Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.6 LAccepted-AOC SAHEED UDHAM SINGH NAGAR THANDI KHUEE SUJANPUR PATHANKOT 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹18.7 L+₹5,540.60 (0.30%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer hence rejected |
Tender Value
₹17.0 L
EMD Value
₹34,000
Closing Date
1 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE
HQ CWE MAMUN (PATHANKOT) PIN-145001
PROVN OF STORES ROOM AT HARIYAL GARRISON AND BLACK ARROW SUVIDHA COMPLEX UNDER GE(S) MAMUN
2023_MES_600193_1
CWE/M-09/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (S) MAMUN
Class E Category a i
7 documents required · 7 mandatory
₹500
GE (S) MAMUN
₹34,000
Yes
23 Nov 2023
1 Jun 2023
3 Jul 2023
1 Jun 2023
1 Jul 2023
19 Jun 2023
Amount
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified & directed.
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed.
Material & labour for Cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregates) in foundation fillings and mass concrete/sub base complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25cm thick, complete all as specified and directed.
Removing excavation material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.
Material & labour for Brickwork with fly ash bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar (1:6), complete all as specified.
Material & labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per Srl item No 07 above but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
Material & labour for use & waste of form work to sides of concrete foundation, footings, bases of columns, rafts and raft beamsand similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified & directed.
Material & labour for use & waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc alo splays between floors and beamsfor rough finished surfaces of concrete, complete all as specified & directed.
Material & labour for use & waste of form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete, complete all as specified & directed.
Material & labour for use & waste of form work to sides of pillars, posts, structs, columns etc. for rough finished surfaces of concrete, complete all as specified & directed.
Material & labour for use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) as rough finished flat surface of concrete complete all as specified and as directed.
Material & labour for Use & waste of form work to edges of concrete flats, treads, break in floors, window cills, concrete railings openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete, complete all as specified & directed.
Material & labour for reinforced cement concrete M-25(Design Mix) with 20mm graded stone aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Material & labour for reinforced cement concrete M-25(Design Mix) with 20mm graded stone aggregate for Beams, cantilevers, lintel over 1.5m span complete all as specified and directed.
Material & labour for reinforced cement concrete (Design Mix) of M-25 grade (20mm graded stone aggregates) as in chajja complete all as specified and directed.
Material & labour for reinforced cement concrete M-25(Design Mix) with 20mm graded aggregate for columns, pillars, piers, posts and struts etc complete all as specified and directed.
Material & labour for reinforced cement concrete (Design Mix) of M-25 grade (20mm graded stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material & labour 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.
Material & labour for Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed.
Material & labour for rendering 5mm thick cement plaster on surfaces of concrete ceiling/top and sides of chajjas/facia of roof projection including necessary formwork in cement mortar (1:3), surface finished even and smooth without using extra cement, complete all as specified & directed.
Material & labour for preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.
Material & labour for preparation of new plastered surfaces of ceiling and apply three coats of white wash on plastered surfaces complete all as specified and directed.
Material and labour for preparation of new plastered surface of wall by applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.
Material & labour for pressed steel frames 125mmx60mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface complete all as specified and directed.
Supply & fixing 35mm thick, 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I for door shutters, complete all as specified.
Supply & fixing 35mm thick factory made 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified.
Supply and fixing box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shuters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts, 150mm long for each leaf and 10mm square bar grills at spacing as shown on Drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on Drg No CEPZ-TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply & fixing mild steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.
Material & labour for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified.
Material & labour for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified.
Supply and fixing 250mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.
Supply and fixing for aluminium anodized barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.
Supply and fixing 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.
Material & labour for Hard core of gauge not exc 63mm using broken stone or boulders, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified
Material & labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio (1:2) by weight complete all as specified and directed.
Material & labour for machine cut kota stone slab flooring not less than 18-20 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 20mm screed layer in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified.
Material & labour for machine cut kota stone slab not less than 15-18 mm thick as in vertical surfaces such as skirting/dado etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 10mm thick plastering in cement mortar 1:4, rubbing, grinding and polishing to achieve mirror finish, complete all as specified.
Material & labour for APP modified roof treatment over non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification complete all as directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufactured by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane, Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.60 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gsm/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650/Sqcm and transverse not less than 450/sqcm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.
Material & labour for 15mm thick plastering in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instructions whilst the concrete surface still green, surface finished even and smooth without using extra cement, complete all as specified and directed. Note : Liquid water proofing compound shall be measured & paid seprately.
Supply only liquid water proofing compound complete all as specified and directed.
Material & labour for Machine pressed precast concrete interlocking paver block any shape and size having glossy finish confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with white cement and pigment (topping thickness not less than 5mm thick and colour pigment non fadable with epoxy coating) including 50mm thick sand cushioning under paver block including watering and consolidating, complete all as specified & directed.
Material & labour for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as in edging of path (interlocking paver) and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.
Material & labour for Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bend, junction box and pressed steel sunken box 60 mm deep & 1.6 mm thick duly painted inside and anticorrosive out side for mounting switches, sockets, fan regulators with 3mm thick plastic laminated sheet cover of suitable size, connecting earth for light/fan/bell point including cutting chases in walls and making good to disturbed surface complete all as specified and directed . (Note : Switch/bell push/fan regulator shall be measured and paid separately)
All as per Srl item No. 46 above but for 5 pin 5 Amp socket outlet point on same board controlled by one switch 5Amp one way, complete all as specified and directed.
All as per Srl item No. 46 above but for one 15Amp socket outlet point concealed using 2.5Sqmm FRLS PVC insulated multi-strand copper conductor wire including 2.5Sqmm FRLS PVC insulated unsheathed copper conductor earth wire and making good to disturbed surfaces of wall floor to match existing finishes complete all as specified and directed.
Supply & fixing Socket outlet, 2 in 1, 5 pin, 6 Amp, flush type, AC 230 volts etc complete all as specified and directed.
Supply & fixing Switch piano flush type, single pole, 6 Amp, one way, AC 230 volts etc complete, all as specified and directed.
Supply & fixing Switch piano flush type, single pole, 16 Amp, one way, AC 230 volts etc complete, all as specified and directed.
Supply & fixing Socket outlet, 2 in 1, 6 pin, 6 Amp & 16 Amps, flush type, AC 230 volts etc complete all as specified and directed.
S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as specified and directed.
Supply & fixing Ceiling rose polycarbonate isolated body surface Bakelite, not less than 65 x 50 mm, three terminals, AC 230 volts etc, complete all as specified and directed.
Supply & fixing Lamp holder, insulated body, with back plate for batten fittings including 9W LED lamp, complete all as specified and directed.
Supply and fixing LED tube lights fitting 1x20W, 220V, AC white powder coated CRCA box type channel with decorative end cap alongwith LED T8 tubular lamp 20W linear with extruded aluminium/ pc body and PC diffuser and inbuilt driver including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing Energy saving, surface mounted bulk head luminaire 10W made of pressure die cast aluminium housing with IP 65 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
Supply & fixing sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
Supply & fixing sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
Supply & fixing MCB single pole (SP) 240 volts, 6 to 32 Amps, 10KA (B-series) complete all as specified and directed.
Supply & fixing MCB SPN 240V, 32 Amps, 50Hz, 10 KA (C-series), complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and including writing of MES No with black enamelled paint as per directed by Engr-in-Charge.
Material & labour for earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, HDPE pipe 15mm bore as protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No.3 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in unit rate quoted by the contractor. 2. Earth filling shall be done by vegitable soil. 3. Soil shall be free from stone, boulders, aggregate, gravels .
Supply, laying, testing and commissioning for 1100 volt grade XLPE insulated heavy duty cable, 16 sqmm 2 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches/Poles/Protection pipe etc. complete all as specified and directed. Note : Excavation & Earthwork shall be measured and paid separately.
Material & labour for sand filling in trenches dry and and clean sand unwashed including punning around cable for protection of under ground cable complete all as specified and directed. [Note : Punned thickness shall be measured and paid]
Material & labour for well burned bricks , laid flat ( old size) sub class B designation 75 for cable protection complete all as specifed and directed.
Supply & fixing GI tubing 40 mm bore light grade laid in trenches/floors/ fixed to wall/poles for protection of cable with necessary fittings and FI clamps duly painted complete all as specified and directed.
Supply and fixing 25W LED building street light fitting made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP 65 protection and impact resistance of IK07 duly mounted on bracket of 32/40 mm bore GI light grade pipe made to shape of suitable length with clamps of FI 40x6mm to fixing street light fittings on wall by means of nuts, bolts including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
M/S NARESH KUMAR SHARMA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .