REPAIR/MAINT INCL REPLACEMENT OF OLD UNSV CEMENT PIPE LINE WITH DI PIPE AND OTHER MISC WORKS SUCH AS COLUMN PIPE UNDER OH TANK AT OTM/MD ACCN OF MGSF AREA UNDER GE E/M LUCKNOW.

Amount

Supply, laying, jointing and commissioning & testing of ductile iron water mains with flanged ends, centrifugally cast of class K-9, and wall thickness 6mm complete all as specified and directed of 100mm bore sizes (Note- rubber gas kit joints and DI specials / fitting shall be measured and paid separately)

All as item No 1 above but 150mm

All as item No 1 above but 200 mm

S&F in repair cast iron pipes spigot and socketed ends centrifugally casted class LA 'ISI marked' in any length laid in trenches of the 80 mm nominal bore sizes including taking out of exisitng u/s CI pipe & removed from site to AGE E/M Store all as specified and directed by EIC. (Note - Excavation, earth work and joint shall be measured and paid separately).

All as item No 4 above but 100 mm nominal bore.

All as item No 4 above but 150 mm nominal bore.

All as item No 4 above but 200 mm nominal bore

S&F in repair CI pipes with flanged ends centrifugally casted class 'A' 'ISI marked' in any length laid in trench / floor / on pillars of the 80 mm nominal bore sizes including taking out of existing u/s CI pipe & removal from site to AGE E/M store complete all as specified and directed by EIC :-

All as item No 8 above but 100 mm nominal bore.

All as item No 8 above but 150 mm nominal bore.

All as item No 8 above but 200 mm nominal bore

S&F in repairs cast iron specials 'ISI marked' for pressure water mains up to 150 mm bore spigot and socket, Tee, pieces, single or double branch connection or collar etc. compleet all as specified and directed. (Note - Excavation and earth work shall be measured and paid for separately).

All as item No 12 above but for 200 to 300 mm bore for pipe line/header

S&F in repair cast iron connecting pieces one end flanged and other socket or spigot or bell mouth or any size taper upto 300 mm bore complete all as specified and directed. (Note - Joints excavation and earth work shall be measured and paid separately)

M&L in repair run lead joints for spigot and socket ends for fittings/water mains in repair for new/old pipe lines and fittings of the 80 mm bore size complete all as specified and directed :-

All as item No 15 above but 100 mm bore.

All as item No 15 above but 150 mm bore.

All as item No 15 above but 200 mm bore.

M&L in repairs flanged joints complete with rubber or fibre board gasket for new/old pipe lines including nut bolts & washers etc. of the 80 mm bore sizes of water mains / fittings complete all as specified and directed :-

All as item No 19 above but 100 mm bore

All as item No 19 above but 150 mm bore.

All as item No 19 above but 200 mm bore.

Taking up cast iron main with spigots & socket ends complete all as specified and directed for the 80 mm bore sizes. (Note - Excavation earth work shall measured and paid separately) :-

All as item No 23 above but 100 mm bore.

All as item No 23 above but 150 mm bore.

All as item No 23 above but 200 mm bore.

Cutting in position cast iron water mains for insertion of new tee for branch connection all as directed for the 80 mm bore size :-

All as item No 27 above but 100 mm bore.

All as item No 27 above but 150 mm bore.

All as item No 27 above but 200 mm bore.

Burning out lead joint in position including removing of old lead all as directed for the 80 mm bore sizes :-

All as item No 31 above but 100 mm bore.

All as item No 31 above but 150 mm bore.

All as item No 31 above but 200 mm bore.

Cleaning & relaying serviceable water mains CI/DI including removing of all type of scale or blockage for the 80 mm bore size (Joints, excavation returning filling and removal of soil shall be measured and paid separately) complete all as specified and directed :

All as item No 35 above but 100mm bore.

All as item No 35 above but 150mm bore.

All as item No 35 above but 200mm bore.

Dismantling existing flanged joints for the water mains and fittings complete all as specified and directed for the 80 mm bore sizes :-

All as item No 39 above but 100 mm bore.

All as item No 39 above but 150 mm bore.

All as item No 39 above but 200 mm bore.

M&L short pieces of CI/DI pipe duly thread and both end flanged as per site requirement upto 60 cm for the 80 mm bore sizes (Note- Length of pipe more than 60 cm will be measured and paid in the respective item of CI/DI pipe.):-

All as item No 43 above but 100 mm bore.

All as item No 43 above but 150 mm bore.

All as item No 43 above but 200 mm bore.

S&F GI pipe medium grade with all fittings and fixed complete to wall/ceiling or laid in floor /trenches etc. complete all as specified and directed (Note - Excavation & earth work shall be measued paid seperately) of the 15 mm bore sizes make : TATA / Jindal / Prakash :-

All as item No 47 above but 20 mm bore.

All as item No 47 above but 25mm bore.

All as item No 47 above but 40mm bore.

All as item No 47 above but 50mm bore.

All as item No 47 above but 80mm bore.

Taking out steel water tubing and connections including cleaning, removal all type of blockage and rust of serviceable pipes etc complete all as specified and directed for the 15 mm bore sizes (Note - Excavation &earth work shall be measured and paid seperately) :-

All as item No 53 above but 20 mm bore.

All as item No 53 above but 25 mm bore.

All as item No 53 above but 40 mm bore.

All as item No 53 above but 50 mm bore.

All as item No 53 above but 80 mm bore.

Fixing only Steel Tubing & connection with all fittings in old/new location laid in trenches/floor/wall complete all as specified and directed (Note - Excavation & earth work shall be measured and paid seperately) of the 15 mm bore sizes :-

All as item No 59 above but 20 mm bore.

All as item No 59 above but 25 mm bore.

All as item No 59 above but 40 mm bore.

All as item No 59 above but 50 mm bore.

All as item No 59 above but 80 mm bore.

Cutting in position existing steel tubing for alteration or repair including screwing/threading complete all as directed of the 15 mm bore size:-

All as item No 65 above but 20 mm bore.

All as item No 65 above but 25 mm bore.

All as item No 65 above but 40 mm bore.

All as item No 65 above but 50 mm bore.

S&F in replacement gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications of the 15 mm bore sizes complete all as specified and directed.

All as item No 70 above but 20 mm bore.

All as item No 70 above but 25 mm bore.

All as item No 70 above but 40 mm bore.

All as item No 70 above but 50 mm bore.

Drilling &Tapping cast iron water mains in postion for branch connection of the 15 mm bore sizes :-

All as item No 75 above but 20 mm bore.

S&F (in repair) connection & testing sluice valve 'ISI marked' both ends flanged and drilled cast iron body class PN-1.0 conforming to IS-14846/2000 complete with gun metal spindle including necessary nut bolts etc and taking out old unserviceable sluice valve complete all as specified and directed of the 80 mm bore sizes :- NOTE: For those sluice valves which are fixed with pillar of over head tank work involve such as breaking of RCC/lead flange joints will be deemed to be included in the quoted rates, contractor will also repair the demaged floor etc.to match with existing (Joints shall be measured & paid separately) Make - Kirloskar / Upadhyay.

All as item No 77 above but 100 mm bore.

All as item No 77 above but 150 mm bore.

All as item No 77 above but 200 mm bore.

Supply only lead pig complete all as specifed and directed.

Supply only lead wool complete all as specifed and directed.

Supply only white lead complete all as specifed and directed.

Supply only spun yarn dressed complete all as specifed and directed.

Supply only cotton waste complete all as specifed and directed.

Supply only rubber insertion sheet 3 mm thick complete all as specifed and directed.

Supply only rubber insertion sheet 6 mm thick complete all as specified.

S&F in replacement Gun metal spindle with qutku "U" thread suitable for any make /model sluice valve of the 200 mm bore sizes :-

All as item No 88 above but 150 mm bore.

All as item No 88 above but 100 mm bore.

All as item No 88 above but 80 mm bore.

S&F in nreplacement of stuffing box of sluice valve complete with gland plate nut bults & gland packing etc. complete all as specified and directed of the 200 mm bore sizes :-

All as item No 92 above but 150 mm bore.

All as item No 92 above but 100 mm bore.

All as item No 92 above but 80 mm bore.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation of pillar/wall complete all as specified and directed.

M&L for valve pit masonery chamber of size 650 x 650 x 650 mm (internal dimension) with MS plate 3 mm thick top cover locking arrangement 50 mm lock - 01 No including painting with two coat of synthetic enamel paint over a coat of red oxide primer including excavation earth work, PCC plaster etc complete all as specified and directed and shown on drawing.

All as item No 97 above but internal dimension 900 x 900 x 900 mm.

All as item No 97 above but internal dimension 1200 x 1200 x 1000 mm.

M&L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping in supporting pillar for pipe wall etc wall complete all as specified and directed.

M&L brick work with sub class 'B' bricks buit in CM 1:6 using old size bricks straight or curved on plan exc. 6 M mean radius complete all as specified & directed.

M&L rendering 10 mm thick with CM 1:6 on fair face of brick or concrete surfaces complete all as specified and directed.

M&L fabricated MS work as in bands, straps supports or stay for pipe inlcluding bolts if required conforming to Fe-410.0 or Fe-310.0 complete all as specifed and directed.

Excavation in trenches n.exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for laying / taking out water supply pipe line in soft/loose soil, taking out excavated material, forming bottom etc complete all as specified and directed..

Returning filling in including,spreading, levelling watering and well ramming in layer in n.exc 25 cm in soft /loose soil all as specified directed.

Removing excavated material n.exc 50 mtr and deposting where directed at a level n.exc. 1.5 mtr above starting point as in soft/loose soil complete all as specified and directed.

Cutting of road (in hard/ dense soil ) for laying pipe line or repair to pipes / lead joints etc .of any size upto 01 mtr. Depth and getting out incluiding forming bottom surface to required level and making good the road as per existing all as specified and directedby EIC.

Drilling/boring (horizontally) upto 150 mm bore by penumatic tool or horizontal boring / drilling machine under the existing road (max. 10 mtr. In width) suitable for passing GI / CI / DI tubing complete all as specified and directed by EIC.

Sanjai sales and services

M/S Nav Jyoti Enterprises

M/s I C Sharma and sons