SPECIAL REPAIR TO OMQ BUILDING NO. P-58 AND SMQ BUILDING NO. P-2 ATAIR FORCE STATION UNDER GE (AF) TUGHLAKABAD

Amount

Sch 'A' Part-I (Earth Work and Demolition work)

Taking down chowkats or frame with shutter (PVC door and window/Ventilator) (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site all as specified and directed

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and removal from site

Demolition of concrete is reinforced (Reinforcement cut as required to faciliate demolition) of any descrition and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Demolition of cement concrete of any description & in any position not otherwise specially provided for etc complete all as specified & directed.

Demolition of cement concrete of any type description and in any position not otherwise specifically provided for complete all as specified.

Demolition of mud/brick coba in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof)

Removing excavated materialexc. 1.50 km but n exc. 5 km and depositing where directed by Engr in Charge

Taking down shutters of any description and refixing the same in same opening exceeding 1.00 sqm but not exceeding 2.00 sqm each

Dismantling of cast iron drain pipe of 100mm bore jointed in lead joints or cement joints and taking out of under floors if required

Dismantling of wrought iron or Mild Steel work of any description complete all as specified and directed by EIC

Dismantling boarding ,any description,any description,fixed in any position with nails etc complete all as specified & directed.

Sch 'A' Part-II (B/R Work)

M&L for ISI marked Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top) conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge, hoisted and fixed in position all as specified in SSR part-I for capacity 500 liters incl hoisting fixing at speciifed location including tank nipple, union and Lowering of unserviceable Water Storage Tank and including S&F of 20 mm bore ball brass valves (Float valve) high pressure with polythene float and fly nut of any description complete all as specified and directed. NOTE: - (i) The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. (ii) The Contractor shall submit purchase voucher and the same shall be defaced by the Engr-in-Charge before making payment. Non-submission may lead to non-payment

M&L for ISI marked Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top) conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge, hoisted and fixed in position all as specified in SSR part-I for capacity 1000 liters incl hoisting fixing at speciifed location including tank nipple, union and Lowering of unserviceable Water Storage Tank including S&F of 20 mm bore ball brass valves (Float valve) high pressure with polythene float and fly nut complete all as specified and directed. NOTE: - (i) The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. (ii) The Contractor shall submit purchase voucher and the same shall be defaced by the Engr-in-Charge before making payment. Non-submission may lead to non-payment

S&F for steel water tubing ISI Marked 15mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected complete incl taking down old GI pipe complete all as specified and as directed by Engineer-in-Charge.

S&F for steel water tubing ISI marked 20mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected complete including taking down old GI pipe all complete as specified and as directed by Engineer-in-Charge.

Labour only for Refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls, ceiling, floors etc including taking down old GI pipe complete all as specified. Notes:- (i) Quoted rate shall include cleaning of taken down pipes (ii) Rates quoted shall deemed to be included S & F new ISI marked fittings such as bend, unions, nipple etc. as required

Labour only for Refixing only old GI tubing 20 mm bore pipe and connections in new or old position as on walls, ceiling, floors etc including taking down old GI pipe complete all as specified. Notes:- (i) Quoted rate shall include cleaning of taken down pipes (ii) Rates quoted shall deemed to be included S & F new ISI marked fittings such as bend, unions, nipple etc. as required

S & F 20 mm bore Gun-metal, globe or gate valve with iron wheel head, screwed both ends for ironc pipe all as specified and as directed

S & F in repair 15 mm bore stop valve/angle cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe all as specified and as directed

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction. NOTE:- The purchase Voucher of materials shall be submitted for claiming payment. Non Submission may lead to non payment

S & F for 30 mm thick factory made solid panel both side prelaminated PVC door shutter with smooth finish confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded both side prelaminated PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide both side prelaminated PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross both side prelaminated PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick both side prelaminated PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed. NOTE:- The purchase Voucher of materials shall be submitted for claiming payment. Non Submission may lead to non payment

Providing and fixing ISI marked Powder coated aluminium butt hinges of size 100x75x4 mm anodised (minimum thickness of powder coating 50 micron) transparent or dyed to required colour or shade with necessary screws etc. complete all as specified and directed

Providing and fixing Powder coated aluminium handles of size 150 mm, ISI marked, anodised (minimum thickness of powder coating 50 micron) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed

Providing and fixing Powder coated aluminium tower bolts of size 150x10mm, ISI marked, (minimum thickness of powder coating 50 micron)) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed

Providing and fixing Powder coated aluminium work for frame/shutter/fixed portions of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per specified and directed. (Glazing, paneling to be paid for separately) : (Mim Thickness of Section shall not be less than 1.5 mm)(minimum thickness of powder coating 50 micron) NOTE:- The purchase Voucher of Alumnium Section shall be submitted for claiming payment. Non Submission may lead to non payment

Providing and fixing glazing with float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)

Providing and fixing pressed steel door frames of size 165x 60 mm conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including fixing with adjustable lugs with split end tail to each jamb as directed by Engineer-in-charge:

M&L PCC for 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating ,as directed coping, benching & for fixing railing, holdfast etc complete.

M&L for cement concrete 1:3:6 type C-1 (20mm graded stone aggregate) as in filling back side of pressed steel door frames, complete all as specified and as directed by Engineer-in-Charg

S&F 35 mm thick factory made, second class teak hard wood, plain framed, panelled shutter (two panel) with lock rail and 12 mm Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass,wire gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats.

Providing and fixing ISI marked oxidised M.S. tower bolt of size 200x10 mm black finish, (Barrel type) with necessary screws etc. (copper oxidized as per IS: 1378) complete all as specified and directed

Providing and fixing ISI marked oxidised M.S. sliding door bolts of size 300 x 16 mm with nuts and screws etc. (copper oxidized as per IS: 1378) complete all as specified and directed

Providing and fixing ISI marked IS : 1341 M.S. pressed butt hinges of size 125x65x2.12 mm bright finished with necessary screws or welding where required complete all as specified and directed.

Providing and fixing ISI marked oxidised M.S. handles of size 125 mm conforming to IS:4992 with necessary screws etc. (copper oxidized as per IS: 1378) complete all as specified and directed

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

S & F in repair stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood/alumium beading and fixed with tinned tacks to stainless steel screws etc complete all as specified & directed.

M&L 15mm thick rendering other then fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth (without using extra cement) including taking down and complete removal from site complete all as specified and directed by Engineer-in-Charge.

M & L 15 mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement with using water proofing compound including taking down and complete removal from site complete all as specified and directed by Engineer-in-Charge. (WPC will be measured and paid separately)

M&L 5 mm thick rendering on ceiling etc surfaces in CM 1:3, finished even and smooth (without using extra cement) including taking down and complete removal from site complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing New Plastered Surfaces including applying of TWO COATS of DISTEMPER OIL EMULSION (OIL BOUND WASHABLE DISTEMPER) over a Coat of primer, complete all as specified and as directed by Engineer-in-Charge.

M & L preparation of newly plastered surfaces and including applying two coats of cement base paint walls over and including a coat of primer complete all as specified and directed.

M&L fpr Preparing Newly Plastered Surfaces of ceiling and applying Three COATS of WHITE WASHING, complete all as specified and as directed. by Engineer-in-Charge.

M & L preparation of old plastered surfaces and including applying one coats of cement base paint walls over and including a coat of primer complete all as specified and directed.

M&L Preparation old decorated surfaces on ceiling and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying two coat of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from old decorated plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, including applying two coats oil emulsion distemper white or coloured over a coat of approved primer complete all as specified & directed by Engineer-in-Charge.

M&L Preparation of new painted wooden surfaces of any description not otherwise described, over 10 cm width or girth including applying two coat of synthetic enamel paint of approved brand (ISI Marked) over a coat of primer as per approved shade complete all as specified and directed by Engineer-in-Charge.

