MISC BR REPAIRS IN CERTAIN STORAGE SHEDS INSIDE COD KANPUR CANTT UNDER AGE BR I OF GE I KANPUR

Amount

Dismantiling of AC sheet (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Regular modified Polyester colour coated galvanized steel rib profile sheet (TCT) 0.50mm thick E-42 (inclusive of protective coating ) having total mass coating of 150 Gms/Sqm on both sides as per IS-14246:95 (JIS:3312 polyester coating 30-40 micron) as in roof etc fixed etc fixed to iron / wooden members with self drilling zink alluminium coated metal screws of suitable size having cap with rubber washers complete all as specified and directed. Make: (a) Lloyd Insulation (b) Tata bluescope steel building solutions Ltd.(c) Prestar Infrastructure Project Ltd (d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd (g) Everest Industries

S&F plain regular modified Polyester colour coated galvanized steel sheet (TCT) 0.50mm thick E-42 (inclusive of protective coating ) as in ridge, valley , gutter and total mass coating of 150 gms/sqm on both sides as per IS-14246:95 (JIS:3312 polyester coating 30-40 micron) as in roof etc fixed etc fixed to iron / wooden members with self drilling zink alluminium coated metal screws of suitable size having cap with rubber washers complete all as specified and directed. Make: (a) Lloyd Insulation (b) Tata bluescope steel building solutions Ltd.(c) Prestar Infrastructure Project Ltd (d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd (g) Everest Industries

Fixing only old serviceable 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. including stacking the serviceable materials and disposal of unserviceable material, debris and disposal of rubbish outside MD land complete all as specified and directed.

M&L of Brickwork with fly ash bricks, old size straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per Item No. 06 here in before but except bricks complete all as specified and directed. Note: Old unserviceable bricks shall be reused after cleaning and proper stacking of bricks retrieved from item no 05 herein before.

Taking down cement plaster on bricks or concrete surfaces including raking out joints for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1 : 4 on stone masonry surfaces or surface other than fair face of brick work of walls finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

S&F rolled section of angle, tee or other section Fe-290 Gde E-165) as in framing for cladding, glazing, ventilator and the like fixed with angle cleats and connecting plates etc complete all as specified and directed .

S&F steel wire fabric not exc. 4 kg/ Sqm in wood or steel members and fixing through welded etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

S&F Providing precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and set in cement mortar (1:4) in window or door cills, lintels, bressumers, steps, quoin blocks with plain fair faces, including chamfers,weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed . Note: Reinforcement shall be measured and paid separately.

M&L for TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L TMT Mild steel bars 6 to 8 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required incl cranking, bending spirally for hooping for coloumns, hooking ends and binding with & incl mild steel wire (annealed) n.less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling structural steel work including doors, gates, wind ties etc but excluding framed truss etc complete all as specified and directed.

S&F mild steel in framed work as in doors or gates of angle or other section with gusset plates,rail,braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering) and hanging also fastening and fixing complete for Fe-410- W(Gde- E-250) quality-B complete all as specified and directed.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

All as per Item No. 22 above but refixing old wind ties retrieved from dismantling of AC/CGI/PGI sheet complete all as specified and directed.

Dismantiling of CGI/PGI sheets of any thickness as in roof coverings complete all as specified and directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with zinc coating 120 Gram/Sqm two corrugations side lap & 150 mm end lap, fixed with 'L' type or 'J' type or crancked hook bolt and washers or with self drilling zinc aluminium coated metal screws of suitable size having cap with rubber washers as in roof covering/vertical surfaces complete all as specified and directed. Make - SAIL/TISCO/RINL/JSW Steel Ltd

All as per item No. 25 here in before except sheet complete all as specified and directed.

S&F 0.63 mm thick PGI sheeting of class -VIII as in ridges, hips, valley gutters, wall cladding and straight flashings etc, fixed with 'L' type or 'J' type or crancked hook bolt and washers sealed the joint of valley gutter with commercial bitumen 80/85 grade or with self drilling zinc aluminium coated metal screws of suitable size having cap with rubber washers as in roof covering/vertical surfaces complete all as specified and directed.Make - SAIL/TISCO/RINL/JSW Steel Ltd

Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work complete all as specified and dorected.

Dismantling timber framed work i.e wooden roof truss etc spanning up to 12 metres complete all as specified and directed.

S&F rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, and watch tower structure rails fastenings and heavy bracket frames beam, tee, channel or flat sections including distance pieces, cleats etc. and similar work confirming to Fe-410 W Gde E-250 Quality 'A' complete all as specified and directed at site.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Demolition of cement oncrete in ground floor and pavings not exc 20cm thickness below or above ground level and disposal of unserviceable material, debris and disposal of rubbish outside MD land complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8, type D-2 (40mm graded stone aggregate) as in sub base finished even and rough to receive floor topping complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4, type B-1 (20mm graded stone aggregate) for flooring surface finished even and smooth without using extra cement laid as in alternate bay complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6, type C-1 (20mm graded stone aggregate) for plinth protection surface finished even and smooth without using extra cement complete and joints filled with hot bitumen 85/25 grade or VG-10 and sand in 1:3 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

Demolition of cement concrete in any position, roof above ground level and disposal of unserviceable material, debris and disposal of rubbish outside MD land complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping, roof kerb incl hunching, benching, covering rounded or chamfered angles including formwork complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not exc 10 cm in width or girth when unconnected with other painting or when painted in different tint and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Note for all items of BOQ: (i) Entire work listed in BOQ shall be executed in Restricted area. (ii) No electricity will be provided by the department and contractor will make his own arrangement of Generator set for truss work and other works for which electrcity be required such as welding , notching, cutting, grinding etc.

M/s S K ARORA

classic contriction co.

M/S GR construction compony