Widening and Strengthening of Narsena Nahar Pull to Avantika Devi Mandir road via Narendrapur Shafinagar in Km 9-910 to 18-400 in District Bulandshahr

Amount

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.as per Morth Spacification clause 304(B).Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement..as per Morth Spacification clause 305 Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Morth Spacification clause 401 (B) Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.as per Morth Spacification clause 404 (B) Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Providing, laying, spreading and compacting graded stone aggregate to ETA/wet mix macadam conforming to table 400-13 of MORTH specification including premixing the Material with water at OMC in mechanical mix plant with 1% Ordinary Portland Cement and 3.5% Emulsion SS-2 Stab,carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.as per Morth Spacification clause 406 S.I no 4.15 Including all taxes Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per Morth Spacification clause 502 (A0 Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects.as per Morth Spacification clause 505 (A) Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Providing and applying tack coat with bitumen VG-10 grade using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.as per Morth Spacification clause 503(i) Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Providing and laying bituminous concrete (Gr-II) with 120 TPH batch type hot mix plant using crushed aggregates from approved quarry of specified grading, premixed with bituminous binder (VG-30) @ 5.40 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.as per Morth Spacification clause 507 (B) Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads upto 2 km, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.as per Morth Spacification clause 305 S.No. 3.16 Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Construction of un-reinforced, dowl jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30(Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Cum Floter-Trimix Flooring Machine. Technical Specification Clause 1501 SI no.20.15(b) Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. P.C.C (1:3:6), as per Morth Spacification clause 1500, 1700 & 2200 Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications.as per Morth Spacification clause 1300 & 2200 S.I No 13.1 Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications as per Morth Spacification clause 1300 & 2200 S.I No 13.2 Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

PCC Grade M15 using batching plant transit mixer & Concrete pump. as per Morth Spacification clause 1500, 1700 & 2200, S.I No.13.5 Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications as per Morth Spacification clause 1300, & 2200, S.I No.13.3 Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Supply and fixing of 600 mm dia NP3 type Hume Pipe S&S in position including labour and T&P etc. required for proper completion of work. Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Supply and fixing of 900 mm dia NP3 type Hume Pipe S&S in position including labour and T&P etc. required for proper completion of work. Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Supply and fixing of 450 mm dia NP3 type Hume Pipe S&S in position including labour and T&P etc. required for proper completion of work. Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Supply and fixing of 350 mm dia NP3 type Hume Pipe S&S in position including labour and T&P etc. required for proper completion of work. Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes..but Including cost of, all material,bitumen labour, T&P, royality , all taxes and labour cess complete. S.I No. 22.02 New Item Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Providing and laying of hot applied thermoplastic compound 15 mm thick for repeated bar marking including reflectorising glass beads @ 250 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.but Including cost of, all material,bitumen labour, T&P, royality , all taxes and labour cess complete. For Repeated bar .S.I No. 22.03 New Item Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Shripal Singh

S F INFRA PROJECTS