98/EWC(B)/2023-24

Amount

Loading, unloading and safe carriage of the following materials from any Electy. Store Center of Electricity store division of Bareilly zone.

33 KV 3X300mm2 XLPE Cable

33 KV 3X300mm2 XLPE Cable jointing kit O/D

33 KV 3X300mm2 XLPE Cable jointing kit S/through

ST pole 11 Mtr. Long

9.0 M long PCC pole

33 KV cross arm

33 KV pin insulator

33 KV pin with nut

M.S. Earthing rod

M.S angle 65x65x6mm, 2700mm

Top channel 125x65x6mm 3200mm

T- Off Channel 125x65x1300mm

ACSR Dog conductor

11 KV disc insulator B&S type 70 KN

Disc fitting Dog/Racoon 70 KN

Complete Stay set complete

Gaurding angle 65x65x2950

G.I wire 8 Swg

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All types of clamps nuts & bolts,stone pad, washer would be provided by contractor.

Single line support on PCC Pole 09 Metre

Single line support on ST Pole 11 Metre

Cable exposer double pole on 11m long ST pole

End Type double pole structure on ST Pole 11 Metre

Section double pole structure on ST Pole 11 Metre

Four Pole Structure with ST Pole 11m

Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Erection/fixing for stay set with stay wire and clamp as per RESSPO drawing including binding, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete etc would be provided by contractor.

Laying and sagging of 3 phase ACSR Dog conductor in 33KV existing line including jumpering, hoisting, fixing of all type of insulators,armor rod, ferrule, binding, jointing and its clamping etc. in all respect.

Safe dismentling of old & rotten ACSR Dog, Weasel conductor of existing 33 KV line without damage of any insulator, clamp etc.

Dismantaling of old damage 33kv cross arm (6 No.) and 33kv insulators (66 No.) and erection of new 33kv cross arm (6 No.) and 33kv insulators (66 No.) in place of damage 33kv cross arm and 33kv insulators.

Fabrication and fixing of guarding angle on Single/double poles, Stringing and sagging of three nos. Earth/GI wire with cardle guarding of above 33 KV line as per RESSPO Norms including provision of all necessary clamps and hooks. Shifting of existing line conductor of 11 KV/LT line to maintain proper clearance in between both lines (all required material will be provided by the contractor except guarding angle and earth/GI wire).

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete the job.

Single line support on ST Pole 11 Metre

Cable exposer double pole on 11m long ST pole

End Type double pole structure on ST Pole 11 Metre

Section double pole structure on ST Pole 11 Metre

Four Pole Structure with ST Pole 11m

Fixing of danger board and number plate on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items.

Write serial number on each pole in English with black paint in yellow paint background. (All material would be provided be firm.)

Cable laying by drill method single circuit in HDPE Pipe.

Cable laying by drill method single circuit.

Laying of single circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M long including its jumpering complete with clamps, nuts and bolts.

Fixing of 33 KV O/D or I/D Cable Jointing Kit

Fixing of 33 KV S/Th Cable Jointing Kit

Fixing of cable route marker.

Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of Incharge.

Loading. unloading and safe carrige of old & rotten Dog, Weasel conductor from site to Store centre, Badaun.

M/S TIWARI TRADING COMPANY

M/S HINA ELECTRICALS

M A ELECTRICALS

SHIV TRADERS

M/s S.S. Refregeration