01- PDS Shop- Mottanuthu

Amount

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering,bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site; etc., complete complying with standard specification.

Supplying and filling in foundation and basement with M.Sand in layers of not more than 15 cm thick, well rammed, watered and consolidated etc., complete complying with standard speciication

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.

Supplying and filling with Gritty gravel including all labour charges for filling including watering ramming, consolidation and other incidental charges etc., complete

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete

Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcemeat and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof

Supplying, fabricating and placing in position Mild Steel/ Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to ma

Brick work in following Cement Mortar using best quality II class ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Providing granolythic flooring in CC 1:2:4 mix 25 mm thick including all materials and all other labour cost complete complying.,

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finished the exposed surface of all RCC items of work such as slabs,beams,sunshades,facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 ( one cement and three sand ) 10 mm thick including hacking the surfaces

Supplying and fixing in position white/ colour glazed european water closet of best quality and approved make with 100 mm "p" or "S" trap connecting with CI Pipe of 100 mm dia /PVC pipe

Supplying and fixing in position best quality PVC soil/ wastepipes of various dia having 6 kg/ sq.cm pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC/MS clap

110 mm dia PVC soil/waste pipe

75 mm dia PVC soil/waste pipe

Finishing the top of the roof with one course of new machine pressed tiles of size 23x23x2

Provision for cupboard cuddapah slab 40mm thick,including supply and fixing etc,

Fabrication, Supplying and fixing of steel door made out of 40 x 40 x6mm M.S angle section for outer frame and shutter made out of 35 x 35 x 5mm M.S angle section with necessary stiffner 32 x 6mm flats not exceeding at 30cm intervals and necessary cross diagonal M.S flat of size 32 x 6mm. A tie bar of 32 x 6mm M.S flat is used in bottom of frame in order to avoid twisting of door frame. The shutter frame shall be fully covered by 18 gauge C.R.CA sheet and provided. A tiebar is provided at the bottom of the outer frame toprrevent twisting of frame during transportationand fixing. All members should be given one cost of materials labour charges and all incidentialcharges and fixing charges (1.00*2.10)

Manufacturing, supplying and fixing in position of steel windows with the following specifications. Outer frames of windows made of "Z" section F7D of size 33x25x3 mm at 1.419 Kg/m and mullion "T" section (F4B) of size 46*25*3 mm at 2.28 Kg/m and shutter section of made of F7D of 33*25*3 mm at 1.419 Kg/m as specified in IS 7452/1990

Two leaves

Supplying, fabricating and placing in position Steel glazed ventilator with two panes in all floors with aluminium section of the following

Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet

Supplying and painting the walls with two coats of oil bound distember over one coat of water based cement primer including cost for distember primer, cleaning and scrapping the walls rendering the walls smooth with necessary putty

supplying and painting the walls with two coats of cement paint over one coat of cement primer as instruted be the departmetal officers including preparation of surface curing., etc.,

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floor excluding cost of pr

Flooring laying with new scratch proof ceramic tiles of size 300X300X6 mm laid in CM 1:3 including cost of white cement and labour charges etc.,

Dadooring the walls with new glazed tiles of size 300X300X6mm laid in 1:2 , 10 mm thick and painting with white cement using 0.40 kg/m2 including finishing the joint and pointing flush with ties surface

Providing water supply arrangement including all cost etc., complete

provision for 500 lr HDPE tank

25 mm PVC Pipe

25 mm PVC Elbow

25 mm PVC Ball Valve

25 mm PVC Tee

20 mm Tap

Provision for Electrification

Light Point / Fan Point

Plug Point

fuse unit

Tube Light

ceiling fan

Service main

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

M. Gunasekaran (BID ID -1219395)