Interior Works for Proposed Development of Gadakhai near Barabati Fort in Cuttack District.

INTERIOR & FURNISHING WORKS.

Gyp Board Ceilling :-Providing and fixing Gypboard suspended false ceiling (single layers) in different levels, recesses,flat areas as per design with G.I. Framework using Gypsteel of perimeter channels, intermediate channels and ceiling sections) and 12.5 mm taped edge gypboard screw fixed to ceiling section as per design , complete with fixing and finishing of tapered and square edges of board with jointing compound paper tape and 2 coats suitable primer and painting the entire ceiling area with plastic emulsion paint (2 & more coats ) to get an even shade including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge . Measurement will be taken flat area of the ceiling for payment

Grid Ceilling (DUNE RH 99/Equivalent) :-Providing & Fixing of Mineral Fibre Board of microperforated, finely granulated surface texture , beveled tegular edge with 6mm Black Revealed exposed grid Suspended False Ceiling System, with tiles of Humidity Resistance (RH) of 99%, NRC Upto 0.5, αw value 0.6, CAC- 34dB ,Light Reflectance >85%, thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class- 0/ Class -1 (BS476 Part 6&7) in module size of 600 X 600 X 16 mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 63%, fixed to G.I.grids of system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm, having stiches both perpedicular and horizontal to make it stronger, and a load carrying capacity of minimum 15.68 Kgs/Sqm. The Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 120 grams per SQM & passed through 500 hrs of Salt test. The main G.I. runner spaced at 1200mm centre to centre securely fixed to the structural soffit using G.I. suspension system at 1200mm maximum centr to centre & not more than 150mm from spliced joints. The First/Last suspension system at the end of each main runner should not be greater than 600mm from the adjacent wall. 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm modules to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross tees. Perimeter trim to be shadow wall angle (dimensions: 19x7x7x14mm), secured to walls at maximum 450 mm C/C, complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge. The rate includes all complete with materials, labour, T&P, taxes etc. (Fixtures should be independently supported from the soffit).

SOFT Mineral Fibre( OPTRA/Equivalent) Acoustical Ceilling :-Providing & Fixing of Knauf Fibre Glass Acoustical Suspended Ceiling System Optra Microlook 90 Edge Tiles with Knauf Suprafine 15mm face exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95(Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, , Light Reflectance ≥88% as per ASTM E-1477, Colour Pebble White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 20/25mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 85% Tiles Size 1200x300 etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge.

Full ht. Solid Partition with bothside laminate :-Providing and fitting of full height double skin solid partition of Al.9222, 100mm thk upto false ceiling level or as per drawing/design made out of 63.5mmx38.1mmx2.5 mm anodised aluminium hollow vertical and hozinzontal sections to be placed @ minimun 1000mm c/c (or any additional member wherever required to be provided and every alternate vertical sections are to be fixed to the true ceiling) and providing necessary cutouts to run the cables inside the partitions both horinzontally and vertically and both side covered with 12mm thk Marine ply (conforming to IS code :710) and finished with 1.0mm thk decorative laminate of approved shade and colour with approved adhesive (No screws should be visible) etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge.

Wooden Panneling with Veneer:-Providing, fitting and fixing full height wooden paneling to walls and columns wherever necessary from floor lvl to ceiling ht or as per drawing/design made out of 50.8mmx25.4mmx1.34mm thick Aluminium rectangular sections placed @ 600mm c/c both ways on grid, on top of grid 12mm fire resistant and termite proof ply (conforming to IS code :5509) to be provided with 4mm thk veneer of approved shade and colour finished with melamine polish as per design/drawing or as directed by the Architect/Engineer-in- Charge. The rate includes cost of cutouts for electrical switches, light fixtures, wall bracket fans if any etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge.

Acoustic Wall panelling :-Providing and supplying ‘Optra/Equivalent Acoustical Wall Panelling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric with an option of colours as per the choice of the Architect/Person in-charge of size 2100x600 x25 or 600x600x25 mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd or construction adhesives as per the instructions laid down by the manufacturer etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge.

Partly Glazed Door with bothside laminate :-Providing, fitting and fixing of approved make 35mm thick (laminate finished thickness of the door) factory made flush doors of the followings size finished with 1mm thk. laminate of approved colour & shade to both side fixed to the teak wood bidding.The glazing portion of the door will be as per drawing & design, made out of 8mm thick toughtned glass with itching as per drawing/design to be fixed with 50x18mm/ 48x24mm teak wood beading finished with melamine polish. The glass joiniting shall be tightened with silicon or with approved jointing material for proper rigidity. The door will be provided with all necessary fittings & fixtures, i.e. Baan Code-LKYPDC527/Equivant), 125x75x3mm (code no-7912/Equivant) SS 301 hinges, etc. of approved make etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge.

Fully Glazed Door:-Providing, fixing, fitting of fully glazed door made out of Black powder coated aluminium frame using door section of 19501 of Jindal make with top, bottom and vertical member, Glazing clip no19352 and jointing angles and 10mm thk toughened clear glass with itching as per drawing/design with all necessary hardware including long S.S handle to both side, etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge.

Blinds :-Providing & fixing of Marvel or equivalent make Roller Blinds (polyster fabric, bright translucent, acute screen, soft translucent etc.) by using powder coated alluminium channel (size 50mmx40mm & weight 0.33 kg/m) with PVC weighter for lower part of the fabric including acrylic runner with pressure hanger clip, operation chain/ glass rod, cord weight with handle (PVC) complete with all accessories etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge.

SOFT BOARD :-Providing and fixing of soft board with aluminium frame and approved fabric for display drawings/documents etc. as per design/drawing etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge.

RAISED FLOOR :-Designing, Providing & Fixing of Anti-termite Structurally Stable considering Design Load of 5T/MSquare weight Raised Floor an elevated floor above sub floor, Steps with M.S Framing structure, Pedestal, floor Panel, Grid Element, 12mm thick fire retardant Play finished with 14 mm thk Engineered wood flooring having 2.5 mm thk natural wood veneer (Dr Décor or equivalent ) finish & all branded hardware accessories with enamel paint etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

NATURAL WOODEN FLOORING (VOX FLOORING/Equivalent):-Providing and laying in position Anti-termite14mm thick Engineered wood Flooring of approved shade of size 540mm x 90x14mm having smart lock tongue and groove joints to secure long lasting joint. The material comprising of three layers, Top layer is of genuine hardwood surface, the middle layer is of pine or spruce ribs laid transversely and the third layer is stabilizing bottom layer. The floor is finished on top with three course of formaldehyde free oil or five course of UV curved formaldehyde free lacquer. The boards are installed on foam and plastic on top of the under floor and stuck to one another using adhesive in the groove of the board all complete including all accessories (corner beading, Door sill).(Make :- Dr.-Decor/Equivalent) etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

CARPET FLOORING:-Providing & Placing of approved size carpet of machine made textile floor covering and includes modular carpet (Quality of material, Thickness, Colour, Texture Satisfaction/ approved by Engineer-In-charge and Consultant of welspun or equivalent etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Decorative LATERITE Stone Pedestals 600x600x450mm :- . Providing and fixing 1st quality, Small eyed Laterite Stone masonry work with Chemical Adhesive(H40 Gel Kerakoll or equivalent) and jointing with coloured Chemical Grout (Fugabella-2- 12/0-5 kerakoll or equivalent ) including pointing (if required) pigment of matching shade complete with required shape and size as per direction of Engineer-In-Charge at all floors and all heights etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Supplying & fitting fixing of Room/Ofice Furniture etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

RECEIPTION Table-Size :1800 L x 600D x 1050 ht-made up of 18mm thick pre laminated board with 2mm PVC edge banding *The desks come with integrated drawer and hinged storage. *Metal organizer plate provided on the recess areas allow provision for sticking notes . Make- ISIT/Godrej/Equivalent as per instructions of Architect and Engineer In Charge .

RECEIPTION Chair-LUXY MBGS ADJ ARMS MAKE:-ISIT/ Any approved Equivalent make * LUXY Medium Mesh Back Revolving Chair * Fabric Upholstered Cushion Seat * Single Lock Synchro Mechanism * Adjustable Lumbar Support * One Way Adjustable Arms (Height) * 5 Prong Nylon Base with Castor * Gaslift For Height Adjustament . Or any equivalent product of any approved make as per instructions of Architect and Engineer In Charge .

RECEIPTION Visitor's Chair-ROBO Medium PP (Black)Back Mesh Chair (MAKE ISIT/Godrej/ Any approved Equivalent make ) ,* Fabric Upholstered Cushion Seat * Fixed Arms * Powdercoated 4 Legs , or any eqivalent product of approved make as per instructions of Architect and Engineer In Charge .

3-seater Soffa-MORABO 3 Seater leatherette Sofa Size : 1800 (W) x 725 (D)x 700 (H) MAKE:-ISIT/Godrej/Equivalent Fabric 3 Seater With Chromeplated Legs & Frame etc. as per instructions of Architect and Engineer In Charge.

2-seater Soffa-MORABO 2 Seater leatherette Sofa Size : 780 (W) x 725 (D)x 700 (H) MAKE:-ISIT/Godrej/Equivalent make Fabric 3 Seater With Chromeplated Legs & Frame etc. as per instructions of Architect and Engineer In Charge.

Center Table-CENTRE TABLE (EF-CT804) MAKE:ISIT/Godrej/Equivalent SIZE : 1050X600X450HT etc. as per instructions of Architect and Engineer In Charge.

Display Hall Table-Gablend Table Size:-1500x750x750 Side Storage:-900x450x750 Make:-ISIT/Godrej/Equivalent make Specifications Table Top - 25mm thick Pre Lam particle board with 2mm edge lipping on all exposed sides Support - Supported on 25mm thick Pre- Laminated Partical Board Gable ends & 18mm Thick Pre-Laminated Partical Board Modesty Panel with suitable spacers & Levellers. etc. as per instructions of Architect and Engineer In Charge.

Display Hall Executive Table-PINNACLE CABIN TABLE (MAKE ISIT/Godrej/Equivalent make ) MAIN TABLE: 1800W X900D X 750HT TABLE TOP SIDE COMP STORAGE 2D1F: 1050 X 450 X 640HT Specifications: Table top: Made of 25mm thick prelaminated particle board of approved shade. All the edges of cabin table surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. Modesty Panel: 18mm thick 450mm ht plt modesty panel is considered.Wich is machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. Under Structure Support: 25mm thick PLT gable end. Wire Management: 300mm Anodised flip up Made of Aluminum in anodised finish, which has soft closure and three way wire acess & PVC cable dump. Vertebra for wire entry. Side Composite Storage 2D1F: Storage is made of 25mm thick top, 18mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of stoarge surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. with openable shutters, adjustable shelves, auto closing hinges, locking mechanism, finger groove handles and 2D+1F Drawer unit with Regular locking system.etc. as per instructions of Architect and Engineer In Charge.

Execitive Chair-FORTUNE MBGS ADJ ARMS - HEADREST Make:-ISIT/Equivalent * Fortune Medium back mesh chair * With Headrest * Cushion Seat * Self Calibrate Multilock Mechanism * Adjustable lumbar support * One Way Adjustable Arms ( Height) etc. as per instructions of Architect and Engineer In Charge.

Officer's Chair-LUXY MBGS ADJ ARMS MAKE:-ISIT/Godrej/Equivalent make * LUXY Medium Mesh Back Revolving Chair * Fabric Upholstered Cushion Seat * Single Lock Synchro Mechanism * Adjustable Lumbar Support * One Way Adjustable Arms (Height) * 5 Prong Nylon Base with Castor * Gaslift For Height Adjustament etc. as per instructions of Architect and Engineer In Charge.

Visitor Chair-*ROBO Medium PP (Black)Back Mesh Chair (MAKE ISIT/Godrej/Equivalent Make) * Fabric Upholstered Cushion Seat * Fixed Arms * Powdercoated 4 Legs etc. as per instructions of Architect and Engineer In Charge.

Auditorium Chair-SCHOLAR Auditorium chair with Auto TIPUP & individual Arm Rest Size 560 mm ctc. Make-ISIT/Godrej/Equivalent make * Metal frame for seat & back. * 3 mmFoam laminated fabric. * Moulded PU foam of 45 to 53 density. * Wooden/PPCP ARMREST without cup holder. * PPCP tray for seat & back. * Seat numbering for seat & back both. * Black powder coating surface. * Auto tip up feature. * Suitable for RCC Flooring etc. as per instructions of Architect and Engineer In Charge.

Storage unit for office-PLB OPEBANLE SHUTTERS STOAGE SIZE: 1200W X 450D X 1200MM HT MAKE:-ISIT/Godrej/Equivalent make Specification: The storage top 25mm thick, shutter & sides panel are made of 18mm thick & back panle is made of 09mm thick prelaminated particle board of approved shade. All the edges of storage surface shall be provided with machine pressed imported PVC lipping glued with hotmelt Eva glue free from any VOC.with finger groove handle & suitable lock.All exposed area PVC edge lipping. etc. as per instructions of Architect and Engineer In Charge.

PEDESTRAL INSIDE :- Providing and fixing of pedestral made out 19 mm th WPC ply , & finshed with 1mm th LAMINATE at ouert side . All beading & outer surface to be finished with mellamine /pu polish to match the laminate as per the detail design and specifications and inclusive of all cost of labour, hardwares T&P etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

BARABATI FORT MODEL :- Providing supply fixing & installation of scale model of the ancient Barabati Fort will be executed at a scale of 1:200, resting on a substantial 3.6m x 3.6m podium constructed from seasoned hardwood framing with a premium veneer finish to match high-end interior joinery. The topography will be sculpted from high-density EPS foam to mimic the site's undulations, featuring static grass flocking and handmade twisted-wire trees for realism. Architectural elements, including the iconic gateway and ruins, will be fabricated using laser-cut ABS and high-resolution 3D resin printing, texturized to replicate the authentic laterite masonry. The moat will be a key visual feature, created with poured epoxy resin over a graduated painted base to simulate water depth and ripples. A concealed LED lighting system will accent the ruins, while the entire assembly is enclosed in a 12mm toughened extra-clear glass cover anchored securely into the wooden base etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Civil Works

Earthwork in excavation of foundation trenches in all kinds of soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work etc complete as directed by the Engineer-in-charge.

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.

Providing Laterite masonry in foundation & plinth using approved size Laterite stone in cement mortar (1:6) after spraying water over the Laterite to clean it from the dust/ mud particles as per drawings. including cost, conveyance, royalties, loading and unloading of all materials, including cost of all labour,curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.

Providing small eye Laterite masonry work(with specified decorative finishing work) using approved size machine cut small eye decorative type Laterite stone in cement mortar (1:4)/ Required chemicals mixed with pigment to match the shade of the stone ,including washing and cleaning etc.as per the architectural drawing including cost of all materials, labour, conveyance, loading & unloading, roylalities, watering, curing, sundries, T&P etc., complete as per dorection of the Engineer-in-chage.

Providing small eye Laterite masonry work using approved size machine cut small eye decorative type Laterite stone in cement mortar (1:4)/ Required Chemicals mixed with pigment to match the shade of the stone ,including washing and cleaning etc.as per the architectural drawing including cost of all materials, labour, conveyance, loading & unloading,roylalities, watering, curing, sundries, T&P etc., complete as per dorection of the Engineer-in-chage.

Supplying, Diluting & Spreading Chemical Emulsion like CHLORPYRIPHOS OR Other Chemical approved by the Central Insecticides Board as directed by the manufacturer and spraying the mixture uniformly by the sprayer as pre-constructional anti-termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate of 7.5 liters (or as directed by the manufacturer) per Each sqm on vertical and 5.0 liters per Each sqm on horizontal surfaces, 50% of the emulsion to be filled in center to center etc. complete as per the holes made in trenches at 150m.m IS:6313/1981(Part-II) complete including cost, conveyance, loading, unloading and taxes of all materials, cost of all labour, T&P, sundries and scaffolding where required for the work etc. as directed by the Engineer -in -charge.

Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete as per the direction of the Engineer-in-Charge.

Providing 20mm thick cement plaster with cement mortar of (1:4) as grading plaster including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.

Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete as per the direction of the Engineer-in-Charge.

Providing 6mm thick cement plaster in all floors at all height with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete as per the direction of the Engineer-in-Charge.

Painting two coats of synthetic enamel paint over Iron Works as per approved shade of approved quality over one coat of primer, sand papering, polishing the surface including cost, conveyance, taxes, materials, labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use)

Providing and painting two coats with plastic emulsion paint of approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per relevant BIS code and as per the direction of Er-in-charge.

Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per relevant BIS code and as per the direction of Er-in-charge.

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade (weather coat) of approved make & shade manufactured by reputed manufacture like NEROLAC /ASIAN /BERGER /DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge.

Providing scraping & cleaning with wire brush ,grinding, washing & cleaning with water & air jet to make the surface smooth & workability for application for two coats of sika guard 703 W 2c over the masonary surface to create a Hydrophobic action etc complete as per direction of Engineer-in-charge.

Repairing of damaged / defective R.C.C / P.C.C work or any Water leaked damaged Masonry work(Pointing work of joints) using High Strength Crystalline technology based Waterproofing cementous repair mortar having: a) Initial setting time of 4.11 hours - ASTM C 266 b)Rapid Chloride Permeability of 420 Coulombs in 90 Days - ASTM C 1202 c) Compressive strength 59.3 Mpa in 28 days - ASTM C 109 ,c)Superior bond strength of 2.3 Mpa as per ACI-503R,d)Chemical durability (mass loss negligible i.e. 0.22% in 84 days - ASTM C 267) with smoothening and resurfacing of the area by using all required tolls and safety equipments along with necessary arrangements of scaffolding to reach the required height with high strength crystalline based cementous repair mortar etc. complete in all respect as per the direction of the E.I.C.

FIRE FIGHTING SYSTEM

FIRE EXTINGUISHERS

Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity.Make-Safex,Omex,Kanex/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Providing and fixing Co2 type fire extinguisher as per IS 2878 with discharge time of 10 sec to 18 sec and gas storage pressure of 85 kgf/sq cm with internal charge.

i)Capacity 4.5 kg.(Wall Mounted)

ABC chemical powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket etc. complete, confirming to IS:15683

Providing and fixing 9 Litres capacity of Mechanical Foam fire extinguisher

AUTOMATIC FIRE ALARM SYSTEM

Supplying, installing, testing and commissioning of 2 Loop Addressable Main Fire alarm control panel of with 24v DC battery back up,Make-Firelite,Morley IASo/ LG /Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Supplying, installing, testing and commissioning Addressable Photo Elelectric Smoke Detector,Make-Firelite,Morley IAS /Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Supplying, installing, testing and commissioning of Adressable Manual call points, break glass type made out of M.S.CRCA sheet with Hammer and chain, Powder coated finish of approved color, as per specifications.Make-Firelite,Morley IAS/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Supplying, installing, testing and commissioning of Addressable type Electronic Hooter dual tone type with suitable M.S.CRCA housing and wiring circuit, with powder coated finish of approved color.Make-Firelite,Morley IAS/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Supplying, laying, testing and commissioning of Response Indicator for Above Ceiling Detector-Make-Firelite,Morley IAS/Equivalent

Supplying, laying, testing and commissioning of 2 runs of 1.5 sq.mm cross section PVC insulated copper wires in the M.S. conduits.Wires shall be as per IS : 1554.Make-Finolex/Polycab/RR/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Supply, installation of PVC conduits having 1.5mm wall Thickness with necessory fittings like Junction boxes, collars, saddles screws on walls / ceiling / embeded in the walls etc.complete.Make-AKG/Any ISI Mark /Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

20 mm dia.

SIGNAGES

Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down,Fire Exit Arrow Left,Fire Exit Arrow Right"of 1.5cm height letters in white with green back ground.The size of the board shall be 25cm x 15 cm and shall be fixed at the height of 2 mts/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Illumination Glow light for Exit Indication with Battery Back-up,Make-Agni Device/Prolite/Any ISI Make/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Audio Visual Equipments with Content Development

Graphics Animation Based Film on Barabati Fort:-Development of a high Quality 3D Graphics Animation Film depicting the historical, cultural, and Architectural significance of Barabati Fort etc. complete in all respect including Script-to-screen execution (Story Content to be provided by OTDC Ltd/ASI Authorities),Architectural reconstruction based on references provided,Final output suitable for display at visitor centers, exhibitions,Museum and events,Duration - 15 to 20 Mnts. Deliverable - Full HD / 4K (as required) on hard drive/Pen drive etc. complete in all respect as per the direction of the Architect and Engineer - In - Charge .

Barabati Fort Virtual Walkthrough (Historical Recreation):-Design and development of an Showcasing Barabati Fort as it existed during its functional era. The experience will allow users to visually explore the fort in a realistic, historically inspired digital environment inluding 3D reconstruction of Barabati Fort (as per historical inputs), Optimized real- time walk through experience, VR-compatible content development , User-friendly navigation , Testing and optimization for smooth performance , Deployment- ready build for on-site usage. Content to be finalised by OTDC Ltd/ASI Authorities . Duration - 10 to 15 Mnts . Deliverable :- 6 nos of good quality VR (Vertual Reality) head sets (make - Metaquest / Samsung) suitable for public demonstration and tourism use & Full HD / 4K (as required) on hard drive/Pen drive etc. complete in all respect as per the direction of the Architect and Engineer - In - Charge .

P.A , SIGNAGES & AUDIO VISUAL SYSTEM FOR AV ROOM

DIGITAL SIGNAL PROCESSOR Supply, installation, testing and commissioning of DSP core with Dante on a dual NIC, 16 user-configured card slots 7 x I/O card with dual-channel microphone or line level input, switchable 48V Phantom power, software-controlled functionality. 3 x I/O card with dual-channel line level output, software-controlled functionality. 2 x GPIO Card. USB 2.0 to Dante network endpoint, PoE-powered with single CatX cable and suitable for mounting under the table or behind a display, with UC mute sync. Softwarelicensed Acoustic Echo Cancellation (AEC) for the DSP. Eight channels at 250ms, 16 channels at 100ms delay Approved Make: Xilica/ Bose/ Biamp/OSL etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

FOH SPEAKER Supply, installation, testing and commissioning of Passive Column Loudspeaker with min 12 X 2" Driver or better; RMS 120W @ 12 Ohms or better ; Frequency range : 120Hz – 20Khz ; Sensitivity 92 dB and Max SPL 113 dB; Beamwidth @1KHz : 174° x 9° (H X V) or better (Horizontal more is better; vertical less is better), Power Taps (100 V): 40W/20 W/10 W/ 5 W or better ; OEM Mounting Bracket to be Included, Construction : Aluminium, CE Certification or more. Approved Make: Audac/ British Acoustics/ Bose/ OSL etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

AMPLIFIER Supply, Installation, testing and commissioning of Dual Channel power amplifier, RMS/AES power handling @ 4 Ω : 2 x 250 W, @ 8 Ohms : 2 x 130 W, @ 8 Ohm Bridge : 1 x 500 W, Frequency response: 20 Hz - 20 kHz, Signal / Noise: > 90 dB, THD+N (@ 1 kHz): < 0.1%, Crosstalk (@ 1 kHz): > 70 dB, Technology: Class-D, Inputs sensitivity: 0 dB (1V RMS), Protection: DC Short circuit; Over heating; Over load; Signal limiting; Convection cooled, should be energy star rated, etc., CE Certification or more. Approved Make: Audac/ British Acoustics/ Bose/ OSL etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

PTZ CAMERA Supply, Installation, Testing & Commissioning of Full HD PTZ Camera supporting 1080p at 60 Frames per Second, minimum 12X Optical Zoom with FoV of minimum 70 degree and minimum 100 or Higher presets. Camera should support simultaneous outputs through HDMI, USB 3.0 & IP/3G-SDI, Audio In and controllable via RS232/422 and IP. Panning angle -170° ~ +170° , Tilting angle -30° ~ +90. Camera should support SRT, PoE & should be compatible with Virtual USB Driver. 5-Year Warranty. Make: Trueview/ Honeywell / Sony/ etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Supply, Installation, Testing & Commissioning of wall mount PTZ camera stand etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

TRANSMITTER Supply, installation, testing and commissioning of of a Transmitter with 1x HDMI input and 1x RJ-45 output which should support a resolution up to 4K60 4:4:4 video, It should support the HDCP up to 2.3, For UHD and 4K signals, TX . should be able to pass HDCP 2.2, EDID, & CEC. Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio. A cable length up to 130 ft (40 m) for UHD and 4K. Approved Make: CRESTRON/ LIBERTYAV/4thewall etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge.

RECEIVER Supply, installation, testing and commissioning of a Receiver with 1x RJ-45 input and 1x HDMI output which should support a resolution up to 4K60 4:4:4 video, It should support the HDCP up to 2.3, For UHD and 4K signals,RX.Should be able to pass HDCP 2.2, EDID, & CEC. Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio. A cable length up to 130 ft (40 m) for UHD and 4K. Approved Make: CRESTRON/ LIBERTYAV/4thewall etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

4x2 HDMI Matrix Switcher Supply, installation, testing and commissioning of HDMI Switcher with 4X4 configuration which should support 4K60 4:4:4 HDR Presentation System, HDMI ports support video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported. At the input end it should have minimum 4x HDMI inputs and 4x HDMI at the output. HDCP 2.3 compliance should have HDMI audio de-embedding built-in. Should suppport enterprise grade security. Should have 1X Ethernet with IEEE 802.1X, Secure CIP, Authentication, SSH/SSL, TLS. Should have 1 RU 19-inch with mounting accessories. Should have power supply or external power supply sould be included. Approved Make: CRESTRON/ LIBERTYAV/4thewall etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

USB EXTENDER Supply, installation, testing, and commissioning of a high-performance USB extension solution that enables reliable, long-distance transmission of USB signals over a single CAT5e cable. Extends any USB 1.1 or 2.0 device up to 100 meters (330 feet). USB 2.0 up to 480 Mbps, USB 1.1 up to 12 Mbps. Approved Make: CRESTRON/ LIBERTYAV/4thewall /Mx etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

USB TRANSMITTER Supply, installation, testing, and commissioning of a high-performance USB Transmitter that enables reliable, long-distance transmission of USB signals over a single CAT5e cable. Extends any USB 1.1 or 2.0 device up to 100 meters (330 feet). USB 2.0 up to 480 Mbps, USB 1.1 up to 12 Mbps. Approved Make: CRESTRON/ LIBERTYAV/4thewall /Mx etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

USB RECEIVER Supply, installation, testing, and commissioning of a high-performance USB Receiver that enables reliable, long-distance transmission of USB signals over a single CAT5e cable. Extends any USB 1.1 or 2.0 device up to 100 meters (330 feet). USB 2.0 up to 480 Mbps, USB 1.1 up to 12 Mbps. connectivity for up to two USB devices. Approved Make: CRESTRON/ LIBERTYAV/4thewall /Mx etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

HDMI TO USB CONVERTER Supply, Installation, Testing, & Commissioning 1 in 2 out HDMI distribution amplifier/splitter which should be HDMI 2.0 4K@60Hz 4:4:4 HDCP 2.2 Compliant and each output of the DA can independently support automatic down‐scaling from 4K to 1080P if required. The DA should supports multiple HDR formats including HDR10 and Dolby Vision along with PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS‐HD Master Audio and DTS:X audio formats. Approved Make: CRESTRON/ LIBERTYAV/4thewall /Mx etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

98" INTERACTIVE DISPLAY Supply, Installation, Testing & Commissioning of 98 Inches Interactive Display : Diagonal size 98 Inches or higher ,Panel Technology Backlit D-LED (IPS Panel) ,with 4K resolution (3840x2160). Includes and Brightness 450 Nits or better: Viewing Angle 178 / 178 or better ,Infrared Touch Technology .RAM 8Gb or better and Storage 128GB , CPU : Octa-core or better , Inbuilt Speakers 20W x2 or better , , Operating System Android™ v14.0 or better , Connectivity with HDMI,VGA, USB , Wi-Fi, Bluetooth and Standard Intel 80pin OPS (Option) with 3 years warranty. Approved Make: LG/SONY/ PANASONIC /SAMSUNG etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

Supply, Installation, Testing & Commissioning of Commercial 55" LED Display with HDMI,VGA, USB , Wi-Fi, Bluetooth and Standard Intel 80pin OPS (Option) with 3 years warranty. Approved Make: LG/SONY/ PANASONIC /SAMSUNG etc complete in all respect including cost & conveyance of all materials,all labour cost , sundries T & P etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge.

15.6" RETRACTABLE DISPLAY Supply, Installation, Testing, & Commissioning of 15.6" retractable touch display which has a resolution of 1920x1080, HDMI & VGA input, adjustable tilt facility. Approved Make: EIS/ Arthur Holm/ Albiral etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

CPU Supply, Installation, Testing & Commissioning of CPU with Intel® Core™ i5, 16 GB RAM, 1TB SSD, along with preloaded Windows OS and MS Office with mouse and keyboard. HDMI, USB 3.0 Ports. Mini cabinet. Make: HP/ Dell/ Lenovo etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

WIRELESS PRESENTER Supply, Installation, Testing, & Commissioning of Wireless presentation system with 1 x HDMI output, Resolution: 1080 @ 60. Data Rate: 18Gbps. Input: 1x HDMI, Output: 1x HDMI. Should provide full-screen mirroring. Shall be able to control device on RS232. Approved Make: ScreenBeam/ Crestron/ Aurora etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

NETWORK SWITCH Supply, Installation, Testing, & Commissioning of 8-Port PoE switch with 8 x 1000BASE-T PoE+ Copper ports, 2 x 1000BASE-X Dedicated Fiber SFP ports, IGMP Snooping and Querier for multicast optimization, IPv4/IPv6 Layer 3 static routing, DiffServ QoS, LACP link aggregation, Spanning Tree protocol, IEEE 802.3at. Approved Make: Netgear/ Cisco/ Digisol/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

HDMI CABLE Supply , Installation , Testing & Commissioning of 1.5mtr. High-performance Cables With Molded HDMI Connectors At Both Ends. HDMI Standard Supports High-definition Video Plus Multi-channel Audio In A Single Cable. Approved Make: FALCON/ LIBERTYAV /CRESTRON/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

CAT6A CABLE Supply and Drawing of Cat6A cable 23AWG U/FTP Cable. Approved Make: Legrand/ Digisol/ Molex/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

CAT6A CABLE PATCH CORD Supply and Drawing of Cat6A patch cord, STP Cable, 1mtr. Approved Make: Legrand/ Digisol/ Molex/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

SPEAKER CABLE Supply and Drawing of High-conductivity copper speaker Cable, 2.5 SQ mm stranded tinned copper conductor, PVC insulation, twisted pair, PVC jacket in the existing surface/recessed steel/PVC conduit. Approved Make: Krystals/Legrand/Belden/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

SIGNAL CABLE Supply and Drawing of 2 core PVC insulated Cu conduction shielded microphone cable. Approved Make: Krystals/Legrand/Belden/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

PVC Pipe Supply & laying of 32/25mm PVC Pipe and accessories. Approved Make: AKG/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

SITC of Stage Box with necessary accessories. Approved Make: Custom/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

INTERCONNECTS SITC of required adequate Audio connectors. Approved Make: Neutrik/ MX/ Krystals/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

15 U RACK SITC of 12 U Mounting Rack with cooling fan, 2 nos power distribution Box, cable manager, front Glass door. Approved Make: Valrack/ Netrack/ Dlink/Equivalent etc. complete as per the detail design and specification and as per the direction of Architect in charge and Engineer in Charge

AIR CONDITIONING WORKS

Supply of Full Inverter VRF System with Modular type outdoor units (Top Discharge) , all scroll DC Inverter compressors for Cooling applications along with different types of indoors compitable with VRF ODUs with R 410 A . All inverter capacity controlling compressors shall be suitable for 3 Phase, 50 Hz. The outdoor fins should be with corrosion resistant chemical coating at factory only alongwith hydrophilic coating to shield it from Salt, Sand & other elements brought in by the air. The manufacturer must be OEM of its compressor, which is fitted in the VRF outdoor unit. It can work upto 53 Degree Celsius. All proposed outdoor unit should have minimum COP of 3.7 at 100% load condition for Cooling in standard AHRI test conditions (Ambient DBT-35 Deg C, Inside DBT 27 Def C/WBT 19 Deg C). Proposed outddor unit system should not have any deration in cooling capacity upto 39 Degree C

16 HP cooling Only

Supply of the Indoor units suitable for operation on 220V-240V, Single Phase, 50 Hz AC electric supply and shall have shall have electronic control valves to control refrigerant flow with washable Filters,BLDC motors.

4.0 TR - Ductable Unit

IR Reciver for Duct with Remote

Supply of Y-Branches

Supply , Installation , Testing & Commissioning of Inverter Ductable Unit - 2.0 TR

Installation,Testing & Commissioning of VRF Outdoor Unit

16 HP cooling Only

Installation,Testing & Commissioning of VRF Indoor Unit

2.0 TR - Ductable Unit

4.0 TR - Ductable Unit

Supply , Installation , Testing & Commissioning of of the Copper refrigerant pipes with 19mm/13mm with nitrile rubber tube insulation of following sizes Make: Nippon/ Ravi Tubes/ Mandev/ Total Line

Gas line with 19mm thick insulation

Liquid line with 13mm thick insulation

Control & Transmission Wiring

Supply Installation Testing and Commission of Control wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor and outdoor units. Make: Polycab/ Havells/ Anchor/ RR Cabel/ Finolex

Supply Installation Testing and Commission of Control wiring of 4 core x 1.5 sqmm copper in suitable conduits between indoor and outdoor units. Make: Polycab/ Havells/ Anchor/ RR Cabel/ Finolex

Supply Installation Testing and Commission of PVC drain pipe with 6mm thick nytrile tube insulation.Make: Supreme/ Finolex or equivalent

Commissioning of VRV systems including topping R410A gas as per site requirements

Supply & Installation of Galvanised Stainless Steel Slotted Tray for copper piping for the safety of nytrile insulations over copper pipe.

50mmx300mm X 50mm

Supply and Erection of MS base frame duly applied with red-oxide primer & followed by black enamel paint for mounting of outdoor units.

Outdoor Bracket

Lifting , Shifting of Indoor & Outdoor Unit from Transporter to Terrace & Scafolding

Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting complete with vanes, splitter dampers, fire retardant gaskets,hanging arrangement including fully threaded GI rods/ Gripple wire rope hangers & supports complete with end fixing as approved by clients/consultants in accordance with the approved shop drawings and specifications.Quoted price shall be inclusive of necessary scaffolding charges towards installation of supply/return/exhaust/fresh air ducts outside or within building wherever required. Refer tender specification for detail description.

Supply,Installation,Testing and commissioning of thermal insulation material for duct insulation.It shall be anti-microbial closed cell cross linked polyethylene foam with aluminium foil.

Supply, installation, testing, balancing and fixing of Powder coated aluminium extruded grill with aluminium construction collar damper for supply air as per specification & the sizes will be as per schedules and drawing.Refer technical specification for detail description.

Supply,Installation,testing and commissioning of double Layer canvas connection fire retardant cloth for the end connection of air handling unit, ceiling suspended unit, ductable indoor unit, fresh and exhaust air fan and smoke spill fan to reduce the vibration.It shall be fire rated for atleat 2 hrs.Refer tender specification for detail description.

CCTV SYSTEM

Supply of 4 MP IP Audio Dome Camera (20 Mtr IR ) (Inbiult Audio with Color Night Vision) etc complete of approve make as per the direction of Engineer-in-Charge.( Make - CP Plus /Hikvision /Honeywell)

Supply of 4 MP IP Audio Bullet Camera (20 Mtr IR) (Inbiult Audio with Color Night Vision) etc complete of approve make as per the direction of Engineer-in-Charge.( Make - CP Plus /Hikvision /Honeywell)

Supply of 16 Channel NVR (2 SATA Port ) (Upto 8 Mega Pixel Camera Supported) etc complete of approve make as per the direction of Engineer-in-Charge.( Make - CP Plus /Hikvision /Honeywell)

Supply of 4TB Surveillance Hard Disk etc complete of approve make as per the direction of Engineer-in-Charge.( Make - WD/ Seagate)

Supply of 16 Port GIGABIT PoE Switch with Fiber Port and GIGA Uplink Port of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Hifocus / Digisol/Hikvision)

Supply of 8 Port GIGABIT PoE Switch with Fiber Port and GIGA Uplink Port of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Hifocus / Digisol/Hikvision)

Supply of 9U Network Rack (Server Room) Includes PDU , FAN and Cantilever Shelf Tray of approve make as per the direction of Engineer-in-Charge.( Make - CP Plus/ Tyco / Legrand / Digisol/Dlink)

Supply of 4K HDMI Cable 5 Mtr long of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Hifocus / Digisol/Honeywell)

Supplying, installation, testing & commissioning of 43" Smart LED Television, 4K UHD,Vibrant Viewing in Ultra High Resolution, commercial type of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Samsung/Sony)

Supply & Laying of Cat-6 Cable with PVC Pipe and casing of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Legrand / Panduit /D Link/ Digisol)

Installation Testing & Commissioning of CCTV System etc Complete.

Electrical Works

INTERNAL WIRING.

Recessed / Surface wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havells/Eq) (Make of modular box,cover,switch & socket-Legrand Arteor/schneider Zencelo/Panasonic Vision/Eq)

GROUP-A

GROUP-B

GROUP-C

Recessed / Surface wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire Polycab/ Anchor / Havels/Eq) Average Length: 3 mtr

Recessed / Surface wiring to ceiling fan point with 1.5 sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Polycab/ Anchor / Havels/Eq) Group c

Recessed / Surface wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire Polycab/ Anchor / Havels/ Finolex/Eq) Group C

Supply and fixing of 5 / 6 amp socket outlet with 6 Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.

Recessed / Surface wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire Polycab/ Anchor / Havels/ Finolex /Eq)

Supply and fixing of 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Supply and fixing of 1x 6 + 1x16 amp socket outlet controlled by 1x 6 + 1x16 amp 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Supply and fixing of 6 pin 16 amp socket outlet with 16 Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of 6 pin 16 amp socket outlet ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of 32 amp Modular DP switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of 3 x 6 amp socket outlet controlled by 2 nos 6 Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

SUBMAIN WIRING.

Recessed / Surface wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/ RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

Recessed / Surface wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (2X6+1X2.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 4 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (4X4+1X2.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 4 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (4X6+1X2.5)

DISTRIBUTION BOARD

Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions.(With 2 Years Warenty)

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63Amp / 40Amp FP MCB (10KA) Outgoings-10/16/20A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq)

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door Vertical type powder coated wall mounted 4 way Vertical TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A/63A/80A/100A FP MCCB (25KA) Outgoings-10/16/32A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq)

FITTING & FIXTURE

Supply, Installation, Testing and Commissioning of Plastic body Exhaust fan 200 mm sweep 900 rpm with louvers of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj).

Supply, Installation, Testing and Commissioning of Metal body Exhaust fan 380 mm sweep 1400 rpm vheavy duty of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj).

Supply, Installation, Testing and Commissioning of 1200 mm sweep Decorative ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells SS390 /Crompton /Usha/Orient /Bajaj).

Supply, Installation,Testing,and commissioning of decorative Wall fan 300mm sweep,110watt, 230/250 volts,50HZ complete etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make- Havells/ Crompton /Usha /Orient / Bajaj)

Supply,Installation, Testing, and commissioning of decorative pedestal fan 450mm sweep,120watt, 230 /250 volts, 50HZ complete etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make- Havells - V2 Neo/ Crompton /Usha/Orient /Bajaj)

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 10 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 9 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 12 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 8 watt LED Ceiling Recessed mounted moveble Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Havells /Panasonic/LT/ Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 3 watt LED Ceiling Recessed mounted spot light in different Colour Aesthetically designed lens based of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of Profile light, LED Strip for profile lighting with aluminium chanel and defuser, long life: 30,000 burning hours, Housing: Superior adhesive for easy and worry-free installation, Other features: 240 LEDs per meter, 900 lumen per meter & comes with a driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 18 watt LED Ceiling Surface mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

Supply, Installation,Testing & commissioning of 12W LED Picture Light Chrome finish of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 31440/ Jaquar /Havells /Klite /Phillips /CG/Bajaj)

Supplying, storing, laying and commissioning of 63 mm dia HDPE pipe etc as required of approved make complete with all materials & labour as per the direction of Engineer-in-Charge.

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying and laying 25 mm x 6 mm Copper earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 3 c x 4 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 2c x 6 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 4c x 10 Sq. mm A2XFY Copper armoured Cable 1100 Volts etc. as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 4c x 16 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying and commissioning of 40 mm dia HDPE pipe etc as required of approved make complete with all materials & labour as per the direction of Engineer-in-Charge.

Supply, Installation, testing & commissioning 12W/MTR LED Strip Light having Copper Coated Strip body. CCT-3000K, CRI-≥80, IP-20, SDCM≤ 3, Lumen maintainance >50,000 burning hours as per L70 B10, 24V DC with 144W Power Supply, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Strip KL-27281/Equivalent).

Supply, Installation, testing & commissioning 30W LED COB Light having Die-Cast Aluminium body with Frosted diffuser and Vaccum metalised Reflector. CCT-4000K, CRI-≥80, IP-40, SDCM≤ 3, Lumen maintainance >50,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 4KV, Efficiency : >85%. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-40 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Strip KL-23353/Equivalent).

Supply, Installation, testing & commissioning 4 X 20W LED Track light with 2meter track having die-cast aluminium housing and coated with zinc rich primer & pure polyester powder coating of Jet Black Finish. CCT-3000K/4000K, CRI-≥70, IP-20, SDCM≤ 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%, Optical Distribution :120degree. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Proxima KL-23678/Equivalent).

Supply, Installation, testing & commissioning 12W LED Focus light having die-cast aluminium housing and coated with zinc rich primer & pure polyester powder coating of Jet Black Finish, UV Stabilized Clear toughened glass diffuser. CCT-3000K, CRI-≥70, IP-65, IK-06, SDCM≤ 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%, Optical Distribution :120degree. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Nebula KL-24268 /Equivalent).

Supply, Installation, testing & commissioning 12W LED Pilar light having die-cast aluminium housing and coated with zinc rich primer & pure polyester powder coating of Jet Black Finish, UV Stabilized Clear toughened glass diffuser. CCT-3000K, CRI-≥70, IP-65, IK-06, SDCM≤ 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%, Optical Distribution :120degree. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Nebula KL-24268/ Equivalent).

Supply, Installation, testing & commissioning 12W LED Focus light having die-cast aluminium housing and coated with zinc rich primer & pure polyester powder coating of Jet Black Finish, UV Stabilized Clear toughened glass diffuser. CCT-3000K, CRI-≥70, IP-65, IK-06, SDCM≤ 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%, Optical Distribution :120degree. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Nebula KL-24268/ Equivalent).

Supply, Installation, testing & commissioning 12W/MTR LED Strip Light having Copper Coated Strip body. CCT-3000K, CRI-≥80, IP-20, SDCM≤ 3, Lumen maintainance >50,000 burning hours as per L70 B10, 24V DC with 144W Power Supply, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Strip KL-27281/Equivalent).

Supply, Installation, testing & commissioning 12W LED Pilar light having die-cast aluminium housing and coated with zinc rich primer & pure polyester powder coating of Jet Black Finish, UV Stabilized Clear toughened glass diffuser. CCT-3000K, CRI-≥70, IP-65, IK-06, SDCM≤ 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%, Optical Distribution :120degree. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Nebula KL-24268/Equivalent).

Supply, Installation, testing & commissioning 9W/MTR LED Neon Flex having Copper Coated Strip body, UV Stabilized Silicone Moulded diffuser. CCT-3000K, CRI-≥80, IP-65, SDCM≤ 3, Lumen maintainance >50,000 burning hours as per L70 B10, 24V DC, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%, Optical Distribution :120degree. Niva Silicon Flex to be provide with aluminium profile, 150W Power Supply, Front End connector and inter connector. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Neon flex KL-23230/Equivalent).

Supply, Installation, testing & commissioning 30W LED COB Light having Die-Cast Aluminium body with Frosted diffuser and Vaccum metalised Reflector. CCT-4000K, CRI-≥80, IP-40, SDCM≤ 3, Lumen maintainance >50,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 4KV, Efficiency : >85%. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-40 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Strip KL-23353/Equivalent).

Supply, Installation, testing & commissioning 2 X 20W LED Track light with 1meter track having die-cast aluminium housing and coated with zinc rich primer & pure polyester powder coating of Jet Black Finish. CCT-3000K/4000K, CRI-≥70, IP-20, SDCM≤ 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%, Optical Distribution :120 degree. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-20 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Proxima KL-23677/Equivalent).

Supply, Installation, testing & commissioning 9W/MTR LED Neon Flex having Copper Coated Strip body, UV Stabilized Silicone Moulded diffuser. CCT-3000K, CRI-≥80, IP-65, SDCM≤ 3, Lumen maintainance >50,000 burning hours as per L70 B10, 24V DC, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%, Optical Distribution :120degree. Niva Silicon Flex to be provide with aluminium profile, 150W Power Supply, Front End connector and inter connector. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Neon flex KL-3230/Equivalent).

Supply, Installation, testing & commissioning 12W LED Focus light having die-cast aluminium housing and coated with zinc rich primer & pure polyester powder coating of Jet Black Finish, UV Stabilized Clear toughened glass diffuser. CCT-RGBW, CRI-≥70, IP-65, IK-06, SDCM≤ 3, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, Efficiency : >85%, Optical Distribution :120degree. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Nebula KL-4268/Equivalent).

Please Enable Macros to View BoQ information