Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.5 L+₹5.0 L (20.6%)Rejected-Finance 01 SORANA NAKUR SAHARANPUR UTTAR PRADESH 247232 | SAHARANPUR | UTTAR PRADESH | 247232 | L2 | Rejected-Finance BEING L2 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
9 Jan 2021, 6:00 pmClosed
GE AF THANE
The Garrison Engineer (AF) Thane Kolshet Road, Sandoz Baugh Post,Thane 400607
REPAIR TO JOINERY, PLUMBING, SANITARY FITTINGS, FLOORING AND OTHER REPAIRS AT MD AND OTM ACCN AND PERIODICAL SERVICES TO CERTAIN BLDGS AT STN SITE P UNDER GE AF THANE
2020_MES_389509_2
8922/E8
Open Tender
Civil Works
Item Rate
330 days
THANE
AS PER NIT
8 documents required · 8 mandatory
₹500
GE AF THANE
₹50,000
Yes
25 Feb 2021
19 Dec 2020
11 Jan 2021
19 Dec 2020
9 Jan 2021
28 Dec 2020
19 Dec 2020 - 28 Dec 2020
Amount
M&L for preparation of, plastered or unplastered old surfaces and applying one coat of white wash , complete all as specified and as directed by Engr-in-charge, on following surfaces
On walls
On ceiling
Ditto as per Item No 1.01 above but applying one coat of colour wash on walls
M&L for preparation of, plastered or unplastered New surfaces and applying two coat of white wash on ceiling, complete all as specified and as directed by Engr-in-charge.
M&L for preparation of, plastered or unplastered old surfaces and distempering with One coat of oil emulsion distemper , complete all as specified and as directed by Engr-in-charge,on following surfaces
On Wall
On ceiling
M&L for preparation of , plastered or unplastered old surfaces and distempering with two coat of oil emulsion distemper ,over a coat of Chalk whiting primer on walls , complete all as specified and directed by Engr-in-charge.
M&L for preparation of , plastered or unplastered new surfaces and applying two coat of oil emulsion distemper over a coat of chalk whiting primer on wall all as specified and as directed.
M&L for preparation of , plastered or unplastered old surfaces and applying one coat of wall care putty 3mm thick , complete all as specified and as directed by Engr-in-charge ,on following surfaces
On wall
On ceiling
M&L for preparation of , plastered or unplastered New surfaces and applying one coat of wall care putty 3mm thick , complete all as specified and as directed by Engr-in-charge ,on following surfaces
On wall
On ceiling
M&L for complete removal of existing surface of wall etc in any position ,washing down with water and cleaning the surface from all loose dirt, chalk, grease, fungi, algal, flakes etc, and applying two coat of weather proof acrylic paint over a coat of weather proof primer , complete all as specified and as directed by Engr-in-charge
M&L for preparation of , plastered or unplastered and applying one coat of Weather coat acrylic paint over a one coat of weather coat primer on walls, complete all as specified and as directed by Engr-in-charge.On the following surafaces:-
On old surfaces
On new surfaces
M & L for preparation of surface of any description,not otherwise described, over 10cm width or girth and applying one coat of synthetic enamal paint , complete all as specified and as directed by Engr-in-charge.On the following surfaces:-
On old steel surface
On old wooden surface
Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key, scrubbing down with water etc ,complete all as specified and as directed by Engr-in-charge.
M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement , complete all as specified and as directed by Engr-in-charge.
M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces ,including finished even and smooth without using extra cement , complete all as specified and as directed by Engr-in-charge.
M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces ,mixed with water proofing compound including finished even and smooth without using extra cement complete all as specified. Note: Water proofing compound will be measured and paid seperately, complete all as specified and as directed by Engr-in-charge.
Supply only Integral water proofing compound, complete all as specified and as directed by Engr-in-charge.
M&L for writing letters or figures (Block,Roman, Italic or Indian) n exc. 30 cm high,(Note: Letters shall be painted with synthetic enamel paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained) , complete all as specified and as directed by Engr-in-charge.
M&L for stops, commas, short line, dashes, hyphens ,brackets, etc (Note: Letters shall be painted with synthetic enamel paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained) , complete all as specified and as directed by Engr-in-charge.
Taking down chowkhats or frames not exc 1.5 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-charge
Taking down door Chowkat Exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-charge
Taking down Shutters of any description n exc 1 sqm each complete all as specified and as directed by Engineer-in-charge
Taking down Shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed by Engineer-in-charge
Resecuring or easing & adjusting without taking down shutters of any description n. exc 1 sqm each, complete all as specified and as directed by Engineer-in-charge.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and as directed by Engineer-in-charge
Taking down aluminum anodized/powder coated windows/doors shutters of any description n exc 2 sqm each and refixing the same duely repaired in position, complete all as specified and as directed by Engineer-in-charge. Note : Damaged members of shutter,glass/wire gages ,builders and hardware fittings replaced to be paid for supply only under relevent item of BOQ.
Supply only aluminium anodised/powder coated frame for doors/windows, ventilators with one or more rebates including joining cleat for fixing , complete all as specified and directed by Engr-in-charge.
Supply only rollers for sliding windows including fixing to aluminium windows section after taking down old unserviceable rollers complete all as specified and as directed by Engineer-in-charge
Supply only stainless steel wire mesh of 0.36mm dia of wire and average width of aperture 1.40mm & fixed with tinted tacks of galvanised over staples ,complete all as specified and directed by Engr-in-charge.
Supply only sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane , complete all as specified and directed by Engr-in-charge.
Supply only aluminium anodised/powder coated star lock for doors/windows ,complete all as specified and directed by Engr-in-charge.
S&F in repair Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-charge
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing , complete all as specified and directed by Engr-in-charge.
S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints , complete all as specified and directed by Engr-in-charge.
S&F 35mm thick IInd class HW rail and style plain framed, panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln seasoned and chemically pressure treated , complete all as specified and as directed by Engr-in-charge.
S&F in repair for 35mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8,clause 8.24 (a); supplied and fitted to chowkats , complete all as specified and as directed by Engr-in-charge.
M&L for medium density fibre board 18mm , exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work , complete all as specified and as directed by Engr-in-charge.
M&L for medium density fibre board 12mm exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work , complete all as specified and as directed by Engr-in-charge.
S&F 35mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc , complete all as specified and directed by Engr-in-charge.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and directed by Engr-in-Charge.
M & L for Cutting holes in brick walls exc half bricks but not exc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good finished dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1, complete all as specified and as directed by Engr-in-charge.
S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long ,complete all as specified and directed by Engr-in-charge.
S&F extruded aluminium alloy handles 150mm fabricated type, anodised ,complete all as specified and directed by Engr-in-charge.
S&F Aluminium alloy, anodised, sliding door bolt with hasp 250 mm long, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy ,complete all as specified and directed by Engr-in-charge. Make:-Classic/Shalimar
S&F in repair ,Aluminium alloy, anodised, sliding door bolt with hasp 250 mm long , staple (bolt type) and fixing clips of sheet, cast or extrude sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy ,complete all as specified and directed by Engr-in-charge .Make-classic/Shalimar.
S&F aluminium anodized barrel tower bolt extruded section and fixed 150mm long,complete all as specified and directed by Engr-in-charge.
S&F extruded aluminium alloy handles 100mm long fabricated type, anodised ,complete all as specified and directed by Engr-in-charge.
S&F but hinges Mild steel 100mm long medium weight cold rolled ,complete all as specified and directed by Engr-in-charge.
S&F Mild steel ordinary rat tail rod 300mm long ,pattern springs including roller and roller plate ,complete all as specified and as directed by Engineer-in-charge
S&F in repair ,mild steel ordinary rat tail rod 300mm pattern springs including roller and roller plate, complete all as specified and as directed by Engineer-in-charge.
M & L for preparation of new wooden surface of any description,not otherwise described, over 10cm width or girth and applying two coat of synthetic enamal paint over coat of pink primer , complete all as specified and as directed by Engr-in-charge.
M & L for preparation of old wooden surface of any description,not otherwise described, over 10cm width or girth and applying one coat of synthetic enamal paint , complete all as specified and as directed by Engr-in-charge.
