12-Rajwaha Kairana Road Renewal Work From Km 3.357 To Km 5.190

Providing and applying tack coat with Bitumen VG-10 ussing bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared bitumenous/granular surface cleaned with mechanical broom.(S.I.No- 503)

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheele 80-100KN static roller capacity, finished to required level and grades complete all specified in technical specification clause 508 and as directed by the Engineer in charge.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C seal coat.

Brick linning on both side of the road of M-150 bricks 7 cm wide 11 cm deep, laid with mud morter including labour and supply of brick finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in- charge