Formation of Culvert in front of Wicket Gate in Analmin Nagar

Earth work excavation in all soils such as sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil and depositing on bank with an initial lead of 10m and lift of 2m including cost of all materials, labours, lead, lift, etc. complete.

Dismantling the existing damaged RCC for the required width & depth as per the instructions of engineer in charge and disposing the debris 1km away from the site including cost of all materials, labours, lead, lift, curing, etc. complete.

Chipping the existing floor & wall concrete and roughening the surface for future bonding and through cleaning the surface including cost of all materials, labours, lead, lift, curing, etc. complete.

Providing and fixing well point system for dewatering the ground water including hire charges for 2 Nos 10 HP vacuum dewatering pumps and a spare pump with 30 filters, operator cost of 3 shifts for 2 Nos 10 Hp and maintenance cost etc., complete.

Providing PCC 1:4:8 using OP/PP cement with 40mm size machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete.

Providing form work for concreting at all elevations and below GL to give medium smooth finish using steel shutters including cost of all labour, lead, lift etc., complete.

Providing centering and shuttering using steel structures & props 10 to 13cm dia, including cost of all materials, labours, lead, lift, etc. complete.

Providing RCC 1:11/2:3 using OP/PP cement with 12mm to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work.

Supplying & providing RTS/MS rod including cutting, bending, tying and fixing in position as per specification including binding wires, cost of all materials, labours, lead, lift, etc. complete.

Brick work in CM 1:5 using fly ash bricks (230x110x70mm) including cost of all materials, Labours, lead, curing, etc. complete

Plastering with CM 1:5, 20mm thick for brick wall surface including cost of all materials, labours, lead, lift, curing, etc., complete.

Plastering with CM 1:3, 12mm thick for concrete surface including cost of all materials, labour, lead, lift, curing etc. complete.

Providing Terrace tiles of single 200x200x20mm tiles using CM 1:3, mixed with crude oil 1% by weight of cement and pointing with same oiled mortar etc., including cost of all materials, lead, labours, lift curing etc., complete.

Colour washing Two coats without primer including cost of all materials, colour pigments, Fevicol, Labour, lead, scaffolding, curing, lift, etc., complete.

A.MURUGAN/GURU ENGINEERING (BID ID -1148289)