SPECIAL REPAIR TO SECURITY FENCING AND STEEL GATES FOR UNITS JCOS MESS UNDER GE (SOUTH) MAMUN

Amount

Dismantling of existing barbed wire fencing any description,shape etc complete all as specified and directed.

Dismantling of existing posts or struts any description (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed portion. Post embeded in natural ground complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in soft/ loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation etc or for shafts , wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out any type of soil complete all as specified and directed.

M & L for PCC 1:3:6 type C 2 (using 40mm graded stone aggregate ) in foundation filling and mass concrete including necessary formwork complete all as specified and directed.

M & L for PCC in foundation in 1:4:8 type D2 (using 40mm graded stone aggregate ) as in foundation filling and mass concrete complete all as specified and directed.

M&L for mild steel work using angle and flat iron section conforming to Fe 290 (Gde E-165) as in for special purpose such as posts and struts in fencing etc including cutting to shape as directed, drilling holes, including welding bolting or reveting and embedded in concrete complete all as specified and directed.

M&L for 5 to 10mm Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only chain link MS galvanised medium coated as per IS 4826 fencing 100mm X 100mm mesh & 4mm dia wire complete all as specified and directed. Make :- TATA /ARMSTRONG WIRES/ MAIMOM ROGER

Supply only 4.00 mm galvanised medium coated as per IS 4826 steel wire as required for fixing chain link fencing etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

S&F Galvanised (medium coated as per IS 4826) 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail staying bolts including securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pins etc as directed (each line of wire to be measured) all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new steel surfaces n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying black bituminous paint to steel surfaces complete all as specified and directed.

M&L RCC (1:1 ½ :3) type A-1 using 20mm graded stone aggregate as in footing ,base of pillar,plinth beam etc complete all as specified and directed.

M&L RCC (1:1 ½ :3) type A-1 using 20mm graded stone aggregate as in pillar or post etc complete all as specified and directed.

M&L for preparation of newly plastered surface on walls and applying two coat of cement base paint over and including a coat of primer as per manufacturer instruction complete all as specified and directed.

Form work to sides of footing , plinth beams , base of column etc for fair finished surfaces complete all as specified and directed.

Form work to sides of column etc for fair finished surfaces complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

All as per item No 21 above but for 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L for MS (Fe-290 or Fe -330) framed work as in doors or steel gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Retruning and filling spreading leveling watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated surplus soil n exc. 50 m and depositing where directed at a level n exc 1.50 m complete all as specified and directed.

M/S J N TRADERS