SPECIAL REPAIR TO BLDG NO P 14 BY 2 P 16 BY 1 P 18 BY 1 OR MD ACCN OF 436 COY ASC SUP TYPE A AT RWA 8 AND PROVN OF SECURITY WALL NEAR ADM BLOCK AT 5221 ASC BN MT BAIRAGARH UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description including terrazo finish as in dado/ skirting of any description on brick or stone walls etc; including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick ready mix plaster on brick/stone or concrete surface, finishing the surfaces fair and even without using extra cement complete all as specified and directed. Make: Ultratech Readyplast/ JSW Enduraplast/ Hisan Industries

M&L for 10 mm thick ready mix plaster on brick/ RCC/ stone wall/ceiling finishing the surfaces fair and even without using extra cement complete all as specified and directed. Make: Ultratech Readyplast/ JSW Enduraplast/ Hisan Industries

M&L for preparation of old decorated surface of walls and applying two or more coats of damp proof coarse (Primeless high build water based elastomeric exterior wall waterproof acrylic coating for exterior surfaces) designed with weather resistant acrylate polymers, UV resistant and good hiding and spreading, developing a strong intercoat adhesion with the substrate therefore no separate primer is required, features such as waterproofing, UV protection, anti algal resistance, crack bridging of elastic films covering hair line cracks, long term protection, colour variants including preparation of surfaces by cleaning the surfaces till it is free from dust, grease, flaking paint, algae, fungus etc (any unstable paint to be removed) using high pressure wash or scraper or any appropriate method and shall be treated with fungicidal solution, all surface cracks upto 5 mm width should be filled up with high-quality, weather-durable acrylic emulsion polymer and cracks more than 5 mm and all separation gaps should be filled up with URP modified mortar complete all as manufacturer instructions and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved shade with and including applying a coat of 1.5 mm thick white cement based wall care putty as per manufacturer specifications complete all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying two coat white wash complete all as specified and directed.

Taking down existing water proofing treatment of any description including PCC padding, cement plaster of any thickness from roof surfaces and then cleaning of roof and prepairing it for further treatment including necessary dubbing out wherever required and removing rubbish from the site complete all as specified and directed.

M&L for provision of water proofing roof treatment to RCC roof with APP modified membrane of non woven polyster duly reinforced of wt not less than 3 Kg/Sqm and of thickness not less than 3 mm having thermal insulation with white plain mineral or gravel finish on upper side of membrane, uniformely embedded during manufacturing process complete all as specified and comprising of following specifications:-

(a) Providing 10 mm thick plaster in CM 1:4 mixed with and incl water proofing compound @ 3% by weight of cement applied over roof slab and after the plaster is cured, the roof will be tested for water tightening by ponding by filling water for seven days for any seepage / leakages etc; and if any seepage is oberved, the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout and repaired slab will again be tested for watertightness before processing further treatments.

(b) Surface of the roof, parapet and gutters, drain mouths etc. over which water profing treatment is to be applied shall be cleaned from all foreign matters such as fungus, mass, dust etc; by wire brushing and cleaning, all cast iron drain outlets the groove shall be cut around to tuck for treatment as pipes, chimney, stacs and other similar situations.

(c) Applying a coat of bituminous primer conforming to IS: 3384-1965 @ 0.30 Kg/Sqm on prepared surface till the surface is properly impregnated.

(d) Applying APP modified water proofing membrene as specified on primed surface by torch application method as per manufacturer instructions and the overlaps while torching shall be 100 mm in both directions (longititudinal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrene layers and sealing it with the help of hot trowel, the overlap joints shall be made as monolithic layer.

(e) All joints & changes in direction should be curved with cement motor 1:3 mixed with SBR latex @ 200 ml per bag of cement and cured well before laying the membrane.

(f) Providing fillet of PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) of 100 x 100 mm shall be provided of curved section at all junctions of vertical and horizontal surfaces and whereever there is a change of direction.

Taking down chowkhats or frame n exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

M&L in replacement of powder coated aluminium fabricated work as in doors, windows, partition as per manufacturer instructions including necessary jointing cleats, anodised aluminium snap beading including taking down damage portion of damage doors, windows or in full complete all as specified and directed. Note: Rates are inclusive for necessary new hardware fittings for door/window and filling of gap between wall and window by silicon gel.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ chowkhat high density of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and directed.

S&F of factory made solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per manufacturer instructions complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement all as shown in SSR Part - II complete all as specified and directed.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter high density of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw with drawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Butt hinges shall be measured and paid separately.

S&F of factory made 30 mm thick solid WPC wire mesh door shutters decorative type laminated of required size comprising of virgin PVC resin of K Value 57-60 (Suspension grade), calcium carbonate and natural fibres (Wood wood powder/ rice husk/ wheat husk) and non toxic additives , made from exrusion process WPC foam sheet single extruded (Inner) with having min density not less than 600 Kg/Cum , having good screw holding capacity (Screw withdrawl strength 2000 N (face) & 1100 N (Edge), Min compressive of 50N/mm2, modulas of elasticity 850 N/mm2 and resistence of spread of frame of class A catagory with property of being termite / borer free, water/ moisture proof and fire retardent. WPC to be laminated with PVC foil of min 14 microns thick of approved design pasted on both faces of shutter. For fixing mosquito mesh and XTN aluminium mesh combinely panel area of door except styles and rails to be panelled with mesh with self tapping round headed screws at required distance, screws and edges covered with feathered PVC edge beading alround of mesh complete all as specified and directed. Note: Butt hinges shall be measured and paid separately.

S&F of 150 mm long stainless steel handles ISI marked, cast type amd fixed with SS screws complete all as specified and directed.

S&F of 150 mm long stainless steel tower bolts ISI marked, extruded section and fixed with SS screws complete all as specified and directed.

S&F of 100 mm long stainless steel butt hinges ISI marked, extruded section and fixed with SS screws complete all as specified and directed.

S&F of 300 mm long stainless steel sliding door bolts with hasp stapple (bolt type) ISI marked and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections and fixed complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, gate etc with ends of bars & plates souldered and/or riveted or forged into spikes, framed guard bars barred iron dors ladders framed balusters walkways, railing, frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc; laid bedded and pointed in any mortar complete all as specified and directed.

M&L for granite stone slab work (any type) 16-18 mm thick, machine cut as in steps, jambs, cooking platform and similar works over and including 15 mm thick screed bed in CM 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incluing grinding and polishing complete all as specified and directed.

M&L for Dholpur stone work with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20 mm), about 40 mm high, 75 mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 complete all as specified and directed.

Demolition of cement concrete in ground floor (unreinforced), paving n exc 15 cm thick (below or above GL) including tiling work complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the permises complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floor, rough finished surface to receive floor finishes complete all as specified and directed.

M&L for vitrified ceramic coloured double charged tile, 7-8 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors over and including 15 mm thick screed bed in CM 1:6; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for vitrified ceramic coloured double charged tile, 7-8 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm on vertical surfaces such as skirting, dado and risers to steps etc; over and including 10 mm thick rendering in CM 1:4; set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for dark coloured glazed ceramic tiles of size 450 x 300 x 7 mm thick on vertical surface such as skirting, dado and risers to steps etc; over and including 10 mm thick rendering in CM 1:4; set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors over and including 15 mm thick screed bed in CM 1:6; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for machine cut kota stone slab flooring, 18-20 mm thick, laid over and including screed bed of 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for water proofing treatment to sunken surfaces of slab complete with and comprising of following sequences:- (a) Slope correction by providing PCC 1:1.5:3 type A-0 (using 12.5mm graded stone aggregate) of average thickness 25 mm and mixed with integral water proffing compound "DITCHTMENT DM' manufactured by Dr fixit or Pidiproof LW + of M/s Pidilite Industries or STP No 1 (Liquid) of M/S STP Ltd as approved by GE as per manufacturer instructions. (b) Applying evenly a priming coat of bituminous primer confirming to IS: 3384 @ 0.7 Kg per Sqm on prepared surfaces. (c) Applying evenly a coat of hot blown bitumen of grade 85/25 @ 1.5 kg/sqm on the primed surfaces. (d) Laying of 150 micron thick black polythence film on the suface with 10 mm overlaps duly sealed and bounded the surface. (e) Finally applying evenly a coat of hot bown of grade 85/25 @ 1.5 kg/ sqm on the surfaces. (f) 48 hrs testing for water thightness by ponding of water.

S&F of aluminium extruded body door closer, hydrulically regulated, designation no 3 universal type, suitable for door shutter of 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs 20mm dia stainless steel curtain rods, fancy type, with and including fixing brackets, stops etc. complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of hardstanding, finishing surface even and rough complete all as specified and directed.

M&L for clean dry sand cushioning for laying of Interlocking paver block complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block reflective type (glossy finish) any shape and size of 60 mm thick, M-35 Grade with grey cement and pigments to match with existing complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, finished fair and even, laid in bays n exc 2 m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.

S&F in repairs vitreous china wash basin, white flat back size 550x400 mm with and including 32mm CP waste coupling, waste pipe and brackets and fixed in position complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, brass, fancy type, chromium plated, screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa" pattern of size 580x440 mm, white, with integral foot rest (exculding flushing cistern and flush pipe) but including cement concrete bedding and making good to existing floor complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 ltrs capacity with all internal fittings, 32 mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers and making connections complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board of 1.00 mm thick sheet for kitchen with plug, washers, CP waste coupling, waste pipe etc. including bedding in cement mortar 1:4 on to dwarf/ parapet wall or fixing with granite slab and pointing to match and connecting union to pipe of overall size 915 mm x 460 mm & bowl size 410 mm x 330 mm x 160 mm and fixed complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe of 15 mm bore complete all as specified and directed.

S&F in repairs 5 mm thick looking mirror of approved quality with wooden back and edge beading duly french polished complete and fixed with screws to wall complete all as specified and directed.

S&F in repairs chromium plated/SS grating doom 100 mm dia with or without waste hole complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm and fixed complete all as specified and directed.

M&L for providing 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, brass, fancy type, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete as specified and directed.

Taking up or down 20 mm bore GI steel tubing and connections complete all as specified and directed.

S&F of 20 mm bore GI tubing medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections complete all as specified and directed.

S&F of 15 mm bore GI tubing medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs, precast man hole covers and set in CM 1:4 complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal and fixed with solvent cement complete all as specified and directed.

S&F in repairs 110 mm dia PVC (SWR) bends any radius and fixed with solvent cement complete all as specified and directed.

S&F of 110 mm dia PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with MS clamps complete all as specified.

S&F of 75 mm bore PVC (SWR) bends of any radius with access door and fixed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) junction (single T) with access door and fixed with solvent cement complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack, made up of 0.63 mm thick stainless steel sheet, overall minimum size: 900 x 750 x 250 mm, fixed to walls with chromium plated brass screws complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.

S&F in replacement 18/19 mm thick WPC panels for kitchen cabinet, fixed with nails / screws to timber frame-work as per existing shape and size with stainless steel butt hinges and necessary screws complete all as specified and directed.

S&F in repairs 40 mm dia cupboard/kitchen cabinet brass knobs, fixed with nuts, screw and washer complete all as specified and directed.

S&F in repairs kitchen basket fabricated with stainless steel section (SS-304) of size 430 x 508 x 200 mm for different use such as placing plain plate/ dish/ cup & saucer/ cutlery/ thali etc; with and including fixing in position on one pair of telescopic channel of size 450 mm long (when closed) of mild steel chromium plated, roller type, heavy duty complete all as specified and directed.

S&F in replacement decorative laminate 0.9 mm thick, type 1 of surface finish, colour and pattern as approved and fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard/dense soil complete all as specified and directed.

Demolition and breaking up 200 mm bore drain pipes (SGSW, AC, RCC or PVC), set in cement mortar with and including removal of unservicable materials and rubbish to a distance not exceeding 100 m complete all as specified and directed.

M&L for 200 mm dia reinforced concrete pipes with collars, class NP-2, laid and jointed with neat cement slurry complete all as specified and directed.

M&L for concrete bed to 200 mm dia drain pipes in cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

Removal of surplus spoil/excavated material to a distance upto 100 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as sspecified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

Use and waste for form work to sides of concrete foundations, footings bases of columns, raft and raft beams, sides and soffits (if any) of foundaton and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces complete all as specified and directed.

M&L for reinforcement cement concrete type M-25 grade design mix for foundation, footings, plinth beams, bases for column etc complete all as specified and directed.

Use and waste for form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for reinforced cement concrete type M-25 grade design mix as in columns and similar works complete all as specified and directed.

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for reinforced cement concrete type M-25 grade design mix as in roof beams and similar works complete all as specified and directed.

S&F for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base, finishing surface even and rough complete all as specified and directed.

M&L for makrana white marble work 18 to 20mm thick (table rubbed and polished) as in floor/ platform/ skirting and like over and including 15 mm thick screed bed in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with multi-stranded copper conductor stranded copper conductor cable of 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc. (ISI marked) with modular metal flush box as per requirement (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally and with modular cover plate as required for fixing of switches, sockets and fan regulators etc; with and including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-

(a) One light/ fan/ bell point controlled by one, one way switch.

(b) One 3 pin socket outlet, 5 Amps on independent board.

(c) One 3 pin socket outlet, 5 Amps on same board.

All as per item No. 95 here-in-before but wiring for 5/15 Amps switch/ socket on independent board with 2.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade and 2 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly.

S&F of modular switch, flush button, single pole, one way, 6 Amps, 240 volts complete all as specified and directed.

S&F of ceiling rose surface bakelite, three terminals, 230 volt AC complete all as specified and as directed.

S&F of lamp holder (Angle holder) PVC/ polycarbonate type cased body with back plate suitable for pendent fittings with and including LED bulb of 9 Watt capacity complete all as specified and directed.

S&F of modular type electronic regulator flush type, 120 Watts of two module complete all as specified and directed.

S&F of modular socket outlet, 2 module multipurpose having provision for 5 pin, 6 Amps, 230 volt AC complete all as specified and directed.

S&F of modular socket outlet, 2 module multipurpose having provision for 3 pin, 6/16 Amps, 230 volt AC complete all as specified and directed.

S&F of modular switch piano, one module, single pole, one way, 16 Amps, 240 volt, 50Hz, AC complete all as specified and directed.

S&F of Buzzer, Ding Dong type, AC, 230 Volts, single pole complete all as specified and directed.

S&F of modular Bell push, two module, single pole, 5 Amps, 240 Volts AC complete all as specified and directed.

S&F of sheet metal earth plug & socket, single pole and neutral with and including 1 no. single pole MCB 20 Amps 240 volts complete all as specified and directed.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100 V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. of 25 mm external diameter and PVC insulated stranded copper conductor of 6 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. Note: Three runs of 6 sqmm cable, one run of 4 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

S&F of LED 20/21 Watt tube light fitting (T8 type) including LED retrofit tube 20/21 W one side connection type, 240 V, PF > 0.90, colour temp 6500 K, system luminious efficacy > 100 Lm/W complete with powder coated CRCA decorative patti suitable for surface mounting on wall complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core and PVC round block white colour 2 Nos for mounting fitting complete all as specified and directed. Make: Havells cat Part No. BS20WLED840SPCWH/ Orient Cat Part No -LTRAQ-24-C/ Bajaj Cat Part No-830414 as approved by GE.

S&F of LED 9/10 Watt tube light fitting, surface mounting fitting for mirror light with slik and light weight batton, 240 Volt, with PF >0.95, efficacy >95, colour temp 6500 K complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core and PVC round block white colour 2 Nos for mounting of fitting complete all as specified & directed. Make:- Havells cat Part No. BS10WED865SPCWH/ Orient Cat Part No -LTRAQ-24-C/ Bajaj Cat Part No-830414 as approved by GE.

S&F of storage type steel body with glass line stainless steel inner tank nad heating element upto 2 KW electric water heater of 25 ltrs capacity with BEE 5 star rated, 230 Volts, max power consumption 2 KW, wall mounting type complete with all accessories such as safety valve, thermostat, NRVs, PVC connection pipe of 15 mm bore & 450 mm long- 2 Nos for Hot & Cold water supply and mounted on wall using wall fasteners and testing on completion complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB, SPN, 240 Volts, 200 amps rated bus bar, 12 way double door enclosure made of CRCA sheet steel, RAL 9003 powder coated, IP 43, mounted on including wooden rectangular board of first class hard wood of suitable size complete all as specified and directed.

S&F of RCCB, 30 mA, 40 Amps, SPN for earth leakage protection complete all as specified and directed.

S&F of MCB, SP, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 6 to 32 Amps including making connection with suitable size aluminium / copper lugs complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to E/M storeyard complete all as specified and directed.

S&F of exhaust fan 300 mm sweep of steel body, AC single phase, 230 Volts, 1400 RPM with blades, frame and louvers with and including all civil work such as cutting circular opening in existing wall of kitchen and making good disturbed surfaces as per existing including connecting up fan with twin core twisted flexible copper conductor cable ofsuitable size complete all as specified and directed.

Taking down & refixing old electronic meter in its existing position and making necessary connections complete all as specified and directed.

M&L for earthing complete with galvanised steel plate earth electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of size 4 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 x 40 x 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 15 mm dia GI pipe medium grade for watering, 15 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 500 litres, hoisted including all fittings as required and fixed in position complete all as specified and directed.

S&F in replacement 25 mm bore GI tubing medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs 20 mm bore PVC float valve, high pressure of PTMT with epoxy coated aluminium rod and hight density plastic ball and fixed with fittings such as socket, nipple, union etc complete all as specified and directed.

S&F in repairs Gun-metal gate valves of size 25 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

M&L for Sub Class 'B' bricks locally available of best quality, laid in trenches above sand cushioning for cable protection complete all as specified and directed.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc; including taking out old unserveciable cable, any type complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 49242.00

RAJPATI CONSTRUCTION (BID ID -3369125)

BRIJLAL UPADHAYA (BID ID -3372609)

SHIV SHANKAR MISHRA (BID ID -3372700)

M/s VIKAS TRADERS (BID ID -3372590)