PWD/BWN/Rs.42.84 lacs/ New Furniture required for Judicial Court Complex Tosham for 4 Nos. Courts

Amount

ANSI / BIFMA/X5.1 compliant chair High back main chair in leather with aluminium base,synchro 4 mechanism and Pu Casters All Dim in MM with open tolerance of +/- 10mm BACKREST: The back is made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood and 37mm thick, 32 Density U foam upholstered with Leather. The back ply and foam is designed with contoured lumber support for achieving comfortable seating posture. High Back (HB) 790mm (H) X 550mm (W). The backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg as per ANSI / BIFMA X5.1. SEAT : The seat is made up of 12mm thick (7 layers) hot pressed plywood and moluded seat foam upholstered with leathere Seat Size 510mm (W) X490mm (D). The seat tested for 1,00,000 cycles to be completed with a load of 57kg impact force on the seat as per ANSI / BIFMA X5.1. Seat foam made out of moulded Polyurethane foam with the following properties : • Density: 50-60 Kg/m3, • Hardness: 15-20Kgf, • Compression set: 50% 10Max, • Tensile strength: 0.9-1.2 Kg/cm2, • Tear strength(Min): 2.2 N/cm, • Resilience: 50% - 60%, • Comfort / Indentation Factor: 2Min 2D ARM REST : The armrests made of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm thick M.S. insert. Arm pad size 248mm (L) x 92mm (W). The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 6mm thick, HR steel. Arm rest to be height adjustable up to 70mm & left and right. Arm rest tested for 60,000 Cycles to be completed with load of 40Kg as per ANSI / BIFMA X5.1. MECHANISM : FOUR POINT SYNCHRO MECHANISM : Mechanism with two lever control for four level locking and seat height adjustment. Mechanism made out of MS Plate thickness is 3mm and seat is tilting angle is 0°~6°. and back tilting angle is 89°~109°. Also it has the back tension adjustment knob. Mechanism tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1. GAS LIFT : Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift tested for 1, 00,000 Cycles as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 4 and all applicable ANSI/BIFMA, EN performance standard BASE : ALUMINIUM BASE : The base made up of pressure die casted in aluminium fitted with 5Nos twin wheel castors. The base is 650mm pitch circle dimeter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1. CASTERS : PU CASTORS : The twin wheel castors are injection mouled in nylon and over moulded in polyurethane. Diameter of Castor 60 mm. The castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1. Very high Back Chair. Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Main table :- 1800 (W) x 900(D) x 740 (H); Side Table :- 1050 x 450 x 740mm & Pedestal 1D1F.Providing & fixing cabin table where table top is made of 43mm thick prelaminated Particle board from the visible side. The user side is of 25mm thick prelam particle board. All exposed edges have 2mm PVC edge banding.Modesty panel: - The Modesty has a prismatic shape and is made of 18mm thick prelam Particle Board. All exposed edges have 2mm PVC edge banding. The colour of the modesty is matching to the table top colour along with a designer Slate Grey prismatic back.Understructure :- The understructure is made of 43mm thick prelaminated Particle board from the visible side. The user side is of 25mm thick prelam particle board. All exposed edges have 2mm PVC edge banding.The table does not have any provision for mounting switches. Patneted squeeze can be provided for wire management. All switches and mounting provision to be provided on the adjacent wall.Side Table :- The table top is made of 25mm thick prelam particle board. All exposed edges have 2mm PVC edge banding. The Table top colour is matching to the main table.Modesty panel: - The Modesty is made of 18mm thick prelam Particle Board. All exposed edges have 2mm PVC edge banding. The colour of the modesty is matching to the table top colour.Understructure :- The understructure is made of 25mm thick prelaminated Particle board. All exposed edges have 2mm PVC edge banding.The Pedestal Unit of Dimensions 400W x 470D x 545mmH is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the two drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the drawers. Table with side unit (For Chambers) Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather/leatherette/fabric and moulded polyurethane foam. The back shall be designed with contoured shape for extra comfort and made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood and 37mm thick, 32 Density U foam. Size of back shall be (W)-55.0 cm, (H)-54.5 cm & size of seat shall be (W)-51.0cm x (D)-49.0 cm. PU foam should be used in making seat which shall be moulded with density 55 +/- 5 kg/m ³ and hardness load 15-20 kgf for 50% compression.The armrests should made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with M.S insert. . The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of HR steel.The Visitor Understructure made up of ERW tube Dia 25.4mm and Thickness 2mm. Overall dimensions of Chair shall be, Width of Chair - 54.0cm, Depth of Chair - 55.0 cm as measured from pedestal below. Height from ground - min 97.5 cm. Seat height - min 43.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. Visitor Chairs for Chambers Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Providing and fixing (3+1+1) sofa,the seat , armrest & backrest assembly shall consists of a Pine understructure with plywood frame consisting layers of foam with wadding. The complete assembly shall be covered with Leatherette upholstery . Providing and installing as per three seater sofa with SIZE : 2065(W) X 850(D) X 760(H) & single seater sofa with SIZE : 990(W) X 850(D) X 760(H). Inner solid Frame structure made of high quality wood. The wood is kiln chemical treated tropical Meranti wood. The legs are made of rubberwood having melamine matt finish. The seat cushion is made of 7 inches multi layered foam of density 32D 23D 32D and HD with polyester polyfill outer layer of 180 gsm. The polyester polyfill keeps the upholstery wrinke free and soft. The seating cushions have 3 inches of elastic webbing of 350 gsm with diagonal weave. The thread used is nylon bonded to provide lasting stitch strength.Backrest: 2" elastic webbing (250 gsm) with diagonal Weave and 3" foam (23D) with Polyester polyfill outer layer (180 gsm). Outer finish: Stained solid wooden legs superior quality. Frame construction: Kiln seasoned mixed Meranti solid tropical hard woodSEAT Webbing: 3" diagonal pattern webbingFoam: 7" Multilayered foams Having 4" of High Resilience-HD Foam and 3" of HD virgin PU Foam.BACKREST: Webbing 2" elastic webbing Foam: 18D PU foamUpholstery: Semi PU with layer of polyester polywaddingStitiching: Nylon Bonded threadGlue: Sp4 from PidiliteLegs: Solid kiln seasoned and treated Solid wood with Melamine Matt Finish. Sofa Set 5 Seater (3+1+1) Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Providing & fixing centre table 1200x750x450 with MS understructuremade of Glass Top of 10mm toughened glass. There should be glass shelf below the glass top. Understructure should be made of MS powder coated legs. Central Table Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Providing & fixing corner table 600x600x450 with MS understructure made of Glass Top of 10mm toughened glass. There should be glass shelf below the glass top. Understructure should be made of MS powder coated legs. Corner table / side table Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Providing & fixing medium back chairs with fix armrest, upholstered with fabric. All Dim in MM with open tolerance of +/- 10mm and ANSI / BIFMA/X5.1 compliant chairBACKREST : The back is made up of 12mm thick (7 layers) hot pressed plywood and moluded back foam upholstered with Fabric. The back ply and foam is designed with contoured lumber support for achieving comfortable seating posture. Back rest size - Medium Back (MB) 620mm (H) X 500mm (W). The backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg as per ANSI / BIFMA X5.1.SEAT : The seat is made up of 12mm thick (7 layers) hot pressed plywood and moluded seat foam upholstered with Fabric. Seat Size 490mm (W) X 500mm (D). The seat tested for 1,00,000 cycles to be completed with a load of 57kg impact force on the seat as per ANSI / BIFMA X5.1.BACK AND SEAT FOAM : Foam made out of moulded Polyurethane foam with the following properties : • Density: 50-60 Kg/m3, • Hardness: 15-20Kgf, • Compression set: 50% 10Max, • Tensile strength: 0.9-1.2 Kg/cm2, • Tear strength(Min): 2.2 N/cm, • Resilience: 50% - 60%, • Comfort / Indentation Factor: 2Min, ARM REST : Fixed ARM : The armrests made up of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm thick M.S. insert. Arm rest tested for 60,000 Cycles to be completed with load of 40Kg as per ANSI / BIFMA X5.1.MECHANISM: SINGLE POINT LOCK : Conventional mechanism with one lever control for lock and seat height adjustment. Mechanism made out of MS Plate thickness is 3mm and seat is tilting angle is 3°~10°. and back tilting angle is 87°~106°. Also it has the back tension adjustment knob. Mechanism tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1.GAS LIFT : Class 4 Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift tested for 1, 00,000 Cycles as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 4 and all applicable ANSI/BIFMA, EN performance standardBASE : NYLON BASE : The base made up of injection moulded in black glass filled nylon and fitted with 5Nos twin wheel castors. The base shall be 640mm pitch circle dimeter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1.CASTERS : NYLON CASTORS : The twin wheel castors are injection mouled in nylon and diameter of Castor 50 mm. The castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1. Mid back chair for reader Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Supplying & installing table made up of Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Top is in 25mm thk baord with 2mm PVC edge banding supported on 25mm thk. Gable ends and 18mm thk. Modesty panel. Exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables shall be made by user. Wire routing / wire management groumets shall be provided on main or side table as specified. Metal Keyborad tray 19" shall be provided along with table. Computer table for Ahimad / Steno / Reader Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

It shall have an overall size of 900 L x 450 D x 2015 H with knock-down construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). There shall be 5 loading levels. Bookcase 4 drawer Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

The Storage System is a Welded Storage with 2 Swing Doors made up of CRCA Material. The overall dimensions of Storage is H 1980mm x W 900mm x D 450mm. with 4 fixed shelves making 5 compartments.The storage has equally divided fixed 4 nos shelves with 5 loading levels.The welded carcass of the Storage is made up of 0.8mm thick CRCA duly powder coated to standard Siemens Grey Powder Coating finishes. The Swing Door is made from CRCA Sheet of thickness 1.2mm thick CRCA duly powder coated to standard Siemens Grey Powder Coating finishes. Steel Almirah . Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Providing & fixing medium back chairs with fix armrest, upholstered with fabric. All Dim in MM with open tolerance of +/- 10mm and ANSI / BIFMA/X5.1 compliant chairBACKREST : The back is made up of 12mm thick (7 layers) hot pressed plywood and moluded back foam upholstered with Fabric. The back ply and foam is designed with contoured lumber support for achieving comfortable seating posture. Back rest size - Medium Back (MB) 620mm (H) X 500mm (W). The backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg as per ANSI / BIFMA X5.1.SEAT : The seat is made up of 12mm thick (7 layers) hot pressed plywood and moluded seat foam upholstered with Fabric. Seat Size 490mm (W) X 500mm (D). The seat tested for 1,00,000 cycles to be completed with a load of 57kg impact force on the seat as per ANSI / BIFMA X5.1.BACK AND SEAT FOAM : Foam made out of moulded Polyurethane foam with the following properties : • Density: 50-60 Kg/m3, • Hardness: 15-20Kgf, • Compression set: 50% 10Max, • Tensile strength: 0.9-1.2 Kg/cm2, • Tear strength(Min): 2.2 N/cm, • Resilience: 50% - 60%, • Comfort / Indentation Factor: 2Min, ARM REST : Fixed ARM : The armrests made up of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm thick M.S. insert. Arm rest tested for 60,000 Cycles to be completed with load of 40Kg as per ANSI / BIFMA X5.1.MECHANISM: SINGLE POINT LOCK : Conventional mechanism with one lever control for lock and seat height adjustment. Mechanism made out of MS Plate thickness is 3mm and seat is tilting angle is 3°~10°. and back tilting angle is 87°~106°. Also it has the back tension adjustment knob. Mechanism tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1.GAS LIFT : Class 4 Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift tested for 1, 00,000 Cycles as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 4 and all applicable ANSI/BIFMA, EN performance standardBASE : NYLON BASE : The base made up of injection moulded in black glass filled nylon and fitted with 5Nos twin wheel castors. The base shall be 640mm pitch circle dimeter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1.CASTERS : NYLON CASTORS : The twin wheel castors are injection mouled in nylon and diameter of Castor 50 mm. The castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1. Revolving Chairs for reader / Steno/ Ahimads Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50.0cm(W) x 47 cm(H).The armrests should be integrated with the understructure. The cantilever understructure made up of Dia 25.4mm, 2mm thk ERW tube and finished with Black Powder coat. Overall dimensions of Chair shall be, Width of Chair - 55cm, Depth of Chair - 55 cm as measured from base below. Height 92 cm. Seat height -45 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. Cane Chair Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Table Top made of 25mm thick prelam particle board confirming to IS 12823 Interior Grade with the exposed edges sealed with 2mm PVC edge banding. The height of the table top from the ground should be 740mm. supported on the legs and beams. Legs are made of 50 x 50mm thick Square pipe made of 1.6mm thick CRCA pipe duly powder coated interconnected with tie member of 80 x 40mm pipe structure made of 1.6mm thick CRCA duly powder coated confirming to IS 7138. The powder coating thickness considered is 50 to 60 microns DFT. Structure to fully welded with all arc welding from inside eliminating manual finishing. The leg shoe is made up of 100% recyclable nylon 6. The shoe helps in mounting of levellers on the legs by eliminating any welding process. The levellers are made of Nylon 6 with M8 bolts insert moulded to take care of any floor undulation. Beam is made of 1.2mm thick CRCA bent in the form of C channels with 3mm thick CRCA brackets. The bottom cover is made of 0.7 mm thick GI sheet. The Pedestal Unit of Dimensions 400W x 470D x 545mmH is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the two drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the drawers. Table for Ahimads (5*3) Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Providing and installation of 15 seater meeting table where table top shall be made of 25mm Thick prelam Top with Provision of access flap for Data and Power connectivity on top surface,mounted on curved Shaped gable end of 25mm thickness. Table Top :- 25mm thick Curved Edge Table Top made up of 25mm thick particle board confirming to IS:12823 standard. Understurcture: 25 mm thick prelaminated particle board confirming to IS:12823 grade with 2 mm PVC edge banding. Modesty :- Modesty Panel of lighter shade made up of 18mm thick Pre-laminated Particle board confirming to IS:12823 providing stability to structure and allow sufficient leg privacy to user. Wire Management :- Provision for wire pasing throughout the structure without mixing data and power connections. the wires can be pull inside the tabel from floor. Access flap -Single side and double side openable patented DUO. Power-data-voice switchesare mounted on a modular switch plate. Conference table 15 seater for Advocated (15*3). Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Providing & fixing medium back chair where cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly.Fixed Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size 16 cm (W) x 9 cm (H) at fixed position Size of back shall be (W)-55cm, (H)-58.0cm & size of seat shall be (W)-50 cm x (D)-44.0cm. Armrest has option of height adjustment . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro 1 mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in nylon . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 102.5 to max 111.5 cm. Seat height - min 44.5 cm to max 53.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. Medium Back Chairs revolving for meeting Hall Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Supply and Placement of personal locker units which shall have an overall size of 380 L x 457 D x 1830 H with knock-down construction. It should be made of .6mm & .8mm thick CRCA sheet. It should have a 4 locker compartments which shall have a Uniformly Distributed Load Capacity shelf of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). There shall be 4 compartments and no. of total vertical locker units should be 3. Almirah with 12 lockers for P.S. Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Table Top made of 25mm thick prelam particle board confirming to IS 12823 Interior Grade with the exposed edges sealed with 2mm PVC edge banding. The height of the table top from the ground should be 740mm. supported on the legs and beams. Legs are made of 50 x 50mm thick Square pipe made of 1.6mm thick CRCA pipe duly powder coated interconnected with tie member of 80 x 40mm pipe structure made of 1.6mm thick CRCA duly powder coated confirming to IS 7138. The powder coating thickness considered is 50 to 60 microns DFT. Structure to fully welded with all arc welding from inside eliminating manual finishing. The leg shoe is made up of 100% recyclable nylon 6. The shoe helps in mounting of levellers on the legs by eliminating any welding process. The levellers are made of Nylon 6 with M8 bolts insert moulded to take care of any floor undulation. Beam is made of 1.2mm thick CRCA bent in the form of C channels with 3mm thick CRCA brackets. The bottom cover is made of 0.7 mm thick GI sheet. Table for Ahlmads (2.5" *2.5") Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Supplying and Placing Table of size 1500 Width x 750 Depth x 740 Height with return unit 1050x450x740mm. The top is made from 25 mm thick pre- laminated board. All the edges are sealed with 2 mm thick PVC edge band all around. Side panels are made of 25 mm thick pre- laminated particle board. All the edges are sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side. Modesty panel shall be made from 18 mm thick pre- laminated particle board confirming to IS:12823 grade. All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement. The drawers are provided with suitable slides for smooth operation. All the pedestal drawers are centrally locked with a single key. Laminate as per approval prior to procurement.The Pedestal Unit of Dimensions 400W x 470D x 675mmH is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 2 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 3 drawers. Table for lawyer court room for local Commissioner. Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Cross beam and Leg shall be powder coated made of cold rolled steelwith 0.2 ± 0.01 cm thickness. Seat-Back shell shall be 1.2 mm thk powder-coated perforated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness. The Side Bar shall be made of powder-coated solid steel with inserts. The Shell shall be assembled on the Cross Beam with help of bolts . Seat width- 54.5 cm per seat. Thickness of side bars is 4.5cm & gap between seats is 2cm. Overall Dimensions shall be Seat Height - 40.6 cm, Height - 77.5cm, Width & Depth of Chair as measured from ground - Width-176.5 cm and Depth-71 cm.Dimensions tolerance / variations shall be within +/- 1 cm. 3 seater Bench (Steel). Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Table Top made of 25mm thick prelam particle board confirming to IS 12823 Interior Grade with the exposed edges sealed with 2mm PVC edge banding. The height of the table top from the ground should be 740mm. supported on the legs and beams. Legs are made of 50 x 50mm thick Square pipe made of 1.6mm thick CRCA pipe duly powder coated interconnected with tie member of 80 x 40mm pipe structure made of 1.6mm thick CRCA duly powder coated confirming to IS 7138. The size of the beam is 100mm height and depth of 445mm for sharing. The powder coating thickness considered is 50 to 60 microns DFT. Structure to fully welded with all arc welding from inside eliminating manual finishing. . The leg shoe is made up of 100% recyclable nylon 6. The shoe helps in mounting of levellers on the legs by eliminating any welding process. The levellers are made of Nylon 6 with M8 bolts insert moulded to take care of any floor undulation. Beam is made of 1.2mm thick CRCA bent in the form of C channels with 3mm thick CRCA brackets. The bottom cover is made of 0.7 mm thick GI sheet. The Pedestal Unit of Dimensions 400W x 470D x 545mmH is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the two drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the drawers. Tables for Naib Court. Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50.0cm(W) x 47 cm(H).The armrests should be integrated with the understructure. The cantilever understructure made up of Dia 25.4mm, 2mm thk ERW tube and finished with Black Powder coat. Overall dimensions of Chair shall be, Width of Chair - 55cm, Depth of Chair - 55 cm as measured from base below. Height 92 cm. Seat height -45 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. Cane Chairs for Naib Court Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Footrest Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Providing and placing of Slotted angle rack of overall height 1800Hx457Dx900W angle shall be take the load put on the panels (Horizontals) Four independent slotted angles of suitable size are provided. Size of the MF Angles is 40mm x 40mm x 1.8 mm. Pitch of the holes on the flanges is 19.05mm to provide flexibility of adjusting the loading levels. It is designed to take a load of 80 Kg UDL per level. Corner plates: Corner plates are provided in the front, inner back and outer back of the rack. There are 4 corner plates in each of these sides i.e. Front side and back side. Nuts and bolts All the nuts and bolts are electro galvanized. Pretreatment and Final Finish of the System: All mild steel components unless otherwise specified shall be powder coated for obtaining a smooth, scratch resistant and lasting attractive finish. The Dry Film Thickness (DFT) after powder coating is average 35 microns. Iron rack for Record room Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Wardrobe Almirah With wardrobe & Locker (steel). Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Wardrobe Almirah With Locker for Nazir (Steel). Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

Providing and placing of Slotted angle rack of overall height 1800Hx457Dx900W angle shall be take the load put on the panels(Horizontals) Four independent slotted angles of suitable size are provided. Size of the MF Angles is 40mm x 40mm x 1.8 mm. Pitch of the holes on the flanges is 19.05mm to provide flexibility of adjusting the loading levels. It is designed to take a load of 80 Kg UDL per level. Corner plates: Corner plates are provided in the front, inner back and outer back of the rack. There are 4 corner plates in each of these sides i.e. Front side and back side. Nuts and bolts All the nuts and bolts are electro galvanized. Pretreatment and Final Finish of the System: All mild steel components unless otherwise specified shall be powder coated for obtaining a smooth, scratch resistant and lasting attractive finish. The Dry Film Thickness (DFT) after powder coating is average 35 microns. Side Rack Steel. Note:- The furniture shall be of approved make such as Godrej, Wipro, Methodex, Space Wood, Geeken.

MEGA ENTERPRISES

METHODEX SYSTEMS LIMITED