Construction of Girls Hostel at Bokakhat in Golaghat District

Amount

Earth work in Excavation for foundation trenches of walls , Retaining walls, footing of column , steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work , breaking clods in return filling , dressing Watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. Upto a depth of 2 mts. below the existing Ground Level. In ordinary Soil

Earth /Sand filling in plinth in layers not more than 150 mm thick including necessary carriage , watering , ramming etc. completed and specified including payment of land compensation , forest royalty , sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work.

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. Brick on flat soling.

Plain cement concrete works with course aggregate of sizes 13mm to 32mm in foundation bed for footing steps, for walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (Shuttering where necessary shall be measured and paid separately). (a) In proportion- 1 cement : 3 sand : 6 coarse aggregates by volume.

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). (I) Using Mixer Machine, (i) In substructure up to plinth level, Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser, (b) M20 grade concrete or Prop. 1:1.5:3.

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). (i) In super structure from plinth level up to 1st floor level, Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. (N) Without using admixture, plasticiser, (b) M20 grade concrete or Prop. 1:1.5:3

Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for cast - in - situ reinforced concrete and plain concrete work.(a) In Substructure upto Plinth Level, (i) Foundation, footings, base of columns, pile cap, raft and mass concrete works etc. Using 25mm thick plank.

Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for cast - in - situ reinforced concrete and plain concrete work.(a) In Substructure upto Plinth Level, (ii) Sides of tie beams, plinth beams, grade beams etc. at or below plinth level. Using 25mm thick plank.

Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for cast - in - situ reinforced concrete and plain concrete work.(b) In Superstructure from Plinth Level upto Floor Level-1, (i) Columns, pillars, posts and struts, (a) Square, Rectangular, polygon in plan or any shape like Tee/L etc. having plane vertical face. Using 25mm thick plank.

Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for cast - in - situ reinforced concrete and plain concrete work.(b) In Superstructure from Plinth Level upto Floor Level-1, (ii) Sides and soffits of beam, beam hunching, cantilever, girders, bressumers, lintels and horizontal ties. Using 25mm thick plank.

Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for cast - in - situ reinforced concrete and plain concrete work.(b) In Superstructure from Plinth Level upto Floor Level-1,(iii) Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200mm in thickness. Using 25mm thick plank.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary. (b) In proportion 1:4.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately).(A) 112mm thick brick wall. (a) In cement mortar in proportion 1:4.(1 cement:4 sand)

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows, cupboard and other similar works wrought, framed and fixed in position in contact with C.C or Brick masonry walls including supplying, fitting and fixing with M.S flat holdfast (40mm x 3mm x 250mm) as per design and embedded in cement concrete blocks in prop 1 : 2 : 4 with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)

Providing and fixing Flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panel conforming to relevent to IS Code including oxidised iron butt hinges (100 mm X 75 mm X 3.5 mm) 6 nos. with necessary wood screws. (b) Non decorative type and block board core.(iii) 30 mm thick .

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code for R.C.C work/ R.B walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports , chairs, spacers etc. complete. (b) TMT Bars (Fe 500), (i) TATA/SAIL, In Substructure & Superstructure upto Floor Level-1:

40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed.

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. Ceramic TILES, (ii)Executive range-1 (Sizes 400 mm x 400mm and above).

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). (a) Normal range Somany/ Orient/Nitco/Asian Make, (ii) Of size 200mmx300mm and above.

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (A) On rough side, (b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. On fair side. In cement mortar 1:6

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (ii) Thickness = 1.0 mm

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.

Supplying, fitting and fixing anodized aluminium fittings of approved make, reasonably smooth, free from sharp edges flaws and other defects and with counter sunk holes for screws including necessary screws etc. complete ( anodized to bright natural matt or satin finish.( a )Sliding door bolts .(i) 300 mm x 16 mm

Supplying, fitting and fixing anodized aluminium fittings of approved make, reasonably smooth, free from sharp edges flaws and other defects and with counter sunk holes for screws including necessary screws etc. complete ( anodized to bright natural matt or satin finish.( b )Tower bolts. (i) 250 mm x 12 mm

Supplying, fitting and fixing anodized aluminium fittings of approved make, reasonably smooth, free from sharp edges flaws and other defects and with counter sunk holes for screws including necessary screws etc. complete ( anodized to bright natural matt or satin finish.( c )Door handle. (i) 100 mm

Supplying, fitting and fixing anodized aluminium fittings of approved make, reasonably smooth, free from sharp edges flaws and other defects and with counter sunk holes for screws including necessary screws etc. complete ( anodized to bright natural matt or satin finish. (d)Eye and hook. (i) 300 mm

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (b)3 Track sliding window, (iv) 5 mm clear glass

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. (a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement. (ii) 0.45 mm thick

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. (ii) 0.45 mm thick

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. (I) Plain grill, (c) Fixed to Brickwork/P.C.C/R.C.C.

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coats) on new wood and wood based surfaces with enamel paint of approved brand and manufacture ( Asian paint/Berger paint/ICI paint/ J & N paint/Nerolac) to give an even shade including cleaning the surfaces of dirt, dust and other foreign materials sand papering and stopping. (i) Surfaces over 100mm in width / girth. (b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Applying primary coat over new steel and other metal surface over 100 mm in with or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel, would scrapers and sand paper.With ready mixed "Red-Lead"/red oxide primer

Painting two coats (Excluding priming coats) on new steel and other metal surface with enamel paint of approved brand and manufacture to give an even shade including cleaning the surfaces of dirt, dust and other forein matters.Surfaces over 100mm in width or girth. (b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. (b)12.5mm thick

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 40mm x 40mm x 6mm M.S. angle and with M.S. flat of 40mm x 6mm size as per approved design.Necessary locking arrangement for temporary closing the gate and 2nos.( minimum) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embedded in C.C brick pillers as necessary including a red oxide painting to all iron works as directed and specified.(Separate payment will be made for posts).

Providing rails for plying of rollers of gate made made from 50mm x 6mm size M.S. flat and to be fitted with 3 nos of hinged hold fasts to be embedded in concrete prop. 1:2:4 of 10mm wide and 75 mm deep over brick flat soling 250mm wide including curing etc. complete.

Providing roller to the gate including welding etc.complete. (a) With 25mmx50mm (dia) roller

Providing fitting and fixing vitreous china pedestal type water closet(European type W.C pan 400mm high) with seat and lead, CP brass hinges and rubber buffers , CI/MS brackets , 40mm dia flush band with fittings including painting of fittings and brackets,required.(Flushing Cistern to be paid separately) A) Parryware make a) White

Supplying,fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe,union clamps etc.compete as directed and specified (pipes will be measured separately) I)Parryware make iv)Deluxe Dual Flush (Cat No.C8110)

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets,cutting and making good the walls wherever required. ( Pillar cock,stop cocks,waste coupling are to be paid separately) Basin (Without pedestal) B) Hindware Make a)White ii)Standard 630 x 450 (Cat. No. 10001)

Providing fitting and fixing Mirror with plastic frame of size 500 x 400mm complete as directed and specified.

Providing fitting and fixing Glass Shelf complete as directed and specified. Glass shelf with C.P. guard rail vi) Agmeco make a)Cubin (Cat. No.CB - 00104)

Providing,fitting and fixing CP soap tray / soap dish complete as directed and specified. i) Jaquar Make a) Continental (Cat.No.ACN-1331N)

Providing, fitting and fixing CP towel rail complete as directed and specified. a) Jaquar Make iii) Queen's (600mm long) (Cat.No.AQN-7711)

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. a) Jaquar Make i) 32mm (HT/FT) (Cat.No.ALD-705/709)

Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. a) Jaquar Make i)Bottle trap (with internal partition) 32mm size with 250mm long wall connection pipe(Cat.No.ALD-769)

Supplying,fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/ Prince) or other ISI approved including joining,fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. i) 160mm dia

Supplying,fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/ Prince) or other ISI approved including joining,fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. ii) 110mm dia

Supplying,fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/ Prince) or other ISI approved including joining,fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. iii) 75mm dia

Supplying,fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. i) 160mm dia

Supplying,fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. ii) 110mm dia

Supplying,fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. iii) 75mm dia

Supplying,fitting and fixing 87.5 degree PVC bend of with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. i) 160mm dia

Supplying,fitting and fixing 87.5 degree PVC bend of with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. ii) 110mm dia

Supplying,fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. i) 160mm dia

Supplying,fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. ii) 110mm dia

Supplying,fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. iii) 75mm dia

Supplying,fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. i) 160mm dia

Supplying,fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches.ii) 110mm dia

Supplying,fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. iii) 75mm dia

Supplying,fitting and fixing PVC single 'Y' with door of (Supreme/Prince) or other ISI apprived including joining,fitting and fixing etc. as necessary complete at all level including below GL as directed and specified. a) In exposed surfaces or in trenches. ii) 110mm dia

Providing fitting & fixing C.I Grating to the floors complete as directed and specified. a)110mm dia

Providing fitting & fixing (300x230)mm C.I. yard gully hinged Grating complete as directed and specified.

Providing fitting and fixing 450mm dia.90mm thick C.I. Man hole cover and frame of 58 Kg. weight complete as directed and specified.

Construction of inspection pit inside measurement 450mm x 450mm x 450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in propotion 1:3:6 over flat brick soling , 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor.450mm x 450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed

Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride)pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified. (Note: Ball valve and union will be charged extra and does not comes under Accessories) ii)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to damages b)20mm OD

Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride)pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified. (Note: Ball valve and union will be charged extra and does not comes under Accessories) ii)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to damages d)32mm OD

Supplying fitting and fixing approved UPVC Pipes of different sizes,with all necessary 'R' brand or similar approved UPVC fittings such as bend,tee,elbow,reducer,nipple,plug,long screw fitting,clamps etc.complete at all levels including below G.L. as directed and specified.B)Concealed by chieselling or breaking brick wall/C.C. wall/R.C.C. wall and making good to the damaged structure. SUPREME/PRINCE/SFMC/FUSION brand or other equvalent approved brand (High presure pipe Sch - 40) c)32mm dia

Supplying fitting and fixing approved UPVC Pipes of different sizes,with all necessary 'R' brand or similar approved UPVC fittings such as bend,tee,elbow,reducer,nipple,plug,long screw fitting,clamps etc.complete at all levels including below G.L. as directed and specified.B)Concealed by chieselling or breaking brick wall/C.C. wall/R.C.C. wall and making good to the damaged structure. SUPREME/PRINCE/SFMC/FUSION brand or other equvalent approved brand (High presure pipe Sch - 40) d)25mm dia

Supplying fitting and fixing approved UPVC Pipes of different sizes,with all necessary 'R' brand or similar approved UPVC fittings such as bend,tee,elbow,reducer,nipple,plug,long screw fitting,clamps etc.complete at all levels including below G.L. as directed and specified.B)Concealed by chieselling or breaking brick wall/C.C. wall/R.C.C. wall and making good to the damaged structure. SUPREME/PRINCE/SFMC/FUSION brand or other equvalent approved brand (High presure pipe Sch - 40) f)15mm dia

Supplying fitting and fixing C.P.bib cock 15mm dia of approved brand as directed as specified.(G.I. & C.P. pipes will be measured separately) b) Long body bib cock with wall flange

Supplying fitting and fixing chrome plated (C.P.)stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P. pipes will be measured and paid separately) I) Jaquar b)Queen's collection/the stealth ranger (for VIP use.prior approval of Chief engineer PWD (Bldg) must be taken before use) i)Angular stop cock with wall flange

Supplying fitting and fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed ii) Jaquar make b)Long neck with areator

Supplying fitting and fixing chrome plated (C.P.)sink cock of approved brand as directed and specified.(G.I. & C.P. pipes will be measured and paid separately) I)Sona brand b)Sink cock J spout

Supplying and placing plaster cylindrical vertical claused top (PCVC) tank of Sintex/ Polycon/ Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes I)2000 Lt capacity a)Sintex make

Labour for erecting and placing PCVC tank over the stagging of 5.00m up to 8.00m complete as directed. a)2000 litre capacity

Wiring to a Light/Fan/Call Bell point with 2X1.5 sq.mm. PVC Insulated single core unsheathed industrial (Multistrand) cable F.R. conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 V olts ( Finolex/ RR Kabel or equivalent make as approved by the Deptt) in surface/recessed conduit wiring system with 20 mm dia 2 mm thick/heavy rigid IS : 9537 Part III conduit ( Berlia/AKG/Precision/ Presto Plast/ Polycab/MW or equivalent make as approved by the Deptt.) including 6 Amps flush Type Switch/bell push ( Anchor Penta/ Gold Medal / Kolor kany.kom /Havels or equivalent make as approved by the Deptt.) GI/MS switch board (ISI marked) with Phenolic laminated sheet cover ceiling rose ( Anchor penta / Gold medal / Kolor kany.kom / Havels or equivalent make as approved by the Deptt. Etc.complete. (i) medium point upto 6mtr length

Wiring to a Light/Fan/Call Bell point with 2X1.5 sq.mm. PVC Insulated single core unsheathed industrial (Multistrand) cable F.R. conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 V olts ( Finolex/ RR Kabel or equivalent make as approved by the Deptt) in surface/recessed conduit wiring system with 20 mm dia 2 mm thick/heavy rigid IS : 9537 Part III conduit ( Berlia/AKG/Precision/ Presto Plast/ Polycab/MW or equivalent make as approved by the Deptt.) including 6 Amps flush Type Switch/bell push ( Anchor Penta/ Gold Medal / Kolor kany.kom /Havels or equivalent make as approved by the Deptt.) GI/MS switch board (ISI marked) with Phenolic laminated sheet cover ceiling rose ( Anchor penta / Gold medal / Kolor kany.kom / Havels or equivalent make as approved by the Deptt. Etc.complete. (ii) long point upto 10 mtr length

Wiring to a 5 pin 6 A plug point with 1.5 sq.mm. PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100V (Finolex/ RR Kabel or equivalent make as approved by the deptt.) in surface /recessed 2 mm thick/heavy rigid ISI marked IS : 9537 PART III rigid PVC conduit (( Berlia/AKG /Precision/ Presto Plast/ Polycab/MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 A flush type plug socket and 6 A F/T switch (Anchor penta/ Gold Medal/Kolor kany.kom/Havels or equivalent make as approved by the deptt.), GI/MS switch board (ISI marked with phenolic laminated sheet cover including earth continuity with 1.5 sq.mm. cable to third point of the plug socket etc. as required complete, when placed elsewhere. (i) Medium point up to 6 Mtr. Length

Wiring for 5/6 pin 16 A plug with 4 sq.mm. PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100V (Finolex/ RR Kabel or equivalent make as approved by the deptt.)in surface/ recessed conduit wiring system including 5/6 pin 16 A socket outlet (Anchor penta/ Gold Medal/Kolor kany.kom/Havels or equivalent make as approved by the deptt.) and 16 A flush type switch (Anchor penta/Gold Medal/Kolor kany.kom/ Havels or equivalent make as approved by the deptt.) GI/MS switch board (ISI mark with Phenolic laminated sheet cover earth continuity with 2.5 sq. mm. cable to the third pin of the socket as required complete with 20 mm dia 2 mm thick heavy rigid ISI marked IS : 9537 Part III rigid PVC conduit (Berelia/AKG/ Precission /Presto Plast /Polycab/MW or equivalent make as approved by the Deptt.) Extra long point up to 15 meter length.

Wiring for circuit wiring with PVC insulated Single core unsheated industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage up to 1100 V (Finolex/RR kabel or equivalent make as approved by the deptt) in surface/recessed PVC conduit (Berlia/AKG/precission/Presto Plast/Polycab /MW or equivalent make as approved by the deptt) wiring system. with 3 X 1.5 sq.mm. P.V.C. insulated cable in 20 mm. dia rigid conduit.

Wiring for drawing Sub-Main Line with PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage up to 1100 V (Finolex/RR kabel or equivalent make as approved by the deptt) in surface/ recessed PVC 20 mm dia 2 mm thick heavy ISI marked IS 9537 Part III rigid PVC conduit (Berlia/AKG/precission/Presto Plast/Polycab /MW or equivalent make as approved by the deptt) wiring system. With 4 X 4 sq.mm. + earth continuity with 2X2.5 sq.mm.cable in 25 mm dia 2 mm thick/heavy rigid PVC IS : 9593 part III conduit.

Wiring for drawing Sub-Main Line with PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage up to 1100 V (Finolex/RR kabel or equivalent make as approved by the deptt) in surface/ recessed PVC 20 mm dia 2 mm thick heavy ISI marked IS 9537 Part III rigid PVC conduit (Berlia/AKG/precission/Presto Plast/Polycab /MW or equivalent make as approved by the deptt) wiring system. With 4 X 6 sq. mm + earth continuity with 2 X 4 sq. mm cable in 32mm. Dia. 2mm thick/ heavy rigid PVC IS: 9537 Part-III conduit .

Supplying including fitting and fixing of following Metal boxes for MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) in surface/recessed system complete as per direction of department. (i) 1-2 module type metal.

Supplying including fitting and fixing of following Metal boxes for MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) in surface/recessed system complete as per direction of department. (ii) 8 module type metal.

Supplying including fitting and fixing of following Metal boxes for MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) in surface/recessed system complete as per direction of department. (iii) 12 module type metal.

Supplying including fitting and fixing of following MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. (i) 2 module.

Supplying including fitting and fixing of following MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. (ii) 8 module.

Supplying including fitting and fixing of following MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. (iii) 12 module.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof double door(IP-43) surface mounting vertical TPN MCB DB incorporated with bas- bar 125A, neutral link, earth bar and din rail etc fitted on wall with grouting nuts and bolts as required complete with making necessary connection as approved, specified and directed by the deptt. (Richa, Bentec, Adhunic/ equivalent make) (ii) 12 way TPN (8+36) double door

Supplying with fitting and fixing SPN 10KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B series( Schneider MG, legrand, Hager, Crabtree Xpro Make). (i) 6 to 32 A.

Supply, installation & testing of copper plate earth station with 600mmX600mmX6mm heavy duty copper earth plate with necessary 40mm dia. G.I. medium duty watering pipe with G.I fittings such as socket, tee, elbow, nipple and 50mmX40mm G.I. reducing socket for funnel including locking arrangement with 300mmX300mmX6mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

Premium Model 1400 mm sweep (ORIENT /PSPO make)/Premium model 1400 mm sweep SS-390 Deco(havels make).

Supplying including fitting and fixing of following A.C. exhaust fan in the existing hole on the wall of following sweeps with making necessary connections as approved by the Deptt. As required complete and as directed by the department. Power Flow 225mm sweep(ORIENT make)

Supplying fitting fixing of ceiling fan regulator including connections etc complete as required

Supplying including installation, connection as approved by the deptt., testing and commissioning of JET PUMP SET(HORIZONTAL) complete as directed and specified by the deptt. 1 HP single phase JET pump set (Horizontal) (Crompton Greaves/Aquatic/CRI/V-Guard/Calma make) 2900 rpm with DOL starter(Crompton Greaves/Control & Switch Gear/BCH/L&T/Siemens make).

Tube light with tube (hanging type, single tube)

CFL lamp with fittings

GOPAL CHANDRA BORA

Medicos and Engineering