Installation of Led Mini Mast for Development of Green Space at Sukanta School Side Development in Ward no 19 within Konnagar Municipality. Under Amrut 2.0

Supply of 9 Mtr octagonal mini mast (GI tower Structure) complete with foundation bolts & round type bracelets suitable for 4/6 nos fittings. Dimension- Top Dia 70 mm, bottom dia- 150 mm, 3mm thick, base plate- 240*240*4 mm (Make:Bajaj/Transrail/valmond/Utkarsh/Skipper) KMDA vetted rate

Erection of 1 nos 9 meter long G.I. octagonal pole after preparation of RCC Foundation of 400mmX400mmX1500mm height (1200 mm below the ground level and above 300 mm on ground) with required rod, cement, chips & sand etc at the ratio 1:1.5:3 with ground bolt)

Supply, delivery of LED Flood light luminaries with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion with IP 66 & minimum output of 11000 lumen; Max wattage of 110 Watt (Make Philips) (Model- BVP192 LED 110 CW NB FG GR PSU) [4 Flood Light will be installed on each High Mast]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following size in the prelaid polythene pipe and by the prelaid GI fish wire and making necy connection as requires (a) 2X 22/0.3 (1.5 sqmm) PWD Sch Page-E-9; 1a For Internal Connection

Supply, delivery 1.1 KV grade XLPE insulted 2 core 10sqmm AL armoured cable (KEI, Havells, Polycab) (UDMA P-11; Item-C/1)

Laying of one no. cable upto 35 sqmm in underground trench 460 mm wide X 760 mm average depth with brick protection on the top of the cable with 8 (eight) nos. bricks per metre & cable and also trench with shifted soil, levelling up and restoring surface dulu rammed [PWD SOR 2017 Page No. F-2 Item No, 1a]

Fixing only Flood Light Fittings with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. PWD Sch Page-C-3; Item 20a

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing material: 2 core 10 sqmm cable [PWD SOR 2017vpage no-F-5; item No.-8b

Supplying and Fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cables as below: For 2 core upto 10 sqmm [PWD SOR 2017 Page No-F-4, Item No- 7a

Supply, Fixing of Outdoor type single door feeder piller box over all diameter approx 900mm x 550mm x 380mm fabricated with 3 mm thick CRCA sheet from side hinger door with locking arrangement and having angle iron mounted legs, installed in brick cement foundation 1:6 plastering, 12 mm thick neat cementing, painting etc 32A DP MCB Isolator(legrand) 1 Nos MNX 50 Contractor (L&T) 1 Nos Digital Timer Switch(L&T) 1 Nos Toggle switch Terminal Block 32A DP MCB(L&T) 1 Nos

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mtr long and 1x4 SWG GI (HOT Dip) wire (4 mtrs. Long), 13 mm dia x 80mm long GI bolt, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 mtr. Long) to be filled with bitumen partly under the ground level driven to an average depth of 3.65 mtrs. below the ground level as below: By TATA-Medium GI pipe [PWD SOR 2017 Page No-G1, item No-2a

WBSEDCL connection charge (Single Phase supply & Meter unit if required)

GST 18% (CGST9% + SGST9%)

WELFARE CESS 1%