REPAIRS/ REPLACEMENT OF OLD ROOF SHEET, BRICKWORK, PLASTER, FLOORING AND OTHER ASSOCIATED WORKS IN BARRACK No. 9, 1, 9A AND BLDG NO 52 OF NCC OTA ACADEMY AND OTHER MISC B/R WORKS IN NCC AREA UNDER AGE B/R-II KAMPTEE.

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish of the premises complete all as specified and directed.

M&L for coloured glazed ceramic tiles 300x450x 6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished area each tiles not exc 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

All as item No 3 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering complete all as specified and directed.

Dismantling of timber fillets unframed under 40 Sq cm in section complete all as specified and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat conforming to Fe-410-w(Gde E 250) quality A etc complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating G.I. based Corrugated (Mangalore pattern) steel sheet of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw as per manufacturer instructions complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of any colour having tensile strength of 550 MPA as in ridges/ valley, fixed with and including self tapping screw as per manufacturer instructions complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L rendering 10mm thick on brick work or concrete surfaces with CM (1:6) finished fair and even complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described, exc 10 cm width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

S&F aluminium (powder coated) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as specified and directed. Notes: - (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/ tint. Make of Aluminium Sections (powder coated): Jindal or equivalent.

M&L for aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications complete all as specified and directed. Make:- Grill No. 20 of 'DECO GRILL' or equivalent.

Supply, fabrication and fixing anodised aluminium doors fixed or openable including frame/ chowkats etc from hollow rectangular sections like chowkats of size 100 x 44mm x 1.59mm (appx), vertical styles of size 82 x 44 x 159mm (appx) top and middle rails of size 82 x 44 x 1.59mm (appx) bottom rails of size 114 x 44 x 1.59mm (appx) complete including necessary jointing cleats, glazing clips, anodised aluminium beading and rubber gasket etc for securing glass, anodised aluminium fittings such as handles, other standard fittings, aluminium tower bolts - 2 Nos, Hydraulic Door closer of designation No 3 - 01 No and accessories for locking arrangements etc complete all as specified and directed. Note:- Glazing shall be measured and paid for separately under respective items complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F in repairs 4.00 mm thick tinted sheet glass ordinary quality and glazing with Al glazing clips& EPDM beading in square exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 6mm thick asbestos cement corrugated sheet, in roofs, wall etc and fixed with ‘L’ or 'J' hooks or cranked bolts or self taping screws with washers complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC type D2 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for chequred tiles 300 x 300 x 25mm thick, rubber finished, set jointed and pointed in neat cement slurry as in floors with grey cement and pigment including screed bed or bedding layer of 15mm thick mortar for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1(using 20mm graded stone aggregate) as in roof kerbs or mud stops, steps, rounded or chamfered on edges complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate), as in plinth protection and finishing even & fair complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.64,500.00]

M/s B S Jain

DEESHA CONSTRUCTIONS

M/s M.G. Hargunani

Meet Road Lines

chronicle enterprises

M/s Jagdish Staioners and General Stores

M/s Rahul Traders

Bidder Name

Meet Road Lines

chronicle enterprises

DEESHA CONSTRUCTIONS

M/s B S Jain

M/s Rahul Traders

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

M/s T.S.JOHAR