Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bidder | |
| 2 | L2₹12.7 L+₹8,366 (0.66%)Rejected-Finance OPP AIR FORCE STATION VPO SORANA DISTT SAHARANPUR UP PIN 247 232 | SAHARANPUR | UTTAR PRADESH | 247232 | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹13.9 L+₹1.3 L (9.93%)Rejected-Finance 93 BAPUJI NAGAR ITC ROAD SAHARANPUR 247001 UP | SAHARANPUR | UTTAR PRADESH | 247001 | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹16.0 L+₹3.3 L (26.4%)Rejected-Finance PLOT NO 261 SHANTI KUNJ ALWAR 301415 RAJ | ALWAR | RAJASTHAN | 301415 | L4 | Rejected-Finance Not lowest | |
| 5 | Rejected-Technical | - | Rejected-Technical Security clearance not given by concern unit |
Tender Value
₹16.5 L
EMD Value
₹33,000
Closing Date
30 Jan 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) AMBALA
HQ CWE (AF) Ambala Ambala cantt 133001
PERIODICAL SERVICES TO OTM AND MD ACCN IN CERTAIN RESTRICTED AREA (ARC) AT SARSAWA UNDER GE (AF) SARSAWA
2023_MES_634099_1
CWE/AF AMB/SAR-46/2023-24
Open Tender
Civil Works
Item Rate
150 days
SARSAWA
For MES enlisted contractor Class E Category a i and for un-enlisted contractor refer NIT
8 documents required · 8 mandatory
₹500
GE (AF) SARSAWA
₹33,000
Yes
21 May 2024
22 Dec 2023
1 Feb 2024
22 Dec 2023
30 Jan 2024
18 Jan 2024
22 Dec 2023 - 1 Jan 2024
Amount
Taking down cement plaster/grit plaster on brick/stone/concrete surfaces of walls/ceiling, etc including racking out joints, hacking for key, scrubbing down with water including removal of debries to distance exceeding 500 mtr complete all as specified & directed.
M&L rendering 10 mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified & directed.
M&L rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick/concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified & directed. Notes: (i) Wherever the work to be executed with mixing of Water Proofing Compund, the same shall be executed without any extra cost to department. The Water Proofing Compound shall be mixed @ 2% by weight of cement content. (ii) However, the Water Proofing Compound (WPC) shall be measured & paid separately.
M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling/soffits, finished even & smooth without using extra cement complete all as specified & directed.
M&L preparation of newly plastered surfaces of wall and applying two coat of Oil bound distemper of approved shade/tint over & including a coat of 1 mm thick wall care putty to make the surface even & smooth complete all as specified & directed.
M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint of approved shade/tint over & including one coat of alkali resistant primer complete all as specified & directed.
M&L preperation of newly plastered surface of ceiling/soffit and applying three coats of white lime wash complete all as specified & directed.
M&L preperation of newly plastered surface of ceiling/soffits and applying two coats of oil bound distemper of approved shade/tint complete all as specified & directed.
M&L preparation of old decorated surfaces of walls and applying one coat of oil bound distemper of approved shade/tint complete all as specified & directed.
M&L preparation of old decorated surfaces of walls and applying two coats of oil bound distemper of approved shade/tint complete all as specified & directed.
M&L preparation of old decorated surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & directed.
M&L preparation of old decorated surfaces of walls including cornices, pliasters etc and applying one coat of white lime wash complete all as specified & directed.
M&L preparation of old decorated surfaces of walls including cornices, pliasters etc and applying two coat of white lime wash complete all as specified & directed.
M&L complete removal of existing treatment on walls/ceilings, preparation of surfaces and applying one coat of 1mm thick wall care putty complete all as specified & directed.
M&L preparation of new/old surfaces of walls/ceilings and applying one coat of 1mm thick wall care putty complete all as specified & directed.
M&L preparation of old decorated surfaces of ceilings and applying one coat of oil bound distemper of approved shade/tint complete all as specified & directed.
M&L preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.
M&L preparation of old painted steel and iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.
M&L preparation of old surfaces of brick/stone/concrete/asbestos cement sheet or plaster surfaces of any description over 10cm girth or width not otherwise described and applying one coat of weather proof exterior emulsion paint complete all as specified & directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed.
M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane including painting/oiling to new putty to match with the existing/new surfaces complete all as specified & directed.
M&L 3mm thick froasted glass and glazing with oil putty in square not exceeding 0.5 sqm in each pane including painting/oiling to new putty to match with the existing/new surfaces complete all as specified & directed.
Supply only integral liquid water proofing compound (ISI marked) complete all as specified & directed.
M&L complete removal of loose concrete and demolition of RCC, if required up to 150 mm thick as in slab, facias, chajja, parapet, roof projection etc. up to 3rd floor buildings, taking out/cutting degraded/rusted reinforcement, applying epoxy primer @0.50 Kg/sqm at junction of old & new concrete, supply & fixing of MS TMT bars up to 10mm dia including cutting binding & welding to the existing reinforcement. Recasting of facia, chajjas, roof projection parapet etc using RCC (1:1.5:3) type A-0 (using 12.5mm graded stone aggregate) including necessary formwork and plastering in cement mortar (1:3) and including finishing with existing finishes such as cement base paint/exterior emulsion paint, primer etc. complete all as specified & directed.
Demolition of Reinforced cement concrete(RCC) of any description and in any position not otherwise specifically provided including cutting the reinforcement as required to facilitate demolition and removal of debris to a distance exceeding 500 mtr complete all as specified & directed. Note: Steel obtained from demolition shall be credited to contractor.
M&L fromwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished flat surfaces of concrete complete all as specified & directed.
M&L reinforced cement concrete(RCC), nominal mix, type B1, 1:2:4 ( using 20mm graded mechanically curshed stone aggregate) as in slabs supported on walls beams and columns in floors, roofs, landings, balconies, cnopies, deck slabs and in shelves and the like complete all as specified & directed.
M&L mild steel TMT bars 10mm dia and over, Fe500/Fe500D grade confirming to IS-1786, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
_----------------------------BLANK------------------_
_----------------------------BLANK------------------_
Demolition of plain cement concrete (un-reinforced) in ground floor and paying not exceeding 15cm thickness (below or above ground level) & removing unserviceable materials to a distances exceeding 500 mtr complete all as specified & directed.
M&L 25mm thick plain cement concrete(PCC), 1:2:4, type B1 (using 20mm graded mechanically crushed stone aggregate) as in leveling coarse for tiles complete all as specified & directed.
M&L 100mm thick plain cement concrete(PCC), 1:4:8, type D-2 (using 40mm graded mechanically curshed stone aggregate) as in sub base complete all as specified & directed.
M&L prepolished cement concrete chequered tiles 30cm x 30cm, 25mm thick, with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape heavy duty, set jointed and pointed in neat cement slurry in floors over & including screed bed of 15mm thick in cement mortar 1:6 complete all as specified & directed.
Dismentling floor, hearth or wall tiling including cement mortar bedding (but or backing), removing serviceable tiles to store and rubbish off the premises to a distance exceeding 500 mtr complete all as specified & directed.
M&L Vitrified ceramic tiles 8mm to 9mm thick, square/ rectangular, polished coloured (light shade as approved) area of each tile not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified & directed.
M&L coloured, non-skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & including 15mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified & directed.
M&L Vitrified ceramic tiles 8mm to 9mm thick (square/ rectangular) polished, coloured (light shade as approved), area of each tile not exceeding 0.36 Sqm, as in vertical srufaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering/backing coat in cement mortar 1:4 complete all as specified & directed.
M&L glazed ceramic coloured tiles as in vertical surface 450mm x350mm, 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over & including 10mm thick rendering/backing coat in cement mortar 1:4 complete all as specified & directed.
M&L 18/19mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15mm thick screed bed cement mortar 1:6 complete all as specified & directed
S&F in repair powder coated stainless steel drapery rod of 25mm inner dia ( in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams, including PVC curtain rings of matching colour @ 10cm C/C complete all as specified & directed.
For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted from total quoted amount of BOQ to arrive contract sum.
SUBHASH CHAND CONTRACTOR
G.H. INFRASTRUCTURE PRIVATE LIMITED
RADHA ENTERPRISES
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .