Repairs/Renovation of Compound Walling of JEs Quarter at Langate (To Be Used as Office for Divisional Office Langate)

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 120 cm girth upto and including 240 cm girth.

Earth work in excavation in all kinds of soil by mechinical means in trenches for foundation, drains, pipes, cables etc. (not exceeding 1.5 Mtr. In width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan depth up to 1.5 Mtr; including disposal of excavated earth and Root Cutting as per the directions of engineer incharge complete job.

Supply & laying of dry stone soling including hand packing and ramming including all leads lifts cost & carriages of materials involved upto site of work complete.

Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 4: 8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size Crushed, including all leds, lifts cost & avg carriages of materials upto site fo work complete.

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C work, including straightening, cutting, bending, placing in position and binding all complete. Hot rolled deformed bars, including all carriages/ Head load of material involved.

Centering & Shuttering including strutting propping etc & removal form work in foundation, footing etc complete including all leads, lifts, costs & carriages upto site of work complete.

Brick work with common burnt clay F.S.C. moulded perforated bricks of class designation 7.5 conforming to I:S: 2222 in Superstructure above plinth level upto floor five level in cement mortar 1:6 ( 1 cement : 6 coarse sand ) and curing complete COMPLETE JOB.

labour charges for fixing of avaliable Brick work with common burnt clay in Superstructure above plinth level upto floor five level in cement mortar 1:6 ( 1 cement : 6 coarse sand ) and curing complete in: With (non-modular) bricks COMPLETE JOB.

labour charges for fixing of avaliable Stone work in cement mortar 1:6 ( 1 cement : 6 coarse sand ) and curing complete in: COMPLETE JOB.

Structural steel work for frame work of compound Fencing incl. Priminng. Welded.

Providing and fixing precoated galvanized high-rib iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side ofthe sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be Fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. ridges included of approvedd brand.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and Laying of 50mm Thick Cement Concrete Copping in 1:2:4 Mix 13.2 Nominal Size of Aggregate.

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing incl scratching/Removing of Existing Joints.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm).

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Including Carriage.

Supplying and stacking of good quality earth, free from stones, rubbish, roots, weeds, or any other foreign materials, suitable for gardening and horticultural purposes. Earth to be brought from an approved source, spread and leveled at site as directed by Engineer in Charge Incl all types of Royalty Charges.

Labour charges for fixing of existing wood available at divisional office for construction of framework of shed including nails and all necessary fixtures (complete job)

Labour Charges for fixing of Existing CGI Sheets incl cost of all necessary fittings. Complete job

Providing and fixing PVC pipe of approved make ( B grade pipe of prince make or phnolex made) incl clamping etc all complete. 8 inch Dia.

Supply & Installation of ACP Sign Board (Aluminium Composite Panel) with 3mm thick ACP sheet (front-lit or back-lit as specified), mounted on MS frame Acrylic Bold Letters (Laser-cut, outward-facing, 3D look), 4-6mm thick, mounted on ACP board.