SPL REPAIR TO BLDG NO 282 AT UMROI MIL STN UNDER GE UMROI

Amount

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick works finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, chajja, fins, facia etc. any height mixed with water proofing compound @ 200 ml per 50 kg of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed. Note: (i) Integral waterproofing compound shall be measured and paid separately. (ii) Cost of scafolding, any height are deemed to be inclusive in the quoted rate.

Supply only Liquid water proofing compound

Material and labour for 5 mm thick rendering in cement mortar (1:3) on concrete surface as in ceiling/chajja finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for applying three coats of white wash on ceiling including preparation of new or previously untreated surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer complete all as specified and directed.

M & L for complete removal of existing finishes and treating with two coats of oil emulsion distemper (any colour/tint) over a coat of primer complete all as specified and directed.

Material & Labour for preparation of new plastered surface of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Material & Labour for preparation of old plastered surface of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coat of white wash on ceiling surfaces complete all as specified and directed.

Dismantling AC/CGI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating PPGL based corrugated/Trapezoidal steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating PPGL based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eave board, fixed with self tapping screws, complete all as specified and directed.

S & F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts and washer in roof, wall etc. complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick CM 1:4 screed bed for laying of floor finishes complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering (backing coat) in CM 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls etc, laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over and including 20mm thick cement screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M & L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding. 4.00 sqm each complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Refixing shutter in same opening after repairing complete, size of shutter exc 1.00 Sqm but not exc 2.00 Sqm complete all as specified and directed.

Supply and fix aluminium anodised (powder coated) Three track sliding window frame with shutters with ( 2 Nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 4 mm thick plain glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc including aluminium grill of thickness 5mm and opening not exceeding 75mmx75mm etc with the following section of frame and shutter complete all as specified and directed:- (a) Sections for shutter:- (i) 'H' section: 39 x 20 x 1.20 mm thick (ii) 'Interlock' section: 39 x 20 x 1.20 mm thick (iii) 'Edge & Bottom' section: 41 x 20 x 1.20 mm thick (b) Section for frame:- (i) Top & Sides: 92 X 29.50X 1.20mm thick (ii) Bottom: 92 X 29.70 X 1.20mm thick

Supply and fix aluminium anodised (powder coated) ventilator frame (section for frame 63.5 X 38.1X 1.40mm thick) with shutter(section for shutter 41 x 20 x1.20mm thick)(bottom half portion fixed and top half portion with louver including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 4 mm thick frosted glass to aluminium frame work and louver using rubber gasket and fixed with stainless steel wire cloth of 0.36 mm dia and average width of aperture 1.40 mm outside vent with staple and suitable wall angle of size 25.4 x 25.40 x 1.1mm thick and fillets with screws and washers etc including Deco Grill of Model / Design No. DG 104 and 6.3mm thick etc. complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube and fixed as per manufacturer instructions complete all as specified and directed.

S&F plain colour Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement & fixing in the frame at site as per specification & drawing etc complete all as specified and directed.

S & F anodised aluminium frame, powder coated (minimum thickness 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F Anodised aluminium powder coated (minimum thickness 50 micron) door shutters, aluminium section weighing 0.75 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, lock, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Supply & fixing sheet glass ordinary quality 5.50m thick glazing in square/ rectangle not exc 0.50 sqm each pane with oil putty or aluminium beads fixed to steel frame, etc. complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Supply & fixing sheet glass ordinary quality 4mm thick glazing in square/ rectangle not exc 0.50 sqm each pane with oil putty or aluminium beads fixed to steel frame, etc. complete all as specified and as directed.

S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed.

S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&F 10 litres Capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern & fixing high or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed.

Supply and fixed in repair vitreous china squatting pan, Orissa pattern of size 580 mm x 440mm white with P or S trap, front or back inlet and integral foot rest (Excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair wash hand basin, white, flat back of size 550 x 400mm excluding pillar taps but including waste coupling, waste pipe and bracket, etc.including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

Taking down eaves gutters, sewage lines and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swannecks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 160mm bore PVC(SWR) soil/RWP pipes single socketed in any length with rubber ring joints fixed to wall including necessary scaffolding upto any height complete all as specified and directed.

S & F 160 mm bore PVC (SWR) bends any radius with access door fixed with rubber ring joints fixed to wall including necessary scafolding upto any height complete all as specified and directed.

S&F for 160mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with access door including necessary scafolding upto any height complete all as specified and directed.

M&L for 100mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, including making good disturbed area/surfaces with cement concrete/cement mortar 1:2:4 etc including taking down old unserviceable Nahani/Floor trap complete all as specified and directed.

S&F in repairs 15mm dia Bib tap, fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15 mm size stop valve, fancy type, chromium plated with long shank and cup(concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union & fixed complete all as specified and directed.

S&F in repairs 15 mm dia pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls etc complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level) and removing debries from site of work complete all as directed by the Engineer-in-Charge.

M & L for 50mm thick PCC type B-1, 1:2:4 (20mm graded stone aggregate) as in floor complete all as specified and directed.

M&L for 75 mm thick cement concrete type C1 1:3:6 using 20 mm graded stone aggregate as in plinth protection finished fair and even with using extra cement complete all as specified and directed.

Material and labour for taking down of existing roof treatment from roof and terrace, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust etc and applying roof treatment with the following steps and specifications:- a) Applying cement slurry over concrete surfaces @3kg/sqm. b) Rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound @ 3% by weight of cement or @ 200ml per 50 Kg of cement or as per manufacturer's instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof (levelling course). c) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @0.25 litres per sqm conforming to IS : 3384-1986. d) Applying evenly one coat of blown hot bitumen of grade 85/25@ 1.20Kg square metre on primed surfaces. e) A layer of APP based polymeric membrane, 3mm thick (minimum), weighing 3.5 kg/m2 reinforced with polyster non woven fabric (weighing not less than 160gms/Sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. f) Applying evenly one coat of aluminium paint @ 0.10litre per square metre over the APP based polymeric membrane.

Material and labour for preparation of old painted steel based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint to steel truss, etc. in any height of building complete all as specified and directed.

S&F in repairs PVC connection of size 15 mm dia, 450 mm long with PTMT nuts complete all as specified and directed.

Dismantling water tanks exc 250 litres capacity and n.exc 500 litres capacity and removing to store complete all as specified and directed.

Supply and fix rotational moulded,multilayer HDPE water storage tank of 500 litres capacity( tripple layer wall construction, cylindrical vertical with closed top) ISI marked, hoisted and fixed in position all as specified in SSR Part I including 02 Nos 20 mm bore full threaded GI nipple of required size including ball valves 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210gms) and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed

S & F in repair Steel rolling shutters 1.25 mm laths thickness, with out ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete, gear operated type with bevel gear box and crank handle complete all as specified and as directed.

Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. to be measured separately) and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by the Engr-in-Charge.

Taking down carefully MCB DBs SP/TP by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed.

Material and labour for point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including concealed conduit including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed :- Note:- The quoted rate shall deemed to be inclusive for cutting chases and making good the existing surfaces for complete concealed wiring.

One light/fan point controlled by one,one way switch.

One 3 Pin 5 Amps socket out let point on independent board.

One 3 Pin 5 Amps socket out let point on same board.

All as per item No 67 here-in-before but using 2.5 sqmm PVC FRLSH insulated copper conductor wire for connecting 15A socket on independent board complete all as specified and directed.

Supply and fixing in repair switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specified and directed.

Supply and fixing in repair socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) on same board complete all as specified and directed.

Supply and fixing in repair switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) in independent board complete all as specified/ directed.

Supply and fixing in repair switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) in independent board complete all as specified/directed.

Supply and fixing in repair ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified and directed.

Supply & fixing in repair ceiling fan regulator electronic,Deluxe,rotary, step type, 120/280 V complete all as specified and directed.

Supply & fixing in repair of ceiling fan 1200 mm (minimum) sweep, BEE 5 star rated with BLDC technology, AC single phase 230 volt, without remote Suspended from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose to ceiling rose/fan complete all as specified and directed. Make:- Usha Model- ENERGIA 32, Havells Model- EFFICIENCIA NEO or equivalent in Orient/Bajaj. Note:- Old unserviceable ceiling fans shall be deposited to MES store.

Supply and fix in repairs MCB TPN DB 8 way double door, IP 43 protection, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed.

Supply and fix MCB SPN DB 8 way double door, IP 43 protection, Glazed door, isolated neutral bar,insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed.

Supply and fix MCB TPN 63 to 100 Amps 'B' Series 10 Ka, 240 volts complete all as specified and directed.

Supply and fix MCB TPN 40 Amps 'B' Series 10 Ka, 240 volts complete all as specified and directed.

Supply and fix MCB SPN 32 Amps 'B' Series 10 Ka, 240 volts complete all as specified and directed.

Supply and fix MCB SP 6 to 32 Amps 'B' Series 10 KA,240 volts complete all as specified and directed.

Supply and fixing Bulb holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified and directed.

Supply and fix in repairs of LED batten fitting 1x20 watts including tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including Provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23.0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.

Material & labour for sub main wiring with two runs of single core, FRLSH 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn through and including PVC casing caping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and one run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 4 sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring along with damaged casing caping from wall or roof or floor and making good disturbed surfaces complete all as specified and directed. Note : Two run of 6 Sqmm cable, one run of casing caping and one run of 4 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run.

Taking down and refixing old serviceable high bay light/flood light in same/new location of ceilings, roofs/truss, etc. including provision of clamps, hooks, nuts & bolt, PVC conduit pipe, PVC cable whereever required complete all as specified and directed by Engr-in-Charge Note: The unit rate are deemed to be inclusive of provision of new clamps, hooks, nuts & bolt, PVC conduit pipe, PVC cable whereever required.

Supply and fixing in repair 80 watt round highbay in PDC housing and toughened glass suitable for industrial application. The luminaire should have efficacy of 110lm/w, 10KV SPD & ingress protection of IP66 with additional safety chain complete all as specified and directed. Note: (i) The unit rate are deemed to be inclusive of provision of new clamps, hooks, nuts & bolt, PVC conduit pipe, PVC cable whereever required. (ii) Old unserviceable lights with all acessories obtained shall be deposited to MES Electrical Store.

Supply and fixing or laying in repair UG cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor,1100 Volts grade,cross section area 06 sqmm 2 core complete all as specified and directed.

Schedule of Credit

M/S D.R enterprise (BID ID -3344039)

M/s UB Enterprise (BID ID -3337440)

M S Umesh and Co (BID ID -3343394)

M/s Nishi Kumar Das (BID ID -3345948)

M/S DIL SINGH BISWA AND CO (BID ID -3343955)

M/S BISWA CONSTRUCTION (BID ID -3343966)

M/s A L Traders (BID ID -3343595)