M & L preparation of new surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer etc complete all as specified and as directed.

M&L Preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

M&L Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes/ SWR pipes of 110 mm diameter conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including taking down of old pipe of any size and discription and removal from site complete all as specified and directed

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories Bend 87.5° for 110 mm Dia pipes for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed

M&L for cement concrete 1:3:6 type C-1 (20mm graded stone aggregate) 75 mm thick in plinth protection and courtyard, finished cement surfaces even and smooth with out using extra cement , including filling of hot bitumen in the groove complete all as specified and as directed by Engineer-in-Charge.

M&L PCC for 40 mm thick 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in filling of Sunken portion complete all as specified and directed.

M & L applying evenly a coat of blown type bitumen at the rate of 1.50 kg/sqm and binding with clean dry sand @ 0.05 cum per sqm etc complete all as specified & directed.

M & L for rendering 15 mm thick in CM 1:3 with using water proofing compound (WPC shall be measured and paid separately) all as specified

Supply only integral water proofing compound of approved quality

M & L PCC 1:7:12 type F2 as in sub base of floor mass filling using 40 mm graded aggregate with using water proofing compound etc complete all as specified

Material and labour for First quality Non-skid Ceramic coloured tiles jointless, 7-8 mm thick (area of each tile exceeding 0.09 Sqm but not exceeding 0.16 Sqm) laid in floors with neat cement slurry @ 3Kg/Sqm over and including 15mm thick screed bed of cement mortar (1:6) and including pointing in white cement with pigment to match the shade of tilescomplete all as specified and directed.

S&F for steel water tubing ISI marked 32 mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected all complete as specified and as directed by Engineer-in-Charge.

S & F 100 mm dia Sand cast iron S&S pipe as per IS: 1729 soil waste and vent pipes , ISI marked in any length with or without laid in trenches or in floor with cement joints etc complete all as specified.

S & F 100 mm dia Sand cast iron S&S pipe as per IS: 1729 soil waste and vent pipes , ISI marked in any length with or without fixed with walls etc complete all as specified.

S & F cast iron floor trap with graating of 100 mm size including jointing to waste pipe with cement joints etc complete as directed

S&F for 100 mm bore Bends (any radius) with oval access door diminishing pieces or tapers (larger bore measured) of Sand cast iron S&S as per IS - 1729 complete all as specified and as directed.

Providing and fixing in repair White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete all as specified and as directed by Engineer-in-Charge.

Supply and fixed in repair 15 mm dia bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.

S & F 32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm etc complete all as specified.

S & F in repair 15 mm chromium plated cast copper alloy bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915 mm X 460 mm & bowl size 410 mm X 330 mm X 160 mm complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S&F in repairs wash down water closet EWC floor mounting incl all necessary accessories etc complete all as specified and as directed.

S&F CP Health faucet (SS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and SS wall hook including making connections and fixed in position complete in all respect as specified and directed by Engr-in-Charge.

S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle etc complete all as specified & directed.

S & F in repair of CP swivel shower fancy type for fixing with 15mm pipe etc complete all as specified & directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar incl. all quoins arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for Brick work with sub-Class ‘B’ bricks (with old size bricks), straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6, complete all as specified and as directed.

M & L plain Cement concrete type 1:3:6 C-2 (40 mm aggregates) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L glossy chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with white cement and pigments in any colour machine preassed glazed , over cement screed bed 20 mm thick cement motor 1:4 all as specified and as directed by Engr-in-charge.make nitco/arena or equivalent all as specified and directed by Engr-in-Charge. Note: - The contractor shall submit sample as per make listed in Appx 'B' of PS or any ISI marked subjcet to independent testing testing report by GE. The contractor shall submit purchase voucher of tiles for claiming payment.

Dismantling floor,hearth or wall tiling including cement motrar bedding cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises.

S&F vitrified tiles 10mm thick (Square/rectangular) polished in dark shade, area exc 0.42 Sqm but n exc 1.00 Sqm in floors (600mm x 1200mm)etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6.

Providing and laying Vitrified tile polished finish in floor in Size of Tile 600 x 600 mm (thickness to be specified by the manufacturer(avg thickness not less than 10 mm) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, including laid on 15 mm thick cement mortar 1:6 (1 cement: 6 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc complete all as specified and directed. NOTE: - (i) The tiles must be cut with the zero chipping diamond cutter only . (ii) Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (iii) The contractor shall submit Purchase Voucher

M&L for glazed ceramic coloured designer concept tiles matching with existing tile 350x250x7 or 450x350x7mm size as in walls set and jointed in neat cement slurry over and including 10mm thick in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc all as specified and as directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting any gauge,thickness,incl Nainital or similar pattern roof covering etc complete all as specified.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw including rubber washer complete all as specified and directed by Engr-in-Charge.

S & F joist, channel, angle, or tee sections,hollow tube fixed independently, with connecting plates, etc (cut to ordinary lengths i.e. with in 20 mm of the length indicated to FE 410-W (Gde-E-250 quality-B) complete all as specified and directed.

M&L for gunniting to RCC works in column beams, slabs, chajja, facia, landing, balconies etc by dismantling of RCC (loose concrete) and chipping of unsound/weak concrete material with manual Chisel and/ or by standard power driven percussion type and cutting of steel bar including cleaning the exposed concrete surface and reinforcement with wire brushes etc , after that cleaning the steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry and placing steel bars at location where the balance steel dia is less than half including fixing the steel bars in position using epoxy resin anchor grout of approved make and painting with ant rust coating on exposed steel. The surface then be fixed by welded with hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed (dia of wire shall not be less than 4mm) & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement. The surface then be treated with epoxy bonding adhesive having coverage 2.20sqm/kg of approved make and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and providing, mixing and applying 25mm thick gunniting of SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications complete all as specified and directed by Engineer-in-Charge. Note:- (i) The quoted rate shall be inclusive of all the works. (ii) Work to be carried out as in patches as directed by Engr-in-charge (iii) Rate for scaffolding upto fifth storey shall be included in quoted rate. (iv) All demolished material removed from MOD land completely distance exe 5 km. (v) The prepared area shall be neatly cleaned (vi) The rate of TMT shall not be included in the quoted rate.

M&L TMT steel bars of any dia cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specifieds

M&L for Re-baring by drilling holes and fixing nozzle if required in existing concrete/brick work as in column, beams, slabs and foundation etc in any position and any description size of hole 14mm, 16mm & 22mm suitable for dowels of size 10mm, 12mm & 16mm respectively (minimum depth 140mm for 10mm & 12 mm dia bars and 180mm for 16mm dia bar, cleaning the surface properly with blow out pump & round brushes and fixing of dowel bars with epoxy resin (resin+hardner). Make: Sika, Fosroc or concressive 1450 of BASF complete all as specified and directed by Engr-in-charge. Note:- (i) Adequate lap length shall be provided as per IS-456-2000.(ii) Reinforced TMT bars where incorporated in work will be paid under item no 4&5.(iii) The work shall be carried out upto four storied building with scaffolding.

M&L for providing and applying corrosion resistance non-shrink free flow, cementitious one component Micro-concrete with average thickness 75mm having compressive strength (BS 4551-80-60) 50 MPA at 28 days, Tensile strength (ASTM C 348)-2.0 N/mm2 @ 28 days, Flexural strength (ASTM C 348)-9 epoxy bonding agent TM bond EP thermax having mix density of 1.45 to 1.5 kg/ltr, compressive strength (BS-6319 PT 3)-25 Mpa at 7 days bond strength (ASTM C 881)- 11 N/mm2 at 7 days, having an over lay time of 3 hrs at 30°C pouring of micro concrete into the formwork using suitable arrangement or if required using pumping device for and the bottom shuttering after 7 days ensuring proper bond between the micro concrete and existing concrete substrate etc including all tools and tackles as per accepting office, complete all as specified and directed by Engineer-in-Charge. Make : BS-66 Musi'c of Thermax/Webac Chemicals/Chemco System or as approved by Accepting Officer.

Providing and fixing stainless steel ( Grade 304) railing/stairs (framed) including stringers, treades, landing, balusters made of Hollow tubes, channels, plates, square/circular rods etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and including fitting accessories the same with necessary stainless steel nuts and bolts complete all as specified and directed, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of GE, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). NOTE:- The Contractor shall submit Purchase Voucher and the same shall be defaced by the Engr-in-Charge and fwd along with bill for claiming payment. Non-Submission may lead to non-Payment.

S&F in repair stainless steel kitchen rack plate rack over all size 24" x30" complete all as specified and as directed.

Providing and laying gang saw cut granite stone of18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. including mirror polishing and bull nosing edging in any position etc all as directed by Engr-in-Charge.

M&L for Rounding to the edge of stone slabs on edge such as cooking platform complete all as specified and directed

S & F Brass 4 lever locks, cupboard, grade I, size 50 mm

S&F Magnetic catcher for Wardrobe, Cub-boards Etc.

Supply and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

Supply and fixing 6mm thick pvc ply with suitable fully threaded steel screws etc on the backing of rack, drawer, cupboard, kitchen cabinet under kitchen counter etc all complete as per direction of Engineer-in-charge.

Supply and fixing 12 mm thick PVC ply with suitable fully threaded steel screws etc in partitions, boxes, shelves, racks and cupboard, kitchen cabinet, racks almirah partition under kitchen counter etc all complete as per direction of Engineer-in- charge.

Supply and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of brand Green Ply/Century Ply or Duro including fixing 2 mm thick PVC edge banding tape with hot glue by edge banding machine etc with neccesary auto closing spring loaded hinges (hydraulic type) etc complete as per direction of Engineer-in- charge.

M&L for Cleaning of roof slab/chajja with sweeping with brooms, removing complete all as specified and directed by Engr-in-Charge.

M/L for Providing cement concrete 1:3:6 Type C0 using 12.5 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified..

M&L for preparing new surfaces and applying two coat of Polyurethene (PU) based Water proofing liquid compound as per manufacturer's instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge. NOTE:- The Engr-incharge shall make the quantity chart which will be used at site and shall submit along with final bill. The contractor shall submit Purchase voucher for the same. The work shall be carried out by authorised applicator, the same shall got approved by accepting officer before carrying out the work at site

M&L for Brushing neat cement slurry with 3kg of cement per Sqm complete all as specified.

M & L for Avg 25mm-75 mm thick cement concrete 1:2:4 type B-O m (12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and smooth without using extra cement complete all as specified.

M/L 10mm thick plastering in cm 1:3 on green concrete roof surfaces with water proofing compound as per manufacture instructions, surface finished even and smooth without using extra cement complete all as specified.. Note :- WPC shall be measured and paid separately.

Supply only water proofing liquid compound complete all as specified and directed by Engr-in-Charge.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane,black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The joints and over lap shall be carried out as per manufature instructions. NOTE: - (i) The vital physical and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. (b) Tear strength in longitudinal and transverse direction as 300/ 250N. (c) Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. (ii) The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. The authorised applicator shall got approved by the Accepting Officer. (iii) The water testing report of roof on which the APP work are carried out shall got signed by concerened JE, AGE, GE and authorised applicator. The same shall be fwd to office of Accepting Officer for record. Non-submission may lead to non-payment. (iv) The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment.

M&L Appling one coat Bitumen water proofing aluminium heat resistance paint over APP membrane as per manufacture instructions complete all as specified and directed by Engr-in-Charge.

Schedule of Credit

akenterprises

M/S S.K.Electricals

Green Leaves