Construction of false ceiling, wall cladding, glass fitting and other anciliary works in extended portion of bungalow and other works under Jhargram A.I. Division at Jhargram bungalow campus under Non Plan Programme.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (b) Two Coats ii) Solvent based interior grade Acrylic Primer

M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In ground floor

Supplying and laying true to line and level Anti-Skid, FullBody, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS: 13630 [Non-modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption : E<0.5%], MOR>35 N/sq.mm in Internal area of building e.g.Toilet Block, Passage, Corridor, ccessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using [email protected] Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor / Mosaic etc with out any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth up to mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). b) In First Floor: Sizes - 600 mm x6 00 mm x 10mm with breaking strength > 1500 N

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] In ground floor (b) Area of each Granite slab above 1.00 Square meter.

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] In first floor (b) Area of each Granite slab above 1.00 Square meter.

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987; xiii) 12mm thick cleared toughened glass coforming to IS: 2553-1992 (Part-II)

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:( (C) Fully glazed single leaf reamless swing door made of anodized aluminium alloy extrusions fabrication after cutting to proper shape and size, drilling and aligning fitted with heavy duty hydraulic action floor spring with top pin assembly and fitted with inbuilt locking arrangement and all other necessary fittings, fixture, adhesives and joineries, cutting the glass to requisite shape and size mounting the edges for fitting the same with dry set neoprine/EPDM gasket.

Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge.

Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. iii) weather gasket / wool pile for door vertical.

Supplying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-incharge. for Structural Glazing/Curtain wall. Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work

Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN -1154, of approved quality of reputed brand as per direction of Eingineer-in-Charge fitted and fixed complete including all incidental charges.

Supplying, Fitting & Fixing P.V.C. Cabinet for Basin (as per drawing) of size 550 mm x 410 mm x 1770 mm made with Factory made 19 mm thick rigid pvc foam sheet comprising a co-extruded solid PVC skin and foamed PVC core (density shall not be less than 600 kg/cum) and required fixtures, fustener, adhesive, SS hinges, channel for drawer, handle, tripple keyed lock, SS screws etc. as required of approved quality.

Wall panelling with Poligranite / UV Marble sheet (made of limestone, PVC resin, stabilizers, pigments, additives etc. having marble, wood grain, solid colour etc. surface pattern, UV coated surface, excellent brightness, size of each sheet willl be 1220 mm x 2440 mm x 3.5 mm, weight 20 to 22 kgs/sheet of approved make and brand pasted directly on plastered / plastered putty surface of walls after necessary preparation of the surface with recommended / approved adhesive all complete as per direction of the Engineer-in-charge. The rate includes the cost of supply of all materials, labour in cluding preparation of wall surface and all other incidental charges thereof.

Wall panelling with Wood–plastic composites (WPCs) louvers made of 30-60% wood fiber/wood flour and remaining portion being thermoplastic(s) such as polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), or polylactic acid (PLA) and additives etc. having marble, wood grain, solid colour etc. surface pattern, UV coated surface, excellent brightness with glossy/mat finish, size of each sheet willl be 219 mm x 2400 mm x 15 mm of approved make and brand pasted directly on plastered / plastered putty surface of walls after necessary preparation of the surface with recommended / approved adhesive all complete as per direction of the Engineer-in-charge. The rate includes the cost of supply of all materials, labour in cluding preparation of wall surface and all other incidental charges thereof.

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fishwire inside the pipes and fittings and providing 50 mm dia disc of M S sheet (20SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) (b) 19mm dia 3mm thick Polythene Pipe

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fishwire inside the pipes and fittings and providing 50 mm dia disc of M S sheet (20SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) (c) 25mm dia 3mm thick Polythene Pipe

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (a) 2 x 22/0.3 (1.5 sqmm)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (b) 3 x 22/0.3 (1.5 sqmm)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (s) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (v) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (c1) 3x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC

Distn. wiring in 22/0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (i)Average run 6 mtr

Distn. wiring in 22/0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythene Pipe complete with all accessories embedded in wall to 240 V 6 A 5 pin plug point incl. S & F 240 V 6 A 3 pin Modular type Plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with ¾ Module top cover plate flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC On Board

Supplying, fitting and fixing and connecting 'HAVELLS' make FAZER NEO LED PANEL ROUND fibre, ultra slim LED panel with inbuilt driver in PC body premium aesthetics with stepped ring bezel with necessary fittings. 6 W LED 3000 K Odering Code - LHEBMCP5IW1W006

Supplying, fitting and fixing and connecting 'HAVELLS' make TRIM SLIM LED PANEL, slim junctionbox panel in matt finish, suitable for 5.08 cm (2) junction box installed with necessary fittings. 3 W LED Slim 3000 K Odering Code - LHEAATPBIV1W003

Supplying, fitting and fixing and connecting 'HAVELLS' make with necessary fittings. Flexion AC Rope 144DSTRIP Red IP65 20M Odering Code - LHEHBQPGTN6F130

Supplying, fitting and fixing and connecting 'HAVELLS' make Adiva Series Switches with necessary fittings. Adiva (White) 6AX Switch 1 Way, SAP Code - AHASXXW061

Supplying, fitting and fixing and connecting 'HAVELLS' make Adiva Series Switches with necessary fittings. Adiva (White) 16 AX Switch 1 Way, SAP Code - AHASXXW161

Supplying, fitting and fixing and connecting 'HAVELLS' make Adiva Series Sockets with necessary fittings. Adiva (White) 6A 3 pin socket, SAP Code - AHAKPXW063

Supplying, fitting and fixing and connecting 'HAVELLS' make Adiva Series Sockets with necessary fittings. Adiva (White) 6A/16A socket, SAP Code - AHAKCXW163

Supplying, fitting and fixing and connecting 'HAVELLS' make Adiva Series Support Modules with necessary fittings. Adiva (White) 1 M Fan Regulator, SAP Code - AHARFXW004

Supplying, fitting and fixing and connecting 'HAVELLS' make Adiva Series Motor Starter with necessary fittings. Adiva Classic (White) 20 A Motor Starter, SAP Code - AHASMXW201

Supplying, fitting and fixing and connecting 'HAVELLS' make Modular Combined Plates - Adiva with necessary fittings. 2 M Black, AHAPLCBV02

Supplying, fitting and fixing and connecting 'HAVELLS' make Modular Combined Plates - Adiva with necessary fittings. 3 M Black, AHAPLCBV03

Supplying, fitting and fixing and connecting 'HAVELLS' make Modular Combined Plates - Adiva with necessary fittings. 6 M Black, AHAPLCBV06

Supplying, fitting and fixing and connecting 'HAVELLS' make Modular Combined Plates - Adiva with necessary fittings. 8 M Black, AHAPLCBV08

Providing & fixing of ISI marked (IS: 15778-2007) Rigid CPVC drain water piping 6 kg/cm2 with fittings like elbo, socket, Tee etc. & support with MS hanger on ceiling or recessed in wall with chasing & plastering with 6 mm thick closed cell elastometric nitrile rubber insulation complete in all respect. 20 mm dia.

Supply, installation, testing & commissioning of suction/ discharge copper pipe line in split air conditioning unit 1.0/1.5 TR/2 TR/3 TR capacity including brazing, nitrile rubber insulation 6/9 mm thick class 'O', etc. complete as required. Copper tube 1/4"

Supply, installation, testing & commissioning of suction/ discharge copper pipe line in split air conditioning unit 1.0/1.5 TR/2 TR/3 TR capacity including brazing, nitrile rubber insulation 6/9 mm thick class 'O', etc. complete as required. Copper tube 3/8"

Fixing only fan clamp for RC ceiling as per specification after cutting the ceiling & binding with reinforcement and mending good the damages.

Supply 150 mm Sweep White Plastic Exhaust fan - Havells make.

Supply and fixing smart bright street light (36 watt) complete with all accessories to be fixed/projected from the wall of the building or on pole incl. making holes / providing clamping arrangement & necy. GI reducer as required. S& F 40 mm GI pipe (ISI-Medium ) qualiy 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded anneled copper wire and making connection as required and making mending good damages to wall including painting etc. Make: Crompton, 36 watt.

Supplying, fitting and fixing and connecting 'Orient' make antidust 1200 Mm 3 Blade Ceiling Fan with necessary fittings.

Add GST, sa applicable @ 18%

Add labour welfare Cess @ 1%

Please Enable Macros to View BoQ information