WELCOME MAINTENANCE AND OTHER CONNECTED B/R AND E/M WKS FOR OFFRS MD ACCN AT VIKRAM VIHAR UNDER AGE B/R-I AND AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

M&L for rendering 15 mm thick with ready mix plaster on stone masonary surface/ other than fair faces surfaces finished even and smooth without using extra cement including taking down existing cement plaster complete all as specified & as directed. Note: Rate for scaffolding arrangement to carry out the work upto 4 storey building deemed to be included in the quoted rate.

M&L for rendering 5 mm thick with ready mix plaster on stone masonary surface/ other than fair faces surfaces finished even and smooth without using extra cement including taking down existing cement plaster complete all as specified & as directed. Note: Rate for scaffolding arrangement to carry out the work upto 4 storey building deemed to be included in the quoted rate.

M&L for preparation of newly plastered surfaces of wall/ceiling sufraces and applying 1mm thick (average thickness) waterproof cement based putty and thereafter apply two coats of oil bound distemper on wall/ceiling surfaces over a coat of primer and using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed.

M&L for complete removal of existing treatment under (OBD/Oil paint/ white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than 1500, sending pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour complete all as specified and as directed.

M&L for cement based putty of average thickness 1-2 mm over the plastered/Old painted wall /ceiling surcafes to make the surface free from dust etc, by skilled labor as per following steps :- Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with wall mixture with the mixing capacity of minimum 2.5 kg putty per minute Step 2 :- Applying the first coat of prepared mixture with the help of fully automatic airless spray machine of putty application having flow speed of maximum 6 liters per minute with a maximum pressure of 3300 PSI. Step 3 :- Allow 6-8 Hrs time to dry the putty surface.

M&L for applying two coats of oil bound distemper on wall/ceiling surfaces over and including one coat of primer using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 m the spray machine should be of reputed manufacturer with Pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x125 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x100 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.

S & F factory made both side prelaminetd wire mesh solid PVC door shutter 35 mm thick consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15mm x 15mm for top, lock & bottom rails. M.S. frame shall have a coat of metal primer of approved make and manufacturer. 19mm x 19mm M.S. square tubes shall be covered with heat moulded Prelam sheet 'C' channel made from 5mm (±0.25) thick PVC Sheet of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, of size 35mm thickness, 115mm width out of which 100mm shall be flat and 15mm shall be bent in 90° angle on either side forming stiles,one of the 90° bend edge is cut from stiles as well as rails to nail from inner side of door to hide wire mesh fixing steel screws. 5mm (±0.25) thick 140mm wide PVC sheet out of which 125mm shall be flat and 15mm shall be bent in 90° on the inner side to form top and bottom rail and 155 mm wide PVC sheet out of which 100 mm shall be flat and 15mm shall be bent in 90° on both side to form lock rail. An additional 5mm (±0.25) thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive. Panel will be of GI /SS wire mesh of 24 gauge to be fitted inside area of stiles & rails. The wire mesh in top, bottom & lock rail is sealed with awings. 15mm x15mm tube with steel screw of size 13/6 mm.10mm (5mm x 2nos) thick PVC strip of 25mm width is to be stuck & nails on both side of G.I. wire mesh interior at the top, bottom & lock rail. 10mm thick (5mm x 2nos) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail Door to be fixed to frame with 3 nos. MS powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardware’s should be fixed with 19*6mm size steel screws etc. complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. Note : Stainless steel butt hinges, tower bolt and handles, S.S screws included) complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 45 x 70 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. .

S & F 18 mm thick wood plastic composites (WPC) board for shutters, 100% solid with density not less than 650 Kg per cubic meter, one side wood grain finished laminated for exposed/external surface, fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and as directed. Note : (a) Pattern & design of WPC board to be approved by GE. (b) Locking arrangement shall be provided in rooms cupboard shutters. The rate quoted by the tenderer shall be included for the same.

M&L for 18 mm thick wood plastic composites (WPC) board for partitions, 100% solid with density not less than 650 Kg per cubic meter, both side white finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and directed. Note :(a) Pattern & design of WPC board to be approved by GE. (b) Locking arrangement shall be provided in rooms cupboard shutters. The rate quoted by the tenderer shall be included for the same.

S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters and cupboards complete all as per specified and as directed.

S&F of stainless steel handles 100 mm size for kitchen cabinet shutters and cupboards complete all as per specified and as directed.

S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws complete all as per specified and as directed.

S&F SS tower bolt size 125 mm complete all as per specified and as directed.

S&F 100 mm long, stainless steel of AISI 304 grade, hasp and staple, safety type, including bolt to hinge plate and fixed with screws etc. complete all as specified and as directed.

S&F 25 mm dia SS curtain rods (minimum wall thickness 1.6 mm) fancy type, including SS bracket and SS side bulb decorative type complete for doors and windows as required complete all as specified and as directed.

M&L for preparation of old decorated surfaces of Wall (plastered or unplastered) including cornices pillasters and other wall features by Vacuum based sanding machine complete all as specified smoke, soot moulds and efflorescent salt and trading oil or greasy spots applying one coat of white wash to obtain uniform surfaces including scafolding arrangement, trestles, ladders etc. complete all as specified and as directed.

M&L for preparation of old decorated surfaces of Ceiling (plastered or unplastered) including cornices pillasters and other wall features by Vacuum based sanding machine complete all as specified smoke, soot moulds and efflorescent salt and trading oil or greasy spots applying one coat of white wash to obtain uniform surfaces including scafolding arrangement, trestles, ladders etc. complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparing of old decorated surfaces plastered or unplastered including cornices pillasters and other wall features by washing, rubbing down and stopping of distempered and painted surfaces of Walls/Ceiling and applying one coat of oil emulsion distemper white or tinted in patches of area exceeding 0.5 Sqm but not exceeding 2.50 Sqm each to match the existing surface including scaffolding arrangement, trestles, ladders etc. complete all as specified and as directed. .

Taking down chowkhats or frames with shutter exc 1.5 sqm but not exc 4 sqm each but without taking off shutters from the frame complete all as per specified and as directed. .

M&L for powdar coated aluminium anodised (powder coating not less than 50 micron) three way track sliding windows with standard opening of window ACs of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) including provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5 mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

Taking down chowkhats or frames with shutter not exceeding 1.5 sqm each but without taking off shutters from the frame complete all as per specified and as directed. .

Taking down shutter of any description exceeding 1 sqm but not exceeding 2.0 sqm Each complete all as per specified and as directed.

S&F in repairs brass chromium plated bib tap long body of 15 mm bore fancy type fixed to iron pipe complete all as specified and as directed.

S&F in repairs 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complete all as specified and as directed.

S&F in repairs chromium plated brass stop cock fancy type (concealed type)screwed both ends high pressure for 15mm bore size iron pipe or ferrule complete all as specified and as directed.

S&F in repairs chromium plated brass angle valve fancy type suitable for 15mm bore pipe complete all as specified and as directed.

S&F in repair chromium plated brass shower rose swival type 50mm with arm fancy type suitable for 15mm bore pipe complete all as specified and as directed.

S&F in repairs PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15 mm bore of pipe with washer complete all as specified and as directed.

S&F in repairs waste fitting (coupling) brass chromium plated 32 mm dia for WHB complete all as specified and as directed.

S&F in repair 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc. complete all as specified and as directed.

S&F in repair 15 mm bore wash hand basin CP brass mixer complete all as specified and as directed.

S&F in repairs 32/40mm bore and 75cm long PVC waste pipe suitable for WHB/Sink complete all as specified and as directed.

S&F in repair chromium plated ABS body health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe complete all as specified and as directed.

S&F in repair soap dish chromium plated brass fixed with brass nuts and screws as in repair complete all as specified and as directed.

S & F in repair toilet paper holder brass chromium plated complete all as specified and as directed.

S&F in repair plastic seat cover for water closet (EWC) white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and as directed.

S&F in repair viterous china wash down water closet pan (EWC) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed.

S&F vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with intergral footrest with 'P' or 'S' trap complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and as directed.

S&F in repair telescopic channel 18" long heavy type fixed in cupboards complete all as specified and as directed.

S&F in repairs 5.5 mm thick counter wash basin mirror size 0.75 mtr x 0.60 mtr bevelled type edges free with 6 mm thick backing of commercial ply wood with x 04 Nos CP bracket complete all as specified and as directed.

S&Fstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4 mm fixed with tinned tacks or GI staples complete all as specified and as directed.

M&L for comprehensive maint of ceiling, exhaust fan of Md accn including proper checking of base connection, lock pin of U clamp fan blade, serviceability of down rod, complete with greasing/lubrication and cleaning of fan bearing all as specified and directed.

M&L for opening of hole through out the wall as suitable for exhaust fan of size up to 450mm sweep and fixing of nut-bolts with 4" anchor fastner of suitable size and making food the disturbed surface and all as per site requirement complete all as specified and as directed. Note : The rates are inclusive in respect of under this item as above hole opening civil work with MS faster bolt of 8mm dia and 100 mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan.

Supply and fixing in repair BLDC fan controller PCB with short cuircuit protection power 440V suitable for onground BLDC ceiling fan 1200 mm Sweep complete all as specified and as directed.

M&L for rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaningand winding with supper enameled copper wire of superior quality of same gauge, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan complete all as specified and as directed.

Supply and fixing in repair ceiling fan Ball bearing of suitable size & model as per existing complete all as specified and as directed.

Supply and fixing in repair blade (set of 3 blades) of Ceiling fans 1200/1400mm sweep heavy duty as per existing complete all as specified and as directed.

Supply and fixing in repair Down rod of 1.5 feet height fabricated out of MS pipe 12mm dia heavy duty, duly painted with one coat of white synthetic enamel paint complete all as specified and as directed.

Supply and fixing in repair Canopy for Ceiling fans of 1200/1400mm swipe heavy duty complete all as specified and as directed.

Supply and fixing in repair Exhaust fan MS Louvers upto 450 mm Size, as per sample up to fourth floor complete all as specified and as directed. Note:-Staircase arrangement for fixing of louvers up to third floor shall be arranged by the contractor without any extra cost.

Supply and fixing in repair ceiling fan capacitor of 2.5 mfd complete all as specified and as directed.

Supply and fixing in repair ceiling fan capacitor of 3.5 mfd complete all as specified and as directed.

Supply and fixing in repair fan regulator electronic, stepped type/switch type, suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed.

S&F in repair heating element of 1.5 KW including rubber washers (ISI marked) etc as per site requirement complete all as specified and as directed.

S&F in repair thermostat 9/11" (ISI Marked) for 25/35/50 Litres capacity Geyser as per sample complete all as specified and as directed.

S&F in repair 25 Ltr inner stainless tank suitable for 25 Ltr storage water heater as per sample complete all as specified and as directed

S & F in repair geyser base plate assembly set complete with inlet, outlet and thermostat including rubber gasket for geyser of 25 litres capacity as per sample complete all as specified and as directed.

S & F in repair of PVC connection with brass nipple 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25/50 ltrs capacity of geyser connection with 2 Nos brass/CP nuts as per sample complete all as specified and as directed.

Supply and fix in repair of non-return valves 15mm dia made up of brass as per sample complete all as specified and as directed.

Supply and fix in repair of safety plug and nut for high pressure release As per sample complete all as specified and as directed.

Supply and fix in repair of indicator lamp (Red & Green) 230 volts suitable for Geyser as per sample complete all as specified and as directed.

Supply and fix in repair of PRCD 16 Amp, 30 mA plug Top, complete all as specified and as directed.

Supply and fix in repair of 15 Amp plug Top, complete all as specified and as directed.

Supply and fix in repair of MS fastner bolt 8 mm dia and upto 150 mm long for fixing Geyser/Exhaust Fan with nuts and washers Each Set 2 Bolt complete all as specified and as directed.

Supply and fix in repair of PVC insulated FRLS single core with stranded copper cable of size 1.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.

Supply and fix in repair of PVC insulated FRLS single core with stranded copper cable of size 2.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.

Supply and fix in repair of PVC insulated FRLS 3 core with stranded copper cable of size 2.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.

Supply and fix in repair of PVC insulated FRLS 2 core with stranded copper cable of size 1.5 Sqmm for any type of wiring as per site requirementcomplete all as specified and as directed.

Supply and fix in repair of MCCB 160 Amps 4 pole 415 volts fixed type with breaking capacity 25 KA 415 Volts, including necessary incoming and out going electric connection with suitable size of copper lugs etc.complete all as specified and as directed.

Supply and fix in repair of MCCB TPN 4 pole 63 Amp 415 Volt, 'C' Series 10 KA 'C' as per site requirement complete all as specified and as directed.

Supply and fix in repair of MCB SPN 40 to 63 Amp 240 Volt, 10 KA 'C' all as per site requirement complete all as specified and as directed.

Supply and fix in repair of MCB SPN 32 Amp 240 Volt, 10 KA 'C' all as per site requirement complete all as specified and as directed.

Supply and fix in repair of MCB SP 6 to 32 Amp 240 Volts, 10 KA, 'C' curve all as per site requirement complete all as specified and as directed.

S&F in repairs of sheet metal enclosures for DBs when MCBs to be used SPN-16 Way, 240V with busbar as per site requirement complete all as specified and as directed.

S&F in replacement single pole and neutral metal clad sheet metal enclosures with 2 pin and earth plug and socket complete with one no MCB SP upto 20 Amps as per site requirment complete all as specified and as directed.

S&F in replacement single pole and neutral metal clad sheet metal enclosures with 2 pin and earth plug and socket complete with one no MCB SPN upto 32 Amps as per site requirment of existing type for AC's/Geyser complete all as specified and as directed.

Supply and fix in repair of LED building security light 45 Watts from existing bracket complete all as specified and as directed.

Supply and fix in repair of GI pipe's bracket suitable for fixing of bldg security LED light fitting of 45 Watts including grouting and fixing the same on wall for installation of light fitting with necessary clamps, nut, bolts & washer and painting by synthetic enameled good quality paint in white/grey colour over one coat of red oxide primer until unless smoothness of bracketcomplete all as specified and as directed. Note :- GI pipe should be 25 mm bore with medium grade and the same to be moulded in 45 degree angle at the 1 m height to fix the building security light fitting.

Taking down of old ceiling fan/ exhaust fan/wall mount fan dismantling of blades,and depositing to MES store yard complete all as specified and as directed.

S&F in repair (metal) body suitable for 230/300 mm Exhaust Fan complete all as specified and as directed.

S&F repair single phase motor suitable for 230/300 mm Exhaust Fan complete all as specified and as directed.

S&F in repair blade (set of 3) suitable for 230/300 mm Exhaust Fan complete all as specified and as directed.

S&F in repair PVC body suitable for 230/300 mm Exhaust Fan complete all as specified and as directed.

S&F in repair PVC single phase motor suitable for 230/300 mm Exhaust Fan complete all as specified and as directed.

S&F in repair PVC blade ( set of 3) suitable for 230/300 mm Exhaust Fan complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or pwer) complete including fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets etc making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable including suitable dia concealed PVC/MS conduit and replacment of unsv pressed steel terminal boxes 2mm thick of required size and factory painted with stove enameled black paint with top cover 3mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one switch 5 Amps one way using cable (1.5 Sqmm for phase and neutral and 1.5 Sqmm for earthing) complete all as specified and as directed. Note:- The rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 adn same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash completed.

All as per item No.98.00 here-in-before but one 3 pin socket outlet, 5/6 Amps, independent, with cable 1.5 Sqmm including suitable dia concealed PVC/MS conduit complete all as specified and as directed.

All as per item No.98.00 here-in-before but 5 Amp socket outlet on same board complete all as specified and as directed.

All as per item No.98.00 here-in-before but for one socket outlet 15 Amps on independent board with cable 2.5 Sqmm size for phase and neutral and 2.5 Sqmm for earthing with through existing PVC/MS conduit complete all as specified and as directed.

All as per item No.98.00 here-in-before but but here-in-before for one light controlled by 2 Way switch using cable 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing with through existing PVC/MS conduit complete all as specified and as directed.

S&F switch piano flush type 5/6 Amps SP one waycomplete all as specified and as directed.

S&F switch piano flush type 5/6 Amps SP two way complete all as specified and as directed.

S&F bell push, flush type 5/6 Ampscomplete all as specified and as directed.

S&F socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and as directed.

S&F switch piano flush type 15/16 Amps SP one way complete all as specified and as directed.

S&F universal socket outlet 2-in1 (multipurpose) 5 pin 6/16 Amps flush mounted type complete all as specified and as directed.

S&F 0-4 step type electronic regulator for ceiling fan 1200/1400 sweep, 240 V complete all as specified and as directed.

S&F in repair electric bell ding dong any type complete all as specified and as directed.

S&F ceiling rose surface bakelite 65x25 mm two to three terminals complete all as specified and as directed.

S&F in replacement of lamp holder bakelite insulated body with back plate suitable for batten fitting complete all as specified and as directed.

S&F in repair wall mounted LED integrated batten T-5 20 Watt - 4ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type complete all as specified and as directed.

S&F in repair wall mounted LED integrated batten T-5 10 Watt - 2ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type complete all as specified and as directed.

S&F in repair decorative wall light mounting suitable for LED lamp upto 15 Watt complete all as specified and as directed.

S&F in repair,surface mounting round/square shape LED down lighter 12 Watt any type complete with including new flexible wire as requried on site in replacement of old unsv existing ceiling light fitting complete all as specified and as directed.

S&F in repair LED 10 Watt white bulk head engineering plastic housing with clear prismatic including required LED bulb and all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete all as specified and as directed.

S&F in repair LED bulb 12 Watt Rechargeable type B-22 Cap, AC 230V, 50 Hz suitable for Batten Holder/Bulk head/SK light fittings in replacement of old unsv lights any type complete all as specified and as directed.

S&F in repair of sub main wiring using PVC FRLS grade insulated unsheathed, multisrand copper conductor cable 2 runs of 10 Sqmm for Phase and neutral and 1 run of 10 Sqmm for earth wire drawn through existing PVC/MS conduit and including replacement of unsv pressed steel terminal boxes of in wall as per suitable/existing dia with fittings like tees, bends junction/terminal boxes etc as per site requirement and complete all as specified and as directed. Notes : (a) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour. (b) Two runs of main cable and one run of earth cable all together shall be considered as one length.(c) New conduit of suitable size with connected fitting will be laid if there is a damage/blockage in existing conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

M/S Davinder Kumar (BID ID -3378745)

P R Constructions (BID ID -3386468)

M/S Parmod Johar (BID ID -3378685)