Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹2.1 L
Closing Date
12 Oct 2026, 5:00 pm
Karnataka Power Corporation Limited
Chetan L Chavan
RTPS-Maintenance of MRHS, Repairs to 500mm width MRHS Conveyor Belt and Monitoring of Rejects from Mill Pyrite Hopper Gates of Mill Reject Handling System of Units 2, 3 & 4 for a period of one year.
KPCL/2026-27/PS/WORK_INDENT4854
KPCL/2026-27/PS/WORK_INDENT4854
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Superintending Engineer MM1 Office RTPS Raichur
9 documents required · 5 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending bidder should have satisfactorily completed as a prime contractor, at least one similar works such as Maintenance of Mill Rejects Handling Systems and Repairs to Conveyor Belt of width 500/600MM in XRP-803/HP-803 of value not less than Rs.70.00 Lakhs (Exclusive of GST) in the last five years (i.e., 2021-22, 2022-23, 2023-2024,2024-25 and 2025-26) in any Thermal power stations having capacity of Generating Unit not less than 200 MW. As a proof of this, the bidder should upload a single work order and corresponding work done certificate issued by the Competent Authority. (Work done of previous years shall be given weight of 10% per year to bring them to the present price level of financial year 2026-27).
The intending bidder in his name should have achieved a minimum financial turnover of Rs.330.00 lakhs in at least two financial years during the last five years (i.e., 2021-22, 2022-23, 2023-2024, 2024-25 and 2025-26). As a proof of this, the bidder shall upload the certified copy of the turnover certificate duly certified by the chartered Accountant. (Financial turnover of previous years shall be given weight of 10% per year to bring them to the present price level of financial year 2026-27).
₹3,500
₹2.1 L
25 Sept 2026
25 Sept 2026
13 Oct 2026
7 Oct 2026
1 Oct 2026
RTPS-Maintenance of MRHS Repairs to 500mm width MRHS Conveyor Belt and Monitoring of Rejects from Mill Pyrite Hopper Gates of Mill Reject Handling System of Units 2, 3 and 4 for a period of one year.
Servicing / overhauling of gear box by replacing worn out bearings gears shaft etc ---- Bidders are requested to go through the bid documents.
Recondtioning / replacement of carrying idler impact pads / its brackets. ---- Bidders are requested to go through the bid documents.
Reconditionig /servicing /replacement of drive / Snub / bend / take up pulley and its plummer blocks ---- Bidders are requested to go through the bid documents.
Servicing /replacement /fabrication of flap gates ---- Bidders are requested to go through the bid documents.
Replacement of skirt rubber. ---- Bidders are requested to go through the bid documents.
Reconditionig /servicing /replacement of return idlers and its brackets ---- Bidders are requested to go through the bid documents.
Cleaning /servicing /replacement of internal and external scrapers ---- Bidders are requested to go through the bid documents.
Servicing / overhauling of sump pumps ---- Bidders are requested to go through the bid documents.
Servicing / replacement of Trailing idler guide roller & its brackets ---- Bidders are requested to go through the bid documents.
Repairs/reconditioning of silo including rack and pinion bottom gate replacement of wear plate etc. ---- Bidders are requested to go through the bid documents.
Replacement /reconditioning / cleaning of transfer chute transfer hopper hopper discharge etc ---- Bidders are requested to go through the bid documents.
Removal of spilled mill reject from the conveyor belt and inside the trenches of MRHS ( one item for clearing spilled reject from trenches of units-2 3 and 4) ---- Bidders are requested to go throug...
Servicing /reconditioning of tail pulley adjustable screw for pillow blocks of MRHS. ---- Bidders are requested to go through the bid documents.
Monitoring/Supervison of Work Shop /MRHS. ---- Bidders are requested to go through the bid documents.
Applying redoxide & enamel/epoxy paint to Conveyor structure/silos gear drives & pedestals of MRHS ---- Bidders are requested to go through the bid documents.
Monitoring & Recording of Mill Rejects, collected in Silos of Units 2 to 8. ---- Bidders are requested to go through the bid documents.
Monitoring & Clearing of chockages in Mill discharge spout per day of MRHS. ---- Bidders are requested to go through the bid documents.
Monitiring & Clearing of pyrite hopper discharge flap gates & Tramp iron spout and clearing of clinkers from Pyrite Hoppers per day of MRHS. ---- Bidders are requested to go through the bid documents.
Removal of spilled reject from pyrite hopper platform mill area etc Per day of MRHS. ---- Bidders are requested to go through the bid documents.
De watering of MRHS trenches/ pits. ---- Bidders are requested to go through the bid documents.
Maintenance of Dust suppression system Nozzels and its acessories per Weekely once. ---- Bidders are requested to go through the bid documents.
Operation of Machineries (Turner/Machinist)/ Housekeeping at RTPS work shop ---- Bidders are requested to go through the bid documents.
Spreading Conveyor Belt of 500 / 600 mm Width of MRHS ---- Bidders are requested to go through the bid documents.
Cold Vulcanizing of Conveyor Belt of 500 / 600 mm Width. (Inclusive of Joining Adhesives) of MRHS ---- Bidders are requested to go through the bid documents.
Pulley Lagging with 15 mm thick Rubber (Inclusive of Lagging Material and Joining Adhesives) of MRHS ---- Bidders are requested to go through the bid documents.
Patch Repairs to Conveyor Belt of 500 / 600 mm Width. (Inclusive of Joining Adhesives) of MRHS . ---- Bidders are requested to go through the bid documents.
Preparation of Released Conveyor Belt from CHP for MRHS of Units ---- Bidders are requested to go through the bid documents.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document MRHS.pdf
Tender Document • 0.79 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .