GE861 EWS-65/2023-24

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L Cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass filling and mass concrete complete all as specified and directed.

M&L for Walling of random rubble masonry uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and directed.

M&L RCC M25 Design mix (using 20mm graded crushed stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases beams; under-reamed piles slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC M25 Design mix (using 20mm graded crushed stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m , lintel bend complete all as specified and directed.

M&L RCC M25 Design mix (using 20 mm graded crushed stone aggregate) as Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC M25 Design mix (using 20 mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs landings balconies, canopies, deck slabs ad in shelves and the like complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 20 mm thick (horizontal or sloping) complete all as specified and directed.

Form work to sides and soffits of floor or roof beam, beam, haunchings, girders, bressumemers, lintels, cantilevers, shelves incl supports overhangs etc also splays between floors and beams complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffits of foundation and plinth beam and similar wk vertical or to batter complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, column and stanchions complete all as specified and directed.

S&F MS TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified and directed.

S&F MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clips Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified and directed.

Precast cement concrete hollow block masonry type 1:3:6 using (16mm graded crushed stone aggregate) exc. 10 cm in width and setting in CM 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick on brick or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L including preparation of newly plastered wall surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint camouflage pattern over a coat of primer complete all as specified and directed.

S&F Roof trusses Fe 410-W(Gde-E- 250) quality-A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, or flat sec) incl distance pieces cleats etc complete all as specified and directed.

M&L steel work in tubular pole incl special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified as directed

M&L for preparation of new steel and iron surface exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome primer complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coated GI based corrugated steel sheets 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S& F Pre-painted galvalume aluminium zinc coated GI based plain steel sheets 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding (eaves board) to wall fixed with self tapping screws complete all as specified and directed.

M&L 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed.

M&L second class soft wood timber plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or bands, sectional area exc 13 & n exc 25 sq cm complete all as specified and directed.

M&L 2nd class softwood plain fillets bull nosed splayed chamfered or rounded on one edge or face in section of sectional area exc 3 Sqcm but n exc 6 Sqcm complete all as specified and directed.

M&L 2nd class softwood plain fillets bull nosed splayed chamfered or rounded on one edge or face in section of sectional area not exc 3 Sqcm, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and directed.

S&F 2nd class soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 35 mm thick 2nd Class soft wood plain, framed, panelled shutters (any number of panel), with panel of timber flat on both side (Feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers fitted with chowkhats complete all as specified and directed.

35mm thick, 2nd class softwood glazed and skeleton shutters, open rebated and prepared to receive glass or gauge, etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkhats, complete all as specified and directed.

S&F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of window/ventilator shutter etc are provide with style and rails as specified in SSR Part I, Section 8, clause 8.24 (b);fitted to chowkhat, complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples, complete all as specified and directed.

S&F sheet glass of 3.0mm thickness ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.

M&L providing precast cement concrete louvers and Jallies, 35 mm thick 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) set in CM 1:4 (measured solid) including all moulding and frame etc. complete all as specified and directed.

M&L for Hardcore of broken stone or boulder of gauge n exc 63 mm deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L PCC 1:3:6 type C-2, 75 mm thick using 40 mm graded aggregate as sub base complete all as specified and directed.

M&L 25mm thick cement concrete type B-0,1:2:4 (using 12.5mm graded crushed stone aggregate) finished even and smooth without using extra cement complete all as specified and directed.

S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer CM 1:4 for laying floor finishes, complete all as specified and directed.

S&F Glazed ceramic tiles (coloured tiles) in vertical surfaces 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work complete all as specified and directed.

S&F Vitrified tiles 10 mm thick, light shade (square/rectangular) polished, area of each tiles n exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L 75mm thick 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) PCC in plinth protection, finishing cement concrete even and smooth without using extra cement complete all as specified and directed.

S&F MS Butt Hinges medium weight, cold rolled 100 mm size complete all as specified and directed.

S&F MS Butt Hinges medium weight, cold rolled 75 mm size complete all as specified and directed.

S&F Aluminium barrel tower bolt 150 mm size complete all as specified and directed.

S&F Aluminium barrel tower bolt 125 mm size complete all as specified and directed.

S&F Aluminium 150 mm long handles cast type anodised complete all as specified and directed.

S&F Aluminium 125 mm long handles cast type anodised complete all as specified and directed.

S& F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F vitreous china squatting pan, ORISSA pattern size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F PVC low level flushing cistern (white 10 Ltr capacity with internal fitting push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F medium grade GI tubes with all fitting and fixed complete to wall and ceiling or laid in floor 15 mm bore complete all as specified and directed.

S&F medium grade GI tubes with all fitting and fixed complete to wall and ceiling or laid in floor 20 mm bore complete all as specified and directed.

S&F vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F 15 mm bore fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F 15 mm bore, bib taps cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed. complete all as specified and directed.

S&F 15 mm dia stop cock cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union but fancy type chromium plated complete all as specified and directed.

S&F grating square 150mm size of PTMT (Minimum weight 100 gms) complete all as specified and directed.

S&F 150X100mm size salt glazed stoneware gully trap, square or round mouthed type 'P' complete all as specified and directed.

S&F Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union complete all as specified and directed.

S&F Tubular towel rail, aluminium anodised 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC bends 110 mm bore complete all as specified and directed.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC bends 75 mm bore complete all as specified and directed.

S&F PVC (SWR) junction (Single T) equal or unequal 110 mm bore complete all as specified and directed.

S&F PVC (SWR) reducers 110 mm bore complete all as specified and directed.

S&F Rotational moulded polythene water storage tanks three layered (Cylindrical vertical with closed top) hoisted and fixed in position 500 ltrs, including Ball brass valve 20 mm bore, high pressure with polythene ball & float complete all as specified and directed.

S&F 20 mm bore dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L Surface Excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L Sand filling under floors including watering and consolidation all as directed.

M&L for Machine pressed precast concrete interlocking paver blocks (shape as per sample in AGE B/R (P) sample room), with grey cement and pigment and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L Providing, cement concrete type C-0, 1:3:6 (12.5 mm graded crushed stone aggregate) in coping on edges complete all as specified.

M&L for Precast RCC 1:2:4, Type B-1 using 20mm graded crushed stone aggregate as in landings, cover slabs [for manholes etc], chullah hoods, Chajjas, water troughs, mangers, Shelves and similar articles with plain faces including formwork, set in cement mortar 1:4 complete all as specified and as directed

S&F 150 mm salt glazed stone ware drain pipes laid in trenches and jointed in CM 1:4 complete all as specified and as directed

M&L for Concrete bed to drain pipes of size 150 mm bore including packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete,Type C2, 1:3:6, using 40 mm graded crushed stone aggregate complete all as specified and as directed

M&L PCC type C2 1:3:6 (40 mm graded crushed stone aggregate) in surface channels and drain complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

Cutting into existing manholes for 150mm dia pipes, connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as required complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

M&L cement concrete type C2 1:3:6 (40mm graded aggregate) in Mass concrete (as in foundation for fencing posts and the like) complete all as specified and directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of surfaces treating ends of posts, backs of chowkhats, etc area tarred exc 0.1sqm but nexc 0.5 sqm each treated with tar or coal tar black paint complete all as specified and directed.

Supply of chain link MS Galvanised fencing , any size or type complete all as specified and directed.

Fixing only 4mm dia galvanised steel wire, (Chain Link) 75mmx75mm mesh including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and directed.

S&F MS bolts n exc 12 mm dia and 65mm long purpose made with hexagonal or square head one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square not exc 30 cm long complete all as specified

M&L for preparation of steel and iron surface not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome primer complete all as specified and directed.

S&F Mild steel round bars 10 mm dia and over, cut ot length, bent to shape required, including cranking, bending as in line wire in chain link fence etc., hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. (Fe-410) complete all as specified and directed.

Taking down carefully aluminium/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing and keeping items aside in safe custody for reuse such as regulators, light fitting, MCBs all as specified and directed.

M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per srl item No-97 here in above but for One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size complete all as specified and directed.

All as per srl item No-97 here in above but for One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified and directed.

All as per srl item No-97 here in above but for One 3 pin socket outlet, 15 Amps, independent, with cables 2.5 sq. mm size complete all as specified and directed.

supply & fixing switch piano flush type, 05/06 Amps single pole, one way 240 volts complete all as specified and directed.

S&F switch piano flush type, 06 Amps single pole, one way complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 6 Amp flush type universal complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 6 Amp flush type universal complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 6/16 Amp flush type universal complete all as specified and directed..

M&L for switch socket combination out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts complete all as specified and directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/poly carbonate isolated body complete all as specified and directed.

S&F decorative ultra slim linear LED 20 Watt 4' long lighting fixture with extruded aluminium heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete all as specified and directed.

Supply and fixing LED lamp 9 W complete all as specified and directed.

S&F LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed.

Supply & Fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and Fixing exhaust fan 300 mm sweep PVC body with louver, 230 volts AC single phase, 50 Hz, RPM 1200 ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed.

Supply and Fixing in replacement exhaust fan 300 mm sweep PVC body with louver, 230 volts AC single phase, 50 Hz, RPM 1200 ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and directed.

Supply and fix in replacement electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and directed.

Material & labour for earthing in repiars complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 4mm dia by means of lugs, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed.

Supply & fixing MCB, SPN (single pole neutral), AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified and directed.

Supply, laying in trenches or fixing on wall, testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor complete all as specified and directed.

Supply, laying in replacement in trenches or fixing on wall, testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor complete all as specified and directed.

Supply, laying in replacement in trenches or fixing on wall, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 4 core armoured, PVC sheathed with aluminium conductor complete all as specified and directed.

Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed. Note : Punned thickness 18 cm will be measured.

M&L for Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' bricks, laid across the cable complete all as specified and directed.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, Triple pole and neutral, AC, 415 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply and fixing MCCB, 4 pole 415 volts capacity 63 Amps, 16kA and making connections complete all as specified and directed.

M/S M.S. BUILDERS

M/S Sheikh and Co

M/S SHEIKH FEROOZ AHMAD

JANDOO AND CO

M/S BILAL AHMAD BHAT

RASHID CONSTRUCTIONS