Electrical Wiring and associated works for Burhar Central Hospital and Regional Store of Sohagpur Area

Electrical wiring and associated works for Burhar Central Hospital and Regional Store of Sohagpur Area, SECL

Part-A Electrical wiring and associated works for Burhar Central Hospital of Sohagpur Area, SECL (1.10) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (1.10.1)

(1.14) Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required, (1.14.1) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.

(1.14) Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(1.14.2) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

(1.17) Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (1.17.2) 2 x 1.5 sq. Mm

(1.17) Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required, (1.17.11) 2 x 2.5 sq. Mm,

(1.21) Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (1.21.1) 20 mm

1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (1.21.3) 32 mm, COST FOR 50 meters

(1.23) Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (1.23.1) 5/6 A switch

(1.23) Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (1.23.3) 15/16 A switch

(1.23) Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (1.23.4) 3 Pin 5/6 A Socket Outlet

(1.23) Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (1.23.5) 6 pin 15/16 A socket outlet

(1.24) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(1.24.1)

(1.24) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required (1.24.3) 15/16 A switch

(1.24) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required, (1.24.4) 3 pin 5/6 A socket outle

(1.24) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required, (1.24.5) 6 pin 15/16 A socket outlet

(1.25) Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

(1.27) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required., (1.27.2) 3 Module (100mmX75mm)

(1.27) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required., (1.27.3) 3 Module (100mmX75mm)

(1.27) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required., (1.27.4) 6 Module (200mmX75mm)

(1.27) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required., (1.27.5) 3 Module (100mmX75mm)

(1.27) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required., (1.27.6) 12 Module (200mmX150mm

(1.30) Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connection, painting etc. as required.

(1.32) Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc. as required

(1.33) Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connection etc as required.

(1.40) Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper cable direct on the wall with PVC clips etc. as required.

(1.57) Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connection, painting etc. as required.

(1.58) Supplying and fixing PVC batten/ angle holder including connection etc. as required

(2.2) Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (2.2.1) 100 A, 16 KA

(2.2) Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (2.2.5) 200 A, 25 KA

(2.3) Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator), (2.3.1) 6 way, Double door.

(2.3) Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator), (2.3.2) 8 way, Double door

(2.3) Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (2.3.3) 12 way, Double door

(2.3) Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (2.3.4) 16 way, Double door

(2.5) Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 As tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.),(2.5.1) 4 way (4 + 12), Double door

(2.5) Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 As tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (2.5.2) 8 way (4 + 24), Double door

(2.10) Supplying and fixing 5 A to 32 As rating, 240/415 volts , 10 kA , "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (2.10.1) Single pole

(2.10) Supplying and fixing 5 A to 32 As rating, 240/415 volts , 10 kA , "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (2.10.3) Double pole

(2.10) Supplying and fixing 5 A to 32 As rating, 240/415 volts , 10 kA , "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (2.10.4) Triple pole

(5.2) Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. Details of cost for one Set.

Supplying erection and testing of approved make Exhaust fan heavy duty complete with motor, mounting