Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC NO 17 MARIAMMAN KOIL STREET ARUMBARTHAPURAM PUDUCHERRY 605 010 | PONDICHERRY | PUDUCHERRY | 605010 | L1 | Accepted-AOC L1 |
Tender Value
Refer Docs
EMD Value
₹31,764
Closing Date
24 Jun 2024, 10:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Commissioner, BCP
Bahour Commune Panchayat, Bahour
Construction of Library building at Bahourpet Bahour Commune Panchayat
2024_DLA_15677_1
6/BCP/e_Tender/2024-25
Open Tender
Civil Works
Works
180 days
Bahour
Please refer Tender documents.
3 documents required · 3 mandatory
₹525
₹31,764
25 Mar 2025
14 Jun 2024
24 Jun 2024
14 Jun 2024
24 Jun 2024
14 Jun 2024
Amount
Code No: 2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil
Code No: 30.7 Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness
Code No: 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)
Code No: 5.1.2 Providing and laying in position specified grade of reinforced cement concrete ,excluding the cost of centering ,shuttering , finsishing and reinforcement -All work upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
Code No: 5.2.2 Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns ,pillars ,piers , abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)
CODE NO:5.33.2:- Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cementconcrete work , using cement content as perapproved design mix , including pumping ofconcrete to site of laying but excludingthe cost of centering , shuttering ,finishing and reinforcement , includingadmixtures in recommended proportions asper IS : 9103 to accelerate, retard settingof concrete , improve workability withoutimpairing strength and durability . Note:-Cement content considered in this item is @330 kg / cum. Excess or less cement used asper design mix is payable or recoverableseparately. - All work above plinth level upto floor V level.
Code No: 5.9.1 Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete
Code No: 5.9.3 Centering and shuttering including strutting , propping etc and removal of form for - Suspended floors , roofs , landings , balconies and access platform
Code No: 5.9.5 Centering and shuttering including strutting , propping etc and removal of form for - Lintels , beams , plinth beams, girders , bressumers and catilevers
Code No:5.9.6 Centering and shuttering including strutting , propping etc and removal of form for - Columns , Pillars , Piers , Abutments , Posts and Struts
Code No: 5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending, placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG/ IISCO / SAIL / JSW) Fe - 415 or more
Code No: 6.1.2 Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand)
Code No: 6.4.2 Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand)
Code No: 6.12.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in - cement mortar 1:4 (1 cement :4 coarse sand)
Code No:6.15 Extra for providing and placing in position 2 nos 6mm dia M.S.bars at every third course of half brick masonry
Code No:9.1.2V Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Vengai wood
Code No: 9.48.2 Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc
Code No:9.5.1.2V Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately , all complete - Vengai wood -30 mm thick shutters
Code No:9.7.1V Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows andclerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick -Vengai wood
Code No: 9.53 Providing 40 X 5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 30 x10x 15 cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size)
Code No: 9.63.1R Providing and fixing ISI marked powder coating tower bolt black finish (Barrel type) with necessary screws etc.complete -250 x10 mm
Code No:9.63.4 Providing and fixing ISI marked oxidised M.S. tower bolt black finish (Barrel type)with necessary screws etc.complete -100x10mm
Code No: 9.67.1 Providing and fixing oxidised M.S. hasp and each staple (safety type) conforming to IS : 363
Code No: 9.100.1 Providing and fixing aluminium handles, ISI marked , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade,with necessary screws etc, complete - 125 mm
Code No:9.108.2 Providing and fixing PTMT Tower bolts with 12 mm one piece rod inside and necessary screws etc., complete - 202 x42x18 mm weighing not less than 78 gms
Code No: 11.36D Providing and fixing commercial quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) , of approved make (Jhonson / Asian / Somany / Nitco) in all colours , shades of size 200 x 300 mm as approved in skirting , risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching shade complete - size200x300 mm
Code No:11.36A Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer) , of approved make (Jhonson /Asian / Somany / Nitco) in all colours ,shades of size 200 x 300 mm as approved in skirting , risers of steps and dados,over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand ) and jointing withgrey cement slurry @ 3.3 kg per sqm,including pointing in white cement with pigment of matching shade complete - size200x300 mm
Code No:11.40.2 Providing and laying rectified ceramic rustic / matt finish floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make (Somany / Nitco) in all colours shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete
Code No:12.15.1 Painting top of roofs with bitumen of approved quality @ 17kg per 10 sq.m impregnated with a coat of coarse sand at 60cudm per 10 sq.m including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete - with residual type petroleum bitumen of grade VG-10
Code No:12.20L Lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding of junctions with Parapet wall complete
Code No:12.20 Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete
Code No:12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110mm diameter
Code No:12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree -110 mm bend
Code No:12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for nplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) -110mm shoe
Code No:12.43.2 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm
Code No:13.1.1 12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)
Code No:13.2.1 15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine sand)
Code No:13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)
Code No:13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer
Code No:13.44.1 Finishing walls with water proofing cement paint of required shade - New work (Two or more coats applied @ 3.84 kg / 10 sqm)
Code No:13.37.1 White washing with lime to give an even shade - new work (three or more coats)
Code No:13.50.1 Applying priming coat - with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Code No:13.60.1B Wall painting with plastic emulsion paint - Premium of approved brand and manufacture to give an even shade - two or more coats on new work
Code No:13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work
Code No:17.7.2 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32 mm C.P.brass waste of standard pattern ,including painting of fittings and brackets ,cutting and making good the walls wherever required - white Vitreous China wash basin size 630x450 mm with a single 15 mm C.P.brass pillar taps
Code No:17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) - Orissa pattern W.C.pan of size 580x440mm
Code No:17.32.3 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing - Oval shape 450x350mm (outer dimensions)
Code No:17.73.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour - 450 mm long towel rail with total
Code No: 18.17.1 Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 25mm nominal bore
Code No:18.10.2 Providing and fixing G.I.pipes complete with G.I.fittings and clamps, including cutting and making good the walls etc - internal work -exposed on wall - 20mm dia nominal bore
Code No: 18.12.6 Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc.- External work -50mm dia nominal bore
Code No: 18.15.1 Providing and fixing brass bib cock of approved quality - 15mm nominal bore
Code No :18.17.1 Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 25mm nominal bore
Code No: 18.18.1 Providing and fixing ball valve (brass) of approved quality , high or low pressure ,with plastic floats complete - 15mm nominal bore
Code No :18.46.2 Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc. complete (Newwork) - 20 mm nominal bore
Code No : 18.46.3 Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (New work) - 25mm nominal bore
Code No:18.48A Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank - Circular Tank
CODE NO:31.5.1B:- Making connection of UPVC distribution branch with Upvc main of following sizes by providing and fixing tee including cutting the pipe etc., compete.-110mm dia to 160mm dia nominal bore.
EPSR CODE NO: 1.21.2 :- Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 25mm
EPSR CODE NO: 2.3.2 :- Supplying and fixing following way , single pole and neutral , sheet steel , MCB disribution board , 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar , earth bar , din bar , nterconnections , powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 8 way ,double door
EPSR CODE NO:1.27.6 :- Supplying and fixing following size / modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 12 module (125 mm x 125 mm)
EPSR CODE NO: 1.27.5 :- Supplying and fixing following size / modules , GI box per alongwith modular base & cover plate for modular switches in recess etc. as required - 8 module (125 mm x 125 mm)
EPSR CODE NO: 5.2:- Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required
EPSR CODE NO: 5.17 :- Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required
EPSR CODE NO: 1.17.1:- Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required - 1 X 1.5
EPSR CODE NO: 1.17.11:- Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required -2 x 2.5 sq.mm
EPSR CODE NO:1.17.20 :- Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required -2 x 4 sq.mm
EPSR CODE NO: 1.24.1 :- Supplying and fixing following modular switch / socket on the per existing modular plate & switch box including connections but excluding modular plate etc. as required - 5/6 A switch
EPSR CODE NO:1.24.3 :- Supplying and fixing following modular switch / socket on the per existing modular plate & switch box including connections but excluding modular plate etc. as required - 5/6 A switch
EPSR CODE NO:1.24.4 :- Supplying and fixing following modular switch / socket on the per existing modular plate & switch box including connections but excluding modular plate etc. as required - 3 pin 5/6 A socket outlet
EPSRCODE NO: 1.24.5:- Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 6 pin 15/16 A socket outlet
EPSR CODE NO: 1.35:- Installation , testing and commissioning of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS / CFL /LED lamps per fitting . Complete with all accessories including connections etc as required
EPSR CODE NO:1.45:- Installation , testing and commissioning of ceiling fan , including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper conductor , single core cable , including providing and fixing phenolic laminated sheet cover on the fan box etc as required
EPSR CODE NO: 1.33:- Supplying and fixing 3 pin , 5 A ceiling rose on the existing junction box /wooden block including connection etc as required
EPSR CODE NO: 158:- Supplying and fixing PVC batten / angle holder including connection etc.as required.
EPSR CODE NO: 1717 :- 25 A rating , 2 pole RCCB , 30mA
EPSR CODE NO: 1706:- 6 A to 32 A ratings , SP MCB , "C" curve , 10kA breaking capacity
EPSR CODE NO: 1.50.1 :- Installation of exhaust fan in the existing opening , including making good the damage , connection , testing , commissioning etc. as required - Upto 450 mm sweep
EPSR CODE NO:9.117.2:- Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance +_ 1mm ), with wall thickness 2.0 mm (+-0.2mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws , joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19 x 19 mm and 1mm (+-0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification - Extruded section profile size 42 x 50 mmsize 42x50mm.
EPSR CODE NO: NPSR :- Supplying of Energy efficient 5-star 1200 mm sweep A.C ceiling fan complete with all accessories like down rod, canopy etc with Making necessary connection cables as required etc. (Make : Orient / Usha / Crompton / Havells or Equivalent)
EPSR CODE NO: NPSR:- Supplying of Fixing of 230V, 1 x 35W LED wall bracket mounted type light fitting with suitable 20W LED lamp and necessary fixing accessories as required. Make : Philips / Bajaj or Equivalent
EPSR CODE NO: NPSR :- Supplying and fixing the 3.00m length 20mm GI connection pipe at all floor levels which include bending the pipe without any crack or breakage as U shape at top of pipe, making thread at bottom of pipe to adopt one coupling and welding the same and fixing the connection pipe with 3 nos to the wall etc complete as directed by the Engineer-in-charge
EPSR CODE NO:NPSR :- Supplying and drawing of 2runs of 7/20 aluminium PVC sheathed CTS wire for overhead House service connection between the poles along with one run of insulated steel wire used as stay separted with porcelain reels and tied with bare copper wire Make. Orbit/Kundan As approved Vide No: 150/PW/SEI/AE(p)-I/F.No:551/2016-17 dt. 20.12.2016
EPSR CODE NO: NPSR :- Supply and fixing of 20-24W LED tube light fitting.Make :Philips/havells/Wipro. Approved no.352/PW/SE-1/AE(P)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .