Repair and Renovation of 01 No. Commander Jeep Reg. No. AN 01B 8993

Amount

Renovation of cabin and body by replacing the old and corrode plate with 16 SWGI and 18 SWG CRC plate by ARC and gas welding, replacing the old and deteriorated rubber beeding, plastic fiting, providing & fixing of windshield beeding, upholstery work including foam, coir, rexin, velvet clothes, replacement of glass mechanism, head light assy, front and rear indicatior and wiper blade assy. etc., as required by Engineer-in-Charge. MATERIAL i) 18 SWG CRC Plate (4'x8') - 01 No. ii)16 SWG G.I Sheet (4'x8') - 01 No. iii)16 SWG G.I Sheet (4'x8') - 01 No. iv) 4.0 mm Welding Rod - 01 Pkt. v) 2.0 mm Welding Rod - 01 Pkt. vi) Gas welding Rod - 01 kg vii) Carbide - 01 kg viii) Oxygen Cylinder - 01 No. ix) Rubber Beeding & Pad - 01 Set x) Plastic fitting - 01 Set. xi) Side Glass Mechanism - 01 Set.

Painting of Complete vehicle such as Cabin body Chassis rim etc, by applying one coat of primer and PS Grey with Two Coat of approved Ist quality automotive paint the surface preparation before painting should be approved by the Engineer-in-Charge. MATERIAL i) Ist quality Automotive Paint - 1 Ltr. ii) Primer - 1 Ltr. iii) Metal Paste - 1 kg iv)Putty M.C - 1 kg v) P.S Grey - 1 Ltr. vi) Emery Paper - 01 No. vii) Hack saw Blade - 01 No viii) Thinner - 01 Ltr. ix) Black Paint - 01 Ltr.

Complete replacement of old wiring by providing new wiring kit of approved make replacing the old deteriorated fittings like front indicator assy, rear indicator assy, wiper blade assy, Electric horn assy, dash board equipment, switches with new fittings as required MATERIAL i)Complete wiring kit - 1 Set ii)Front indicator assembly with bulb - 1 Set iii)Rear indicator assembly with bulb - 1 Set iv)Wiper blade arm assembly - 1 Set v)Electric horn assembly - 1 Set

Renovation of driver seat and Passenger seat by Providing and fixing ½ inch foam, superior quality rexin linning clothes and upholstery with superior quality rexin under layer foam 6mm thick, etc. as directed by Engineer-in-Charge MATERIAL i) Nylone Rexin - 1 Mtr. ii)Transparent Paper - 1 Mtr. iii) Rexin - 1 Mtr. iv)Under layer 6mm thick - 1 Sq.mm. v)Dendrite - 1 Ltr. vi) Foam 6' x 3' x ½ " - 1 Piece vii) Lining Clothes - 1 Mtr.