Repair Maintenance Internal painting and Misc Civil Work in newly allotted 4 Nos staff quarters at 9 B Saket Nagar Type V 7 V 5 IV 4 III 3 and II 81 P and T Colony Bairesiya Road Bhopal MP

Amount

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

20 mm dia (heavy type)

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

15 mm cement plaster on rough side of single or half brick wall or floor finished with a floating coat of neat cement of mix :

1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete :

New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade.

Old work (one or more coats)

Old work (Two or more coats)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes and refixing existing wooden fillets:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Orissa pattern W.C Pan of size 580x440 mm

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Engaging one no carpenter with one no helper for repairing door shutters , window shutter, cupbord shutter and other wooden work in staff quarter by Taking out existing wooden door/window shutter, repair by cutting, painting etc. and refixing to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. ( nothing extra shell payment for hinges )

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Cleaning of all rooms toilet including removal pa old paint patche vegitetion etc of S/Q ,building by sweeping , removal of weat roof and cornes etc , and washing rooms toilet by chemical floor cleaner phenoyle acid etc and removing and disposal of all malba beyond campus campus a dumping ground specified by municipal corporation all complete as per direction of Engineer in Charge

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing syphen kit of approved quality for PVC flush tank

Providing and fixing ball cock for of approved quality for PVC flush tank

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

White solid plastic seat with lid

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 8 mm dia pvc hand fuset /hand shower Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:

15 mm nominal bore.

Providing and fixing PTMT bib cock of approved quality and colour.

15 mm nominal bore, 122 mm long. Weighing not less than 99 gms.

Providing and fixing PTMT stop cock of approved quality and colour.

15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT pillar cock of approved quality and colour .

15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete (a). Semi rigid pipe

32 mm dia

40 mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length -15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore.

Providing and fixing C.P. brass Two way bib cok approved quality conforming to IS:8931 :

15mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC SWR/ rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes (i)Single socketed pipes. .

75 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler 75mm

Coupler 110mm

Single tee with door 75x75x75 mm

Single tee with door 110x110x110 mm

Bend 87.5° - 75 mm bend

Bend 87.5° - 110 mm bend

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

20 mm nominal outer dia. Pipes.

25 mm nominal outer dia .Pipes.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

25mm nominal bore. Weighing not less than 62 gms.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

20 mm nominal bore, 120 mm long. Weighing not less than 198 gms.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of nails 75mm bombay nail/ screwed with M.S. screws of required length, including making good the wall etc. complete.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 75 mm outlet

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). (a) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)

Uprooting of plants/ removal of vegetation from roof and shafts rooms ,removal of broken furniture, unuseable material , Cleaning of silt, earth, rubbish from roofs including cleaning of rain water pipe inlets etc. cleaning of open surface area , building cornices, projections, chajjas from Qtrs block ( i.e two number adjacent roofs and mumty ) at all floor levels & removal of rubbish beyond municipal limit by mechanical transport all complete as per direction of engineer in charge.

Repair of rain water pipe line adjoining to building including cutting of branches of tree joining to existing water supply / drainage pipeline height upto floor five level including removing and refixing of pipe line cutting all branch touches the bulding/pipeline with cutting tools rope /ledder/ scafolding etc with all sefty arrangment including providing necssary clamp and cement repair work whereever necessary etc all complete as per direction of Engineer -in charge (Item inludes all safty arragement ,nothing extra shell be paid for safty arregements repairing of pipeline etc.s if during removing /refixing any GI fittings or CI pipe line is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Supply of water proofing compound of Dr fixit 301 ,or Micro create 81 of choukse chemical or equevelent manufecture .

Providing and laying water proofing treatment on Mumty roofs of slabs up to floor five level by applying cement slurry mixed with water proofing cement compound applying: following opretions.(a) Surface preparation,as dismantaling of old plaster surface ,first layer of slurry of cement with water proofing cement compound as per manofacture's specification. b) Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand :10mm to 15mm graded agrregate ) for making slope and filling dipressed area. (c) laying layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. d)Applying 15mm plaster of mix 1:4 (1cement : 4 coarse sand mix with water proofing matrerial Dr fixit301 or euevelent manufacture, (e) Final layer of floating coat of 1.5 mm thickness consisting of slurry of cement mixed with water proofing cement material as per manufacture 's specification This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around. Finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (water proofing compound will paid separately in relevant item)

For the purpose of measurement the entire treated surface will be measured.

PRAAKRIT ENGINEERS (BID ID -933126)

M/S AWASTHI ENTERPRISES (BID ID -931931)