SPL REPAIR TO CEILING FAN, EXHAUST FAN AND WALL FAN AGAINST BER AND PROVN OF ELECTRIC METERS WORK UNDER GE (E) MATHURA

S&F Ceiling Fan having sweep 1200 mm, 3-blades of aerodynamic ABS material (dust & mark resistant), energy-efficient BLDC motor single phase with inverter technology consuming not more than 28 W at rated speed of approx. 280 RPM and air delivery not less than 245 m³/min. The fan shall be supplied without LED under light and in Pearl White colour finish only. The fan shall include RF remote control with timer (up to 8 hours), sleep/breeze modes, and memory function. Noise level shall be whisper-quiet. The fan shall have 5-Star energy rating,Service value not less than 7.40, 2 years manufacturer’s warranty, and be BIS/ISI marked wherever applicable. Installation shall be carried out by authorized service personnel with all accessories complete as per manufacturer’s standard.

S&F Ceiling Fan having sweep 1400 mm, 3-blades of aerodynamic ABS material (dust & mark resistant), energy-efficient BLDC motor single phase with inverter technology consuming not more than 28 W at rated speed of approx. 250 RPM and air delivery not less than 300 m³/min. The fan shall be supplied without LED under light and in Pearl White colour finish only. The fan shall include RF remote control with timer (up to 8 hours), sleep/breeze modes, and memory function. Noise level shall be whisper-quiet. The fan shall have 5-Star energy rating, Service value not less than 7.40, 2 years manufacturer’s warranty, and be BIS/ISI marked wherever applicable. Installation shall be carried out by authorized service personnel with all accessories complete as per manufacturer’s standard.

S&F down rod MS grade 15 mm bore of length upto 90 cm suitable for ceiling fans of any type and size including cutting, drilling holes, making thread and painting complete all as directed.

S&F down rod MS grade 15 mm bore of length upto 180 cm suitable for ceiling fans of any type and size including cutting, drilling holes, making thread and painting complete all as directed.

Taking down aluminium/copper point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, flourescent tube light fittings etc, removing materials to store for keeping in safe custody or for taking credit and making good to the disturbed surfaces of walls, ceilings and floors etc complete all as specified and directed by Engr-in-Charge.

M&L for Point wiring for One Light/fan point controlled by one way switch 5 amp, with 1.5 Sqmm (nominal area) single core PVC insulated sheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc or including sunk cast iron /pressed steel/terminal boxed for mounting flush type switches/sockets etc with 3 mm thick phenolic laminated sheet covers and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge as described below:-

All as per item No. 6 here in above but for One 3 pin 5 Amps socket point controlled by one way switch on same board.

All as per item No. 6 here in above but for One 3 pin 5 Amps socket point controlled by one switch on independent board

All as per item No. 6 here in above but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

Supply and Fix Modular switch 6 Amps single pole one-way, 1 Module complete as per existing, as specified and directed by Engr- in- Charge.