S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples ,complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel wire mesh of 0.36mm dia of wire and average width of aperture 1.40mm & fixed with tinted tacks of galvanised over staples ,complete all as specified and directed by Engr-in-charge.
S & F in repairs ,Hacking out old broken glass (any thickness, size, quality or description) from wooden, metal frame or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and as directed by Engineer-in-charge
S&F sheet glass ordinary quality 4.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane ,complete all as specified and directed by Engr-in-charge
S&F figured glass, pin-head type 4.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane ,complete all as specified and directed by Engr-in-charge.
S&F floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor with overall length of cover plate 140mm ,complete all as specified and directed by Engr-in-charge.
S&F in repair magnetic catches MS body and striking plate with aproved quality complete all as specified and as directed by Engineer-in-charge
S&F in repair continuous (Piano) hinges, Stainless steel bright finish or electrogalvanised width of flaps (when open) in 40mm ,complete all as specified and as directed by Engineer-in-charge
S&F Stainless steel soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board with suitable screws and other connected accessory required for fixing shall be included in quoted rates ,complete all as specified and as directed by Engr-in-charge.
M & L for Extra over rates of block board or veneered particle board for 12 mm thick for external teak wood lipping, 6mm thick fixed with nails ,complete all as specified and directed by Engr-in-charge.
M&L powder coated aluminium Door/ window/ sliding window / Ventilator / partition frames and shutters using standard aluminium powder coated sections including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws, anodised aluminium fittings suitable Nylon gasket, nylon rollers, maruthi locks, handles, concealed star lock, aluminium F channel for fixing aluminium grill and all necessary fittings and fixtures etc all as specified etc complete of standard sections and fixing to cudappa stone/granite stone with necessary bolts/screws complete directed.
S&F aluminium anodized grill of 4.75 x 7.75 mm, size of opening 10cm, size of mesh RG 103 (as per royal grill) with aluminium channel `F' angle 20mmx15mm fixed to aluminium frame work all as directed.
S&F in repairs aluminium door closer hydraulically regulated, designation No. 3 universal type ,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg,complete all as specified and directed by Engr-in-charge.
S & F in repairs Double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door shutters including making cavities on floor for embedding the floor door springs flush with floor and making good disturbed area ,complete all as specified and directed by Engr-in-charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified as directed by engineer-in-charge
M&L machine cut cudappa stone slab 15-20mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over 10mm thick in CM 1:3 as backing coat to receive cudappa stone slab , complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel kitchen Rack suitable for housing 10 plate of size 30''x 30''x10'' ,complete all as specified and as directed by Engineer-in-charge.(Note: All the the fastners/fixture and suitable accessories for fixing of rack shall be deemed to be included in quoted rates)
S&F in repair Drapery curtain rod/ Harrison rails of anodised aluminium alloy complete with MS brackets golden colour rings and sod caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw, complete all as specified and as directed by Engineer-in-charge
S&F in repair ,15mm two way cast copper alloy cromium plated (CP) bib cock for health faucet, complete all as specified and as directed by Engineer-in-charge
S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm ,complete all as specified and as directed by Engineer-in-charge
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store ,complete all as specified and as directed by Engineer-in-charge
Refixing old 15mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) including clamping with MS Clips Heavy duty minimum 3 mm thick clips,screwing and other required accesseries,complete all as specified and as directed by Engineer-in-charge.(Note : Serviciable tube/pipe retrieved from relevent item i.e taking down ,shall be used against this item)
S& F galvanised iron medium grade 15 mm dia tube, with all fitting and fixtures such as bends, elbows, tees, shorts pieces, back nuts, connectors;laid in trenches complete all as specified and as directed by Engineer-in-charge.
S& F galvanised iron medium grade 15 mm dia tube , with all fitting and fixtures such as bends, elbows, tees, shorts pieces, back nuts, connectors ; fixed to walls and ceilings or laid in floors ,complete all as specified and directed by Engr in Charge.
S&F in repair ,PVC cabinet mirrors of size 550x400x75mm including necessary shelves made of PVC sheets of minimum 5mm thick and mirror fixed on the front side of the shutter with all fitting and fixtures, complete all as specified as directed by engineer-in-charge (Make- Neelkamal,Prayag,Supreme)
S&F in repair ,stop valves 15mm dia fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified as directed by engineer-in-charge
S&F in repair ,Bib taps for 15mm dia bore pipe, fancy type chromiun plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified as directed by engineer-in-charge
S&F in repair ,brass CP brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union,complete all as specified and as directed by Engineer-in-charge
S&F in repair brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges,complete all as specified and as directed by engineer-in-charge
S&F in repair soap dish stainless steel, fixed to plugs with chromium plated brass screws as approved by GE complete all as specified and as directed by Engineer-in-charge
S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union waste pipe; upto 0.5 sqm each, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed by Engineer-in-charge
Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises ,complete all as specified and directed by Engr-in-charge.
S&F coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:3 as backing coat to receive skirting / dado, complete all as specified and directed by Engr-in-charge.
M&L Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) in floors etc.and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:4 for receiving floor finished, complete all as specified and directed by Engr-in-charge. for the following sizes :-
Area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm.
Area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm.
S&F in repair, Vitreous China wash down water closet pan (pedestal pattern), white including, seat and cover for pedestal pan, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor (excluding fixing bolts, flushing cistern and flush pipe) ,complete all as specified and as directed by engineer-in-charge
S&F in repair, 10 ltr capacity PVC valveless, syphonic action type, flushing cistern and flushing pipe, low level, white, with inlet, ball valve, float and handle including brackets,flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified as directed by engineer-in-charge
S&F in repair ,Vitreous China wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, CP waste fitting and PVC waste pipe, complete all as specified and as directed by engineer-in-charge
S&F in repair, vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including, seat and cover, connection to trap, complete all as specified as directed by engineer-in-charge
S&F in repair CP health faucet with 8mm Dia,1 Meter Long Flexible Tube & Wall Hook, including all fixtures and fittings, complete all as specified and as directed by Engineer-in-charge (Make : Prayag, Seiko, Jaquar)
S&F PVC (SWR) pipes 110mm bore single socketed in any length with ruber ring joints fixed to wall , complete all as specified and directed by Engr-in-charge.
S&F in repair Pillar tap fancy type for 15 mm bore of pipe, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed ,complete all as specified and as directed by Engineer-in-charge.
Dismantling water tanks (capacity exc 250 litres but n exc 500 litres capacity) and removing to store ,complete all as specified and as directed by Engineer-in-charge
Dismantling water tanks (exc 500 litres but n exc 1000 litres capacity) and removing to store ,complete all as specified and as directed by Engineer-in-charge
S&F 500 Ltr Rotational moulded polyethene water storage tanks, triple layered (Cylindrical vertical with closed top) including provision of fixing of supports hoisted and fixed in position all as specified in SSR Part I , complete all as specified and directed by Engr-in-charge.
S&F 1000 Ltr Rotational moulded polyethene water storage tanks, triple layered (Cylindrical vertical with closed top) including provision of fixing of supports hoisted and fixed in position all as specified in SSR Part I , complete all as specified and directed by Engr-in-charge.
S&F in repair Gun-metal, globe or gate valves, 20mm dia with iron wheel head, screwed both ends for iron pipe , complete all as specified and directed by Engr-in-charge.
S&F in repair Gun-metal, globe or gate valves, 15mm dia with iron wheel head, screwed both ends for iron pipe , complete all as specified and directed by Engr-in-charge.
M&L for cleaning of Over head PVC Service Tank internally by bailing out of water/sludge from bottom of sump, removing all scale, dirt, alges and other growths from entire surfaces of tank and from mouths of circulating pipes by rubbing with wire brushes and by high pressure cleaning method with rotary sets with approved detergents and sucking all dirty water by vacuum cleaners, disinfecting the tank with approved chemical/bleaching powder for making the surfaces bacteria free and cleaning with fresh water, all as directed by Engineer-in-Charge,for the following capacity of tanks Note : Cleaning of Over head PVC Service shall be carried out carried by contractor without damage to tank or any accessories ,if any the same shall be rectified by contractor without any extra cost.
For Overhead tank exc 250 and n. exc 500ltr capacity
For Overhead tank exc 500 and n. exc 1000ltr capacity
For Overhead tank exc 1000 and n. exc 2000 ltr capacity
singh construction co
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .