S/F of 2 Nos. High Mast Light with 16 mtr G.I pole and 12X200 Watt L.E.D. Flood Light in Dist.Shrawasti

S/F of 16 mtr high mast shaft of approved make with rising system, hot dip Glavanized inside & outside, heaving sheet thinkness 4 mm, Top dia minimum 150mm, bottom dia 360mm, and base plate 32mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminares & its control gear boxes, 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6mm dia, double drum winch, including making suitable foundation as per manufature drawing & site requirement along with foundation bolts nuts, washers, anchor plates etc... competeee in all respect .

S/L of Main wire with 25 sqmm 3-1/2 core alluminium conducter P.V.C insulated armoured served sheathed cable 1100v grade …...complete in all respect.

S/F of factory wired integral LED flood light luminaires with die cast aluminium housing with toughend glass UV stabilized PC cover and lenses built with mandatory driver set suitable for 170 to 200 watt Confirming to I.P 66 protection and above protection compleate in all respect.

Supply and wiring of submain with two number 6 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire etc., complete in all respect.

S/F of single unit LED avation light----------- complate.

S/F of brass of nickle plated compression glandInsulated with tape and making connection etc.complete in all res.

S/F of pipe type copper tin plated cable lead……………….. All complete )

Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra)

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.

Supply and fixing 40 A TPN automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.