NMY CHANDAULI

Laying and Jointing PVC Pipe. Heading

Manual BAR SCREEN Application- Screening of bone and Fish scale MOC- MSEP Size of spacing – 20 mm & 10 mm Make- Eco-Panacea / Axis Terra/ Equivilant

EFFLUENT LIFT PUMP Application- To feed Sewage water to Flash Mixer Type- Centrifugal, Monobloc, horizontal Capacity- 2.5m3/hr, Head- 10 m, MOC – CI, Make – Kirloskar (1W+1S) or equivalent

CHEMICAL DOSING SYSTEM Application - Storage of Chemical Solution Type- Vertical Capacity-200 Ltr MOC – HDPE, Make-Sintex DOSING PUMP Application - To dose the Chemical solution (Lime, Alum, Polyelectrolite ) Type- Electronic, Diaphragm Capacity-0-10Lph Pump Make: Edose/ Milton Roy Equivalent or equivalent

TUBE SETTLER MEDIA Length – 750 mm MOC- PVC UV Stabilized

AERATION GRID FOR EQUALIZATION TANK Application - For providing air in Equalization tank MOC –MSFRP Accessories- Complete with piping & valves

COARSE AIR DIFFUSERS FOR EQUALIZATION TANK Application - For providing air in Equalization tank MOC –PVC/PP Type: Coarse

AERATION GRID FOR Aeration tank Application - For providing air in Aeration Tank Accessories- Complete with piping & valves MOC – PVC/UPVC

AIR BLOWER WITH ACCESSORIES Application - Supply of air for mixing Capacity-150 m3/hr x 5MWC MOC – CI, Blower make- Everest / Beta /Santi Motor make- Kirloskar / Crompton Accessories- MS base plate, safety valves, suction filter, silencer, NRV, PRV, ant vibration pad, V belt, Belt guard, Drive and driven pulleys(1W+1S)

AIR DIFFUSERS FOR MBBR TANK -1&2 Application - For providing air in Aeration Tank MOC – PVC/PP Type: Fine

TUBE SETTLER MEDIA FOR TUBE SETTLER-2 Length – 750 mm MOC- PVC UV Stabilized, Make: Cooldeck /Bharat Industries or equivalent

SLUDGE RECYCLING PUMP Cap: 1.0 m3/hrx 10M Head Type: Monoblock Make: Kirloskar or equivalent HP – 0.5

FILTER FEED PUMP Application- To feed the treated sewage to Multigrade filter / backwashing Type- Centrifugal, Monoblock, horizontal , Self priming Capacity- 2.5 m3/hr (1W+1S)

MULTI GRADE FILTER Application – for Removal of fine suspended solids Size – 2.5 m3/hr Media- under bed with graded silica sand ,Crystal type gravels, Anthracite ,Different type of sand MOC – MSEP

ACTIVATED CARBON FILTER Application - Removal of fine suspended solids, Color & Odor Size – 2.5 m3/hr Media- under bed with graded silica sand & Activated carbon MOC – MSEP,

HYPO DOSING TANK Application - Storage of Hypo Solution Type- Vertical Capacity-200 Ltr MOC – HDPE, Make-Sintex DOSING PUMP Application - To dose the Hypo solution Type- Electronic, Diaphragm Capacity-0-10 Lph Pump Make: Edose/Equivalent

INTERCONNECTING PIPING, FITTING & VALVES MOC: MS / GI /PVC / Equivalent Make: UPVC/PVC or equivalent

Sump pump Application- To feed effluent from sump pump to ETP bar screen Type- Centrifugal, Monobloc, horizontal Capacity- 6.0 m3/hr, Head- 10 m, MOC – CI, Make – Kirloskar (1 W+1S) or equivalent

Treated water transfer pump Application- To feed treated water for reuse water Type- Centrifugal, Monobloc, horizontal Capacity- 6.0 m3/hr, Head- 10 m, MOC – CI, Make – Kirloskar (1W+1S) or equivalent

UF FEED PUMP After treated water storage tank. To feed the treated water to MGF and for backwashing Centrifugal, Monobloc 3.0 m3/hr 25 m SS304 Kirloskar Eqvt. Or equivalent 3 Phase, 50 Hz.

ULTRA- FILTERATION MEMBRANE Location After Feed Pump Application To reduce the suspended particle from treated water Housing Material PVDF Filter Element MOC Hollow Fiber Designed flow 2.5 m3/hr. Pore Size 0.07µ MOC of Pipeline UPVC Make DEERFOS/Maan+Hummel /Koch or equivalent

BACK WASH Tank Quantity 1 Nos. Capacity 500 Ltr. Make Sintex / Eqvt. MOC- HDPE

BACK WASH PUMP Location Near UF permeate storage tank Application To feed the water for backwash Operation. Type Centrifugal, Monobloc Capacity- 3.0 m3/hr Head 25 m MOC-CI (1 W+1S)

MICRON BAG FILTER Application- To remove suspended particle up to 50 micron Capacity 2.5 m3/hr. Size 50 µ Make PP/Gopani or equivalent

CEB DOSING PUMP - Application To feed the chemical solution into UF feed line for protection of Membrane Capacity 0 - 10 LPH

CIP SYSTEM Location- Near UF PRODUCT water storage tank. Application To feed the water for chemical cleaning of membranes Type Centrifugal, Monobloc Capacity- 2.0 m3/hr. Head 30 m MOC Stainless Steel – 304

Pressure Gauges Location Delivery line of Pumps, MCF , UF Membrane & Application To Indicate the Pressure Type Bourdon / Diaphragm Range 0 to 7 Kg/ cm2

FLOW INDICATORS – Location At Feed, Permeate & Reject water pipe line Capacity 0 - 6 KLPH Make Flosys/Flow star or equivalent Type Line Mounted

AUTOMATIC/SOLINOID VALVES Quantity 01 Set Disc Material Stainless Steel MOC of Valve Body Stainless Steel Make U-FLOW or equivalent

ELECTRICAL WORKS CONTROL PANEL Control panel will be fabricated in 14 SWG CRCA sheet with non- compartment, dust & vermin proof, machine mounted Make of Switchgears - Siemens / L & T/LS or equivalent

CABLING Electrical cabling shall be provided from control panel to various units of sewage treatment plant Size of cable- As per the capacity of the motors / drives MOC: Copper / Al unarmored Make: CCI / Polycab / Equivalent

Level Switches Location - Inside Tanks Application - To Indicate the low & High level

Bar screen Size -1.0 x 1.0 x 1.0 SWD MOC - MSFRP

Oil and Grease Trap Size -2.0 x 1.0 x 1.5 SWD MOC - MSFRP (4 mm sheet with 2 mm frp)

EQIALIZATION Tank Size 2.0 x 2.5 x 3.0 SWD MSFRP (4 mm sheet with 2 mm frp)

Flash mixer Size 0.5 x 1.0 x 1.0 SWD MSFRP (4 mm sheet with 2 mm frp)

Flocculator Size 0.8 x 1.0 x 1.0 SWD MSFRP (4 mm sheet with 2 mm frp)

Tube settler 1 Size - 1.5 x 2.0 x 3.0 SWD MSFRP (4 mm sheet with 2 mm frp)

Aeration Tank -1 Size - 1.5 x 2.0 x 3.0 SWD MSFRP (4 mm sheet with 2 mm frp)

Tube settler- 2 Size - 1.5 x 2.0 x 3.0 SWD MSFRP (4 mm sheet with 2 mm frp)

Aeration Tank-2 Size -1.0x 2.0 x 3.0 SWD (4 mm sheet with 2 mm frp)

Tube settler 3 Size - 1.5 x 2.0 x 3.0 SWD

Filter Feed cum chlorine contact tank size -1.5 x 2.0 x 3.0 SWD (4 mm sheet with 2 mm frp)

Treated water storage tank Size - 1.5 x 2.0 x 3.0 SWD (4 mm sheet with 2 mm frp)

Sump well size -1.5x2.0x2.0 BCC

Sludge draying bed size - 1.0x1.0x1.0 MOC- BCC

Foundation for Blower/Pumps etc

Supplying, Installation, Testing & Commissioning (SITC) of Scrubber Unit for Exhaust/Ventilation System in Atrium at Fish Mandi, Supplying, installing, testing, and commissioning of a *Scrubber Unit* suitable for an air volume handling capacity of approximately *100,000 cu.ft. per hour* for the atrium ventilation system. The scrubber unit shall be installed *on the periphery of the terrace* adjacent to the atrium, with provision to discharge the scrubbed air through an *OCU (Odour Control Unit) of equivalent capacity. Complete work includes scrubber unit, support framework, interconnections, piping, water circulation system, electrical connections, and controls as per the design intent. Exclusions: which will be part of a separate package. Vertical/Horizontal packed bed scrubber unit, factory fabricated. FRP, PP-FRP, or mild steel with epoxy/polyurethane anti-corrosive coating (minimum 3-layer system), suitable for outdoor weather conditions. Air Handling Capacity:* ~100,000 cu.ft./hr (approx. 2,8300 CFM). Not to exceed 25 mm WG across the scrubber. Heavy duty, direct driven/ belt-driven centrifugal fan, AMCA-certified, with dynamically balanced impeller, appropriate for the air volume and pressure drop. Structured/loose packing of high surface-area PP media (e.g., Pall rings) with minimum surface area of 200 m²/m³. -Mist Eliminator/Demister Pad:* High efficiency, washable PP/FRP demister, minimum 99% efficiency for droplets >5 microns. -Pumps and Circulation:* Corrosion-resistant centrifugal pump suitable for continuous water circulation with minimum 5 hours run back-up. - *Water Distribution System: Non-clogging spray nozzles for uniform water distribution over packing media. -Make:* Axis Terra / equivalent approved make. - To be integrated downstream of scrubber with equal capacity (~100,000 cu.ft./hr). Media: activated carbon / chemical media as per design, in a modular housing. FRP/ powder-coated MS. - Minimum Contact Time (EBCT): 1.0–1.5 seconds. Motor: TEFC squirrel cage induction motor (IP55, Class F insulation) with suitable starter/control panel. Control Panel: Wall/floor mounted, dust and vermin proof, comprising MCCB, contactors, relays, overloads, push button start/stop, indicator lights. Interlock system for fan and pump ensured through panel. Provision for on/off and trip alarms. Installation at designated terrace periphery using structural supports and vibration isolators. - Water inlet/outlet and drain connections to be provided as per site requirement. - Testing and commissioning by OEM authorized personnel. Performance testing to ensure designed flow rate, pressure drop, mist carryover, and odour removal efficiency.- All supplied equipment shall carry manufacturer’s warranty for a minimum of *12 months from commissioning or 18 months from supply*, whichever is earlier. - The contractor shall guarantee performance as per design parameters. - Scrubber Unit: Axis Terra / Zeeco / Thermax / equivalent - Fans/Motors: Nicotra / Kruger / Systemair / equivalent - Pumps: Kirloskar / Grundfos / equivalent Measurement shall be taken as complete one job including supply, installation, testing, and commissioning of the scrubber unit and OCU. upplying Installation Testing and Comissioning of scrubber unit for exhaust/ventilation system for Atrium about 100000 cuft placed on periphery of terrace along the open atrium & discharge the same through OCU unit of same capacity. Initial Estimate as per design. Make Axis Terra/ Equivilant

Supply and Fixing of RKAI OR EQUIVALENT make PreCoated GI Sheet Insect Killer 40 Ltr at Fish Mandi,asperthe scope mentioned below. Supply, transportation, and fixing (installation) of RKAI oe equvalaent PreCoated GI Sheet Insect Killer, capacity 40 liters, complete in all respects at the designated location at Fish Mandi, Includes all mounting hardware, electrical connections, and commissioning for full functional operation. The work shall ensure a fully operational unit with UV tubes and effective insect killing function as per manufacturer specifications. All materials, labor, tools, and equipment necessary for satisfactory completion of the job shall be included.- *Make:* RKAI or approved equivalent. PreCoated Galvanized Iron (GI) Sheet body, corrosion resistant finishing suitable for indoor/outdoor use. Capacity:* 40 liters. Mounting Type:* Wall mounted with secure mounting brackets. UV Tubes:* Minimum 2 UV tubes, 18 watts each, with on/off rocker switch. Insect Collection:* Removable collection tray for easy cleaning. - *Operation:* Effective insect killing using UV light attraction and electric grid. - *Power Supply:* Suitable for 230V AC, 50Hz, single phase supply. - *Safety Features:* Proper insulation, protective grills to prevent accidental contact with electric grid. Complete wiring from unit point to nearest power source with suitable protective devices.All electrical connections to comply with applicable local electrical safety standards. Testing for electrical continuity, insulation resistance, and operational checks on UV tubes and electric grid. Proper mounting on wall at designated locations ensuring accessibility for maintenance. Connection to power supply with secure and safe wiring. Commissioning to verify light operation, insect killing efficiency, and removal of collected insects. Demonstration to client/user post installation for satisfactory operation.Minimum 12 months warranty from date of commissioning against any manufacturing defects or operational failures.Vendor to provide service support for maintenance during warranty period. RKAI (Rajnish KR Insect Appliances Industries) preferred. Equivalent makes with proven quality and approval of purchaser considered. Payment will be based on total number of units supplied, installed, tested, and commissioned satisfactorily. Rate to include all materials, labor, equipment, testing, commissioning, and warranty compliance.

Supply, installation & fixing of 127 mm thickness PUF panels for construction of 01 Freezer Rooms each of Size: (13000 x 6000 x 3000 mm) (operating temperature: -200C). insulation material shall be CFC free PUF with close cell content of not less than 95%. The foam is injected using high pressure equipment in a precise ratio & proportional for auto cohesively lamination. Outer skin of PUF panels be of 0.50 mm thickness PPGI sheet & inner skin be of 0.50 mm thickness stainless-steel 304 grade sheet. PUF panel system be satisfactory type tested for fire properties, self-extinguishing as per IS-11239, confirm to class-1 surface spread of flame as per BS476 part-7 confirm to classified as “Not easily ignitable” as per BS476 part 5 to facilitate easy & systematically assembly / disassembly, panel to panel joint be cam lock. Density of PUF: 40 kg/m3 (+ 2 kg) complete along with bottom channels & flashing shall be made from 0.50 mm thick PPGI sheet & 0.50 mm thick stainless steel 304 grade sheet for application at respective areas. For all inner surface flashings shall be used made from stainless steel 304 grade sheet. (Make: Blue Star)

Supply, installation & fixing of floor insulation for 01 no Freezer Room with insulation material-100 mm thickness PUF slab (in 2 layers of 50 mm each), vapour barrier, inclusive of all accessories as per specification: (Make: Blue Star) a) Insulation material-PUF slab b) Density: 40 Kg/M3 (+ 2 Kg) c) No of layers: 2 layers (50 mm each) d) Total thickness: 100 mm e) Vapor barrier: Tarfelt, polythene sheet. f) Puff slabs shall be applied over cleaned surface of PCC duly primmed. All joints of PUF slabs shall be sealed with hot bitumen & on top of insulation one layer of tarfelt type 3 grade 2 shall be applied prior to RCC finished floor.

Supply, installation & fixing of Hinge Door 125 mm PUF insulation (Density: 45 Kg/M3) with both sides stainless steel sheet of 304 grade having 0.6mm thickness for negative temperature application up to -280C, wall frame (Density: 65 Kg/M3) with thermal gasket, rising hinges, door opener, EPDM gasket, cladding, Heating cables, rising hinges & other accessories Door Size: (1030 mm X 2000 mm), clear opening. (Make: Blue Star) or equivalent.

Supply, installation & commissioning of evaporator unit (Make: Blue Star) or equivalent for 01 freezer room having following specifications: a) Cooling capacity: 24000 BTU b) Refrigerant: R404A c) Evaporator Temp: -250C d) Air inlet: -170C e) Condensing temp: 510C f) Airflow (m3/hr): 11700 g) Air throw (m): 13 h) No of fans: 02 of size: 800 mm diameter i) MOC of tubes: Copper j) MOC of fins: Aluminium k) Casing: 304 SS l) Electric defrosting m) Coil heater power watt: 1750 n) Drain tray heater power watt: 650

Supply, installation & commissioning of condensing unit (Make: Blue Star) for 01 freezer room having following specifications: a) Condensing unit type: Air cooled b) Refrigerant: R404A c) Evaporating SST: -250C d) Condensing SDT: 50.70C e) Condensing unit Air Flow: 4600 CMH f) Compressor type: Single stage semi-hermetic reciprocating type g) Cooling capacity: 24000 BTU h) Power input: 6.980 Watts i) Axial fan: 450 mm Dia X 2 no j) Oil separator: Temprite / Emerson-Make k) Liquid receiver, solenoid valve & other related accessories.

30 KVA oil Cooled Servo Power Input 415/3Ph Range 280 Watts to 470 Watts

Supply of Plastic pallet injection moulded of size: 1200 x 1000 x 160 mm with 4-way entry HDPE 100% virgin material (Make: Supreme / Nilkamal). Or equivalent

Supply of plastic crates of outer dimensions: 600 x 450 x 315 mm (76 Ltr capacity) for storage of fish, made of HDPE 100% virgin material. (Make: Supreme / Nilkamal) or equivalent

Supply, installation, testing & commissioning of factory fabricated floor model PLC control panel with Human Machine Interface for control of all 01 - freezer room with bottom & top cable entries. The control panel shall be fabricated with CRCA sheet duly powder coated rust proof painted. Details are listed below: a) 10” TFT touch screen b) Display size: 10” diagonal c) Backlight: LED d) Programming method: windows-based software for HMI configuration. e) Power supply voltage: 24V DC f) Ethernet / serial communication g) Address mapping h) Multiple communication protocols i) Alarms, calendar, real time clock. j) Compact PLC with built-in HMI k) RS485 based communication with MODBUS RTU protocol. l) Complete along with suitable rating of MCCB.

Supply & installation of hand pallet truck with 2500 Kg lifting capacity as details listed below: a) Fork length (mm): 1150 b) Fork width (mm): 160 c) Lift height (mm): 200

Supplying Installation Testing and Comissioning of AIR Cooled & Inverter Based Variable Refriferant Flow Modular Type VRF unit with 20HP outdoor unit, 4 way cassette units with cordless remote and panels of 3.2 TR/ 4.0 TR/ 4.8 TR. Providong of Y joints for indoor and outdoor. VRF IDU's 1 way / 360 / 4 way. Transportation lifting shifting and handling of Units. Interconnecting refrigirant pipe work suitable for R410a refrigerant with closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor unitsas per specifications & following size of manufactures & properly supported with MS Hanger & clamps. Copper Pipe- Mandev/ Mexflo/ rajco insuation: K flex. Providing and fixing control cum transmission wiring of 2 crore x 0.75 sqm. P/F 32mm rigid PVC piping complete with fittings support and floor trap and duly insulated with 6 mm thick closed cell nitrile rubber insulation. Experience/Office Building.

Operation of freezer room (Cold room) - 10 Ton for 01 year with atleast following staff/operator: Electrician(Operators) 03 no. (For 1st Year)

Operation of freezer room (Cold room) - 10 Ton for 01 year with atleast following staff/operator: Electrician(Operators) 03 no. (For 2nd Year)

Operation of freezer room (Cold room) - 10 Ton for 01 year with atleast following staff/operator: Electrician(Operators) 03 no. (For 3rd Year)

Operation of ETP 45 KLD with supply of all required material such as line alum & poly etc for 01 year with atleast 3 Nos. staff/operator: (For 1st Year)

Operation of ETP 45 KLD with supply of all required material such as line alum & poly etc for 01 year with atleast 3 Nos. staff/operator: (For 2nd Year)

Operation of ETP 45 KLD with supply of all required material such as line alum & poly etc for 01 year with atleast 3 Nos. staff/operator: (For 3rd Year)

Providing fixing and installation of illuminated glass with light and iron frame work and Signage work Shop (200*400) MM

Buildings (300*900) MM

Toilets (200*450) MM

Generator (300*600) MM

Entry/ exit (400*800)MM

Fire Escape (300*650) MM

Way find signage (300*650) MM

Experience building (300*600) MM

Individuals (200*450) MM

Solid Waste Management – Fish Mandi Mall (Approx. 1,00,000 sq.ft) 1. Waste Generation Estimate Fish mandi (wet waste + packaging) - 1.5–2 tons/day Commercial shops & food court - 0.5–1.0 tons/day Visitors + common areas - 0.2–0.5 tons/day Total Expected Waste = ~2.5–3.5 tons/day (60–70% wet waste, 20–25% dry recyclables, 5–10% rejects/inerts) 2. Specifications & Provisions A. Segregation at Source 3-bin system (green – wet, blue – dry, black – rejects). Each shop/stall provided with 40–60L bins. Common areas with 120L/240L HDPE wheeled bins. B. Collection & Transfer Covered pushcarts/trolleys for floor-level collection. Service shafts/lifts for moving bins to ground floor SWM area. Daily clearance with log register. C. Waste Storage & Processing Zone (Min. 2000–2500 sq.ft) RCC flooring, washable tiles, drain & odor control. Mechanical ventilation + exhaust fans + bio-filters. Segregated chambers: Wet waste: to on site composting/biogas. Dry waste: baling & storage room. Hazardous: separate lockable store. D. Onsite Processing Facilities 1. Organic Waste Composter (OWC) – 2 TPD capacity with shredder + curing racks. OR 2. Biogas Plant (prefabricated, 2 TPD) – generates ~100 m³ biogas/day for canteen use. (For fish mandi, biogas with odor control is preferable). E. Ancillary Provisions Wastewater from cleaning routed to effluent treatment / STP. Fly/mosquito control measures. Ventilated storage of recyclables. Compliance with CPCB / SWM Rules 2016. Segregation Bins (HDPE, 60L) High-density polyethylene (HDPE) bins for segregating waste at source into wet, dry, and reject categories. Each bin holds 60L. Lids for each bin to ensure containment of waste and prevent spillage. Different colored lids for easy identification of waste types (green for wet, blue for dry, black for rejects). HDPE material for durability, resistance to chemicals, and ease of cleaning. Costs associated with transporting, positioning, and setting up the bins at each stall or shop.

Wheeled Bins (240L) Heavy-duty wheeled bins made from HDPE, with a 240L capacity for collecting and storing segregated waste. Robust wheels and axles for easy mobility even when filled with waste. Lockable lids for each bin to prevent unauthorized access and control odor. Handles for easy movement and positioning of the wheeled bins. HDPE material for strength, ease of cleaning, and long-term durability. Costs associated with transporting, positioning, and setting up the bins at common areas of the mall.

Collection Trolleys (SS/covered) Stainless steel trolleys, covered to prevent waste spillage and contamination, used for moving segregated waste. Heavy-duty wheels for ease of movement through the mall and waste processing areas. Ergonomically designed handles for ease of pushing and pulling the trolleys. High-quality stainless steel (Grade 204) for durability, hygiene, and easy cleaning. High-quality plastic or metal covers to secure the waste inside the trolley and prevent spills. Costs for moving and placing the collection trolleys in designated collection areas.

Mechanical Ventilation & Odor Control with 1.) 5-6 High-efficiency exhaust fans for ventilating waste processing areas, ensuring airflow and removal of contaminants 2.) 4-5 litres Bio-filters to treat air and remove odors from the waste processing area. 3.) 100-150 meters Ducting and piping for ventilation system, connecting exhaust fans and bio-filters to ensure proper circulation. 4.) Wiring, electrical connections, and control panels for operating the fans and bio-filters 5.) Provision for routine maintenance of the system (e.g., filter replacement, fan servicing).

Biogas Plant (2 TPD, prefabricated) with 1.) 1 plant of fully prefabricated biogas plant designed to process 2 tons per day (TPD) of organic waste with odor control measures. 2.) 1 set Shredder for breaking down organic waste before processing, and a dewatering machine to remove excess moisture. 3.) 2-3 Tanks of Storage tanks or containers for collecting and storing the produced biogas (~100 m³/day). 4.) Equipment to clean and purify the biogas to make it suitable for canteen use or other purposes. 5.) 1 set of System for monitoring gas production, pressure, and flow rates, along with alarms and safety systems. 6.) Costs associated with installation, setup, and commissioning of the plant.

Shredder + Dewatering Machine with 1.) 1 High capacity shredder for for breaking down organic waste into smaller particles before further processing. 2.) 1 machine to separate liquid waste from solid organic material to aid in the processing and storage of solid waste. 3.) Electrical components to power and control the shredder and dewatering machine. 4.) Installation of both machines and necessary setup of electrical and mechanical systems.

Curing Bins / Storage Racks with 1.) Bins made from durable materials for storing and curing wet organic waste, ensuring proper decomposition. 2.) 5-10 racks for storing segregated dry recyclables, ensuring organization and easy access. 3.) Steel, plastic, or other durable materials for the bins and racks. 4.) Spare parts and maintenance tools for ensuring continuous operation of curing bins and racks.

Baler for Dry Waste with 1.) 1 Baler High-efficiency baler for compressing dry recyclables into compact bundles for storage and transportation. 2.) 1 Hydraulic press for providing the necessary pressure to compact recyclables. 3.) Control system for operating the baler, including automatic functions for starting, stopping, and adjusting pressure. 4.) Safety features such as emergency stop buttons, overload protection, and monitoring systems. 5.) Setup, installation, and commissioning costs for the baler and associated systems.

Misc. for plumbing, electrical and drainage with 1.) Installation of plumbing for water supply and wastewater disposal, including pipes, faucets, and drainage. 2.) Wiring and control panels for the waste processing equipment, lighting, and other electrical needs. 3.) Drainage for wet waste and leachate management, ensuring proper flow and treatment of wastewater. 4.) Installation of backup generators or UPS systems for critical waste management functions. 5.) Installation of fire extinguishers, safety signs, and alarms.

Pest Control Setup with 1.) Installation of systems to prevent pests in waste areas (including traps, barriers, etc.). 2.) Regular chemical treatments to prevent and manage pest infestations. 3.) Rodent traps and a monitoring system to ensure pest control effectiveness. 4.) Ongoing maintenance and monitoring to ensure the pest control system operates effectively.

Operation and maintainance including manpower and consumables for 12 months

EXTRA SLUDGE DRYING BED FOR WASTE MANAGEMENT OF ETP Sludge draying bed size - 1.0x1.0x1.0 MOC- BCC

EXTRA SLUDGE DRYING BED FOR WASTE MANAGEMENT OF ETP SLUDGE RECYCLING PUMP Cap: 1.0 m3/hrx 10M Head Type: Monoblock Make: Kirloskar or equivalent HP – 0.5