HINDWARE) or equivalant all as specified and as directed.

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe & fixing of chain & pull or lever if including PVC pipe etc complete all as specified and as directed.

S&F in repair bib tap fancy type long body cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed.

S&F Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Dismantling of existing tank of capacity exc 250 ltr but not exc 500 ltr,water tanks and removing to store and S&F in repair rotational moulded polyethylene water storage tanks IS :12701-1996 marked (cylindrical vertical with close top) of 500 Ltr capacity with an including 20mm dia ball PVC float valves with polythene float and flynut screwed for iron pipe or brass and fixed etc complete all as specified and as directed.

S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

S&F in repair for 75 mm bore out let floor trap of cast iron with stainless steel gratings including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed.

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) concealled/surfaced complete all as specified and as directed.

S&F tubes medium grade galvanized with all fittings & fixed concealled/surfaced complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed.

S&F in repair for 75mm bore out let Nahani trap of Cast iron with stainless steel grating including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed.complete all as specified and as directed.

Taking down PVC/cast iron pipes any bore including fittings of any dia with cement or lead joint fixed to walls or laid in trenches complete for refixing or replacement complete all as specified and as directed.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls with clamps complete all as specified and as directed.

S & F in repair 110 mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

S & F 75mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls with clamps complete all as specified and as directed.

S & F in repair 75 mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) etc complete all as specified and as directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:3) with wpc on RCC Chajja / Facia over 20mm thick in CM 1:4 as dubbing coat etc complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparing old / new plastered surface and applying two coat of oil bound distemper on celling white or any tint over a coat of primer etc) complete as specified and as directed.

M&L for complete removal of existing treatment of wall surfaces by Washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and as directed.

M&L for preparing plastered surface with 2mm thick Birla/Asian wall care Putty & applying two coat of oil bound distemper on walls white or any tint over a coat of primer etc) complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces / old surface complete all as specified and as directed.

M&L for preparing new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. (Note : Colour & Pattern as approved by Engr-in-Charge)

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing debris to a distance exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed.

M & L for PCC 1:2:4 type C-2 (using 20 mm agg. ) as on roof flooring, copings necessary formowrk , weathering, rounded champhered etc complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused withblow lamp laid over a coat bitumen @ 1.20 Kg /Sqm over bituminous primer 0.30 ltr per sqm as per APP manufacturer instructions etc complete all as specified and as directed.

Supply and fixing Terrace Tiles 300 mm x 300 mm x 20 mm waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Rolling and consolidating formation surface with 8 to 12 tonne power roller to required gradient and camber etc complete all as specified and as directed.

M&L for 100mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roads etc complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roads etc complete all as specified and as directed.

M&L for 20 mm thick sand cushioning including watering and consolidations etc complete all as specified and as directed.

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 80 mm thick, M- 40 grade to match with grey cement and pigment etc complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance and all as directed.

Excavation in post holes (or similar holes) in Hard /Dense soil each n exe 0.5 cu.m, gettting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exeeding 25cm, watering, and removing surplus soil to a distance n exe 50 m and making good surface complete all as specified and as directed.

S&F pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for factory made pre-cast cement concrete block type B1, 1:2:4 as in kerb stone made to shape as directed, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and as directed.

M&L for preparation of new stone, concrete , cement surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a priming paints plaster coat of complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking into credit and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size( Nominal area) PVC insulated unsheathed FRLS Grade cable 1100 volts grade confirming to IS 694 for phase and neutrel drawn in and includin less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers including single core stranded copper conductor 1.5Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth doily drawn in same concealed conduit complete all as specified and as directed for the following;-

(a) One light point /bell point/Fan point controlled by one switch with cable 1.5 Sqmm size complete all as specified and as directed.

(C) One llight point controlled by two way 6 Amps switch complete all as specified and as directed.

(d) One 5 pin socket outlet 5/6 Amps on Same board including singal core stranded copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth doily complete all as specified and as directed.

(e) One 5 pin socket outlet 5/6 Amps on independent board including singal core stranded copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth doily complete all as specified and as directed.

All as per item No 104 hereinbefore but with cable 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm stranded copper unsheathed complete all as specified and as directed.

All as per item No 104 hereinbefore but with cable 4 Sqmm and earth continuity conductor of 4 Sqmm stranded copper unsheathed complete all as specified and as directed.

Supply and fix in repairs switch piano type one way 6 Amps flush type ,240 volt AC complete all as specified and as directed.

Supply and fix in repairs switch piano type one way 16 Amps flush type ,240 volt AC complete all as specified and as directed.

Supply and fix in repairs socket 2 in 1, 3/5 pin, 16 Amps flush type ,240volt AC complete all as specified and as directed.

Supply and fix in repairs socket outlet 2 in 1,3 pin 5 Amps complete all as specified and as directed.

Supply and fix in repairs switch piano type two way 6 Amps flush type ,240volt AC complete all as specified and as directed.

S & Fix in repair stepped type electronic fan regulator 120 watt ,240 olt flush type on the existing phenolic laminated sheet complete all as specified and as directed.

Supply and fix in repairs Bell push, flush type, 6 Amp flush type ,240volt AC complete all as specified and as directed.

Supply and fix in repair ceiling rose surface bakelite with three terminals complete including taking down rusted metal box and necessary platering work and finish with existing wall paint complete all as specified and as directed.

Supply & Fix Double pole Sheet matel enclosure box with a two pin and earth plug and socket complete with singal pole MCB 20 Amps and ncluding taking down complete all as specified and as directed.

Supply & Fix wall mounted extruded aluminium housing high quality indoor batten LED tube 20 watt (4ft long) colour temperature 6500 K (4" long) lumen 2000 -3000, PF> 0.9, THD less 15% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement and including taking down complete all as specified and as directed.

Supply & Fix wall mounted extruded aluminium housing high quality indoor batten LED tube 10 watt (2 ft long) colour temperature 6500 K (2" long) lumen 2000 -3000, PF> 0.9, THD less 15% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement and including taking down complete all as specified and as directed.

Supply and fix in repair electric bell Ding Dong, AC 230 volts and including taking down complete all as specified and as directed.

S & F sheet metal enclosures for double door distribution board factory made duly painted 4 way TPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators and including taking down complete all as specified and as directed.

S & F sheet metal enclosures for double door distribution board factory made duly painted 8 way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators and including taking down complete all as specified and as directed.

Supply and fixing miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP240V, 10 KA 'B' curve , in the MCB DB Complete with connection testing and commissioning and including taking down complete all as specified and as directed.

Supply and fixing miniature circuit breaker (MCB) of SPN and current carrying capacity 40 Amps 240V, 10 KA 'C' curve , in the MCB DB Complete with connection testing and commissioning and including taking down complete all as specified and as directed.

Supply and fixing MCCB 63 Amps, TPN, Breaking capacity 16 KA, 415 V 'C' curve adjustable type all as specified of capacity complete all as specified and as directed.

Supply & Fix Bldg security light Supply and fixing in replacement of LED building light luminaire 35 watt,pressure dia cast aluminium housing with heat resistant toughened glass & IP 66 protection and including taking down complete all as specified and as directed.

Supply & Fix lamp holder,PVC/Polycarbonale type with black plate suitable for batten fitting including taking down complete all as specified and as directed.

S & F steet light bracket made out of 40 mm dia light grade GI pipe 1.5 Mtr long bend to shape including necessary fixing arrangement with clamp of suitable size made out of 35x 4 mm MS flat suitable shape to pole including nut bolt 03 nos and washer complete all as specified and as directed.

S&F submain wiring with sheathed multi-stranded FRLS Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core HR Grade and one runs of 4 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB complete all as specified and as directed.Note :- 1.Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. Note 1: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

S&F submain wiring with sheathed multi-stranded FRLS Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core HR Grade and one runs of 6 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB complete all as specified and as directed.Note :- 1.Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.Note 1: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

M & L for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire size of 4.0 mm and length for continuity earth wire from test point to main distribution Board and all as directed. (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) After earthing contractor should test the earth value and submit register for earth resistance result to Engr-in-Charge. )

S&F of 9 watt, 0.6 Meter, LED Bollard light fitting alonwith its all accessories like potted electronic LED driver made out of Die cast base and opal acrylic diffuser having IP-65 protection and mechanical impact resistance rating od ik>=07. The fixture driver should have a minumum system efficacy of >80 lumen/watt. The fixture driver should have an operating voltage range of 140-170 Volt, surge protection of >=10KV, PF>>0.90, THD <20%. The fixture shall be designed for a system life of 50,000 hours. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters as per dircted by Engr-in-charge. The seller shall provide five years manufucturers, warranty for complete luminaire. Make Havells/ Everday/ Crompton/Bajaj as per sample approved by Engineer-in-Charge.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 Volts grade aluminum conductor of size 4 core 25 sqmm complete all as specified and as directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 Volts grade aluminum conductor of size 2 core 6 sqmm complete all as specified and as directed.

Excavation in trenches n.exc 1.50 m wide and not exc 1.5 m depth for foundation etc or for lying cable etc n exc 10 sqm on plan nd n 1.5 m depth nd getting out in spft/loose soil complete all as specified and as directed.

Returing, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soil complete all as specified and as directed.

Removing excavated materials not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M& L for dry river sand in trenches including spreading for cushioning of LT UG Cable complete all as specified and as directed.

M & L for sub class 'B' bricks old size laid flat dry in trenches over cable,across the direction of cable complete all as specified and as directed.

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed.

M/s Vijay Enterprises (BID ID -3161369)

Chaudhary Constructions (BID ID -3161212)

M/S ujjwal associates (BID ID -3167379)

k k enterprises (BID ID -3165844)

M/S Rohit Enterprises (BID ID -3167238)