Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
27 Dec 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Mech and Hospital Division Doda
Office Of The Executive Engineer Mechanical and Hospital Division Doda
Creation of Multi Functional Commodity Facilitation Centre at Headquarter DSHO Kishtwar
2023_PWDJK_240733_1
MHDD/TS/2023-24/66
Open Tender
Civil Works - Others
Turn-key
60 days
DSHO KISHTWAR
As per SBD
2 documents required · 2 mandatory
₹10
Yes
Executive Engineer Mechnical and Hospital Div
₹80,000
Yes
30 Dec 2023
19 Dec 2023
27 Dec 2023
19 Dec 2023
27 Dec 2023
19 Dec 2023
Amount
Detail of Scope of Work can be had from SBD of the e-NIT
Clearing of site by employing labour, tool and tackle and leveling of ground by employing men and machinery for start of work. The job includes labour cost, hire charges of tools and tackles, machinery and taxes as applicable
Earthwork in excavation by manual means over area for leveling purpose including disposal of excavated earth up to 1m from cutting edge and should be disposed in near-by all kind of soil
Providing and laying of cement concrete (1:5:10) using 40mm nominal size nallah stone.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (one cement: Two coarse sand: Four Graded stone aggregate 20 mm nominal in size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and medium tensile steel bars for flooring
Centering and shuttering including strutting, propping etc. and removal of form work for: 4.6.1 Foundations, footings, bases for columns
12 mm cement plaster to plinth wall of mix 1 : 3 (1 cement : 3 fine sand)
Cement concrete flooring and foundation as per the site requirement 1:2:4 (1 cement : 2 sand : 4 graded stone finished with a floating coat of neat cement including cement slurry but excluding the cost of noising of steps Complete
Steel work welded in built up section/ framed work including cutting, hosting, applying a priming coat using structural steel. In gratings, frames, guard bard, ladders, railings etc. trusses including primer and enamel paint including nut bolts, kingpost, struts etc.
Supply and installation at site of Prefabricated PUF (Poly-Urethane Foam) Panels of size 60 mm thick Fire proof Panels for walls (PPGI finish on both sides) and 70 /100 mm thick Color Coated Corrugated PPGI sheet for Roof to make a closed structure on the outer frame including doors and windows (made out of Powdered coated aluminum of gauge not more than 12 mm) as per drawings approved by Engineer in charge.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)I including grouting the joints with white cement and matching pigments etc. complete
Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminum primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodized aluminum (with 15 micron anodic coating) T- sections35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia. M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of primer and paint as per Direction of Engineer Incharge.
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 mtr width as well as 10 sqm on plan including disposal of excavated earth, lead upto 50 meter and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil:
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up-to plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size)
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour& pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up-to plinth level with: 1:2:4 (1 cement : 4 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
Providing and fitting of following sanitary items in three nos bathrooms and make them fully functional:3 nos. English Seat with all accessories, 2 nos urinal pot with all accessories, 3 nos wash basin of size not less than 18” with all accessories 1no. Steel sink, 3 nos looking mirrors of appropriate size, Towel rods 3 nos., 3 nos Soap holder, P/F of Bib cocks and all other accessories. Providing and laying of 150 mm PVC pipe of reputed make for sewage from bathroom to soakage pit and 75 mm PVC pipe for urinal and wash basin. Providing and laying of PVC pipe of size 50 mm for water supply system to all the bathrooms from source to the bathroom along with all allied fitting and accessories. It also includes construction of main holes, PVC cover at the top of the main/check hole, fitting of gas pipe along with connections with the bathroom to make bathroom fully functional with all other allied accessories. The job also includes P/F of 2000 Ltr.P. V.C water storage tank along with all allied accessories and connections. The job is inclusive of all material cost, labour cost and taxes.
Providing, fitting, installation, testing and commissioning of 3 nos1.5 Ton split minimum 3 star type ACs (copper wound) Each unit must provide cooling and dehumidification and to be operated via remote control at 220/240 Ac supply with latest in-vogue features PVC pipe for drain shall be supplied and fitted complete with accessories such as bent, elbows, flexible connections, MS stand for outdoor unit of Split AC and Extra length of copper pipe for outdoor units as required. Job also includes P/F of 5 KVA automatic voltage stabilizer copper wound wall mounted of range 90-240 V including providing and fitting of 32A MCB along with 6 sq. mm copper wire for AC. Warranty shall be provided for 12 months from date of installation. The compressors shall be warranted for 5 years from date of installation.
Electrical fitting by way of Providing and fitting of 06 no. 20 watt LED Panel of size 600x600mm, 4 no. ceiling fans,6 no. exhaust fan 12”dia with lovers,4 no.20W 4’ Led Tubelight including Providing and fitting of 100W LED Flood Light. Job also includes Providing of laying of main service line 16 sq. mm from main pole to MCB box,63A change over It also includes providing of 2.5 sq.mm pvc wire, 4mm pvc wire, switches ,socket, conduit,, MCB and other allied items The job includes material cost ,labour cost and taxes
External Cold Room Dimension (L x B x H) : 12’-0’’x 12’-0” x 10’-0’’with 0.4 mm thick sheet (PPSS inside/PPGI outside) with following specifications.
Supply, Installation, Testing and Commissioning of silent type Diesel Generator set complete with Diesel engine, alternator and Manual control panel. The diesel engine and alternator shall be coupled or provided with flexible coupling and mounted on a base plate of robust in construction with prime rating of 50 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 v suitable for 50 hz ± 3%, three phase system and for 0.85 load factor and consisting of the followings:
Earthwork in excavation by manual means over area for leveling purpose including disposal of excavated earth up to 1m from cutting edge and should be disposed in near-by all kind of soil.
Providing and laying of cement concrete (1:5:10) using 40 mm nominal size nallah stone. Plinth work= 36.00 ft3Foundation for columns = 3.5 ft3Flooring = 64 m3Total = 103.5 ft3 = 2.93m3
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (one cement: Two coarse sand: Four Graded stone aggregate 20 mm nominal in size)
Centering and shuttering including strutting, propping etc. and removal of form work for: 4.6.1 Foundations, footings, bases for columns Area = 26.76 m2
12 mm cement plaster to plinth wall of mix 1 : 3 (1 cement : 3 fine sand) Area = 144 ft2 = 13.38 m2 Total = 13.38 m2
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
Cement concrete flooring and foundation as per the site requirement 1:2:4 (1 cement : 2 sand : 4 graded stone finished with a floating coat of neat cement including cement slurry but excluding the cost of noising of steps Complete
Steel work welded in built up section/ framed work including cutting, hosting, applying a priming coat using structural steel. In gratings, frames, guard bard, ladders, railings of trusses including primer and enamel paint including nut bolts, kingpost, struts etc.
Providing and fixing 0.50 mm pre-profiled colour coated corrugated sheets to laid over frame work of trusses columns, purlins and side rails using hot dipped zinc coated self drilling hexagonal washers, fastener etc
Providing of lacquered finish plastic chairs with cushion (Red Colour) of reputed make. The material of chair should be of high grade 100% virgin polymer which insure its longevity. Contemporary style designed for both indoor and outdoor application for the Multi Functional Common Facilitation centre at Sheep extension Centre Kishtwar. The cost include material cost, taxes , transportation/ loading/unloading at site. ( Sample to be approved by the Engineer in charge)
Providing of Plastic medium back chairs (without cushions) with arms having resting handle with hand rest and also having strong legs which ensures its durability of reputed make. The material of chair should be of high grade 100% virgin polymer which insure its longevity. Contemporary style designed for both indoor and outdoor application. The cost include material cost, taxes , transportation/ loading/unloading at site. ( Sample to be approved by the Engineer in charge)
Providing of one no. revolving/adjustable high back chair with PU foam seat and back of reputed make. Chair should have PU padded armrest along with tilt and swivel mechanism. The cost include material cost, taxes, transportation/ loading/unloading at site. ( Sample to be approved by the Engineer in charge)
Providing of particle board laminated office table having size not less than 4’-0” x 3’-0” x 2’-6” (lxbxh). The Table should comprise of three lockable drawers for storing important documents and one no. full height lockable storing unit. The cost include material cost, taxes, transportation/ loading/unloading at site. ( Sample to be approved by the Engineer in charge)
M/S A.S.I ENTERPRISE
RAHIL MENGI CONTRACTOR
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .