Reconstruction of Khudimari Dumardaha Kalahat Binnachara Road at 7th Km 8th Km Ch. 0.00 m to Ch. 1000.00 m under NDRF PDNA-2022 for the year 2025 26

Amount

Road Works

Clearing and grubbing road land including uprooting wild vegitation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal unserviceable materils and stacking the serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exeeding 150mm in thickness as per Technical Specification Clause 201. (i) By Manual Means. (A) In area of non throny jungle.

Construction of embankment with approved materials obtained from borrow pits with a lift upto 1.50 m , transporting to site, spreading grading to rquired slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead up to 1000m as per Technical specification clause 301.5 i) Private land.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead up to 1000m as per technical Specification clause 303.1. (i) Private land

Construction of granular sub-base by providing well graded material,spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification Cls 401. II) For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone sreening/ binding materials to fill up the intersticses of course aggregate, watering and compacting to the required density grading III as per Technical Specification Clause 405. (A) By Manual Means.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone sreening/ binding materials to fill up the intersticses of course aggregate, watering and compacting to the required density grading II as per Technical Specification Clause 405. (A) By Manual Means.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical specification Clause 502.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bit i f l d ith H d li b T h i lS ifi ti sqm 11.80 bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. Qnty. = 1 x 500 x 3.75 = 1875.00 Sqm

20mm thick Open-Graded Premix Carpet using Bituminous (penetration. Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.grade/modified bitumen) Binder. Case - I: By Manual Means i) Bitumen (S-90)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. By Manual Means Case - I : Type A (i) Bitumen (S-90)

Inter Locking Concrete Block Pavement. Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504 complete including carriage a) Including edge block/Edge restraints

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface.Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Kilometre Stone. Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (ii) Ordinary Kilometer Stone (Precast)

Kilometre Stone. Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (iii) 200 m stone (precast)

RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top,curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed (b) 15 cm dia. RCC guard post with reinforcement of 4nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c.

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting,1.5 mm thick supported on a mild steel angle iron posts 75 mm x 75mm x 6mm, firmly fixed to the ground by means of properly designed foundation with M- 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 801. (iv) 800mmx 60mm rectangular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting,1.5 mm thick supported on a mild steel angle iron posts 75 mm x 75mm x 6mm, firmly fixed to the ground by means of properly designed foundation with M- 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 801. (ii) 600 mm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting,1.5 mm thick supported on a mild steel angle iron posts 75 mm x 75mm x 6mm, firmly fixed to the ground by means of properly designed foundation with M- 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 801. (iii) 600 mm Circular

CHAITANYA DAS (BID ID -291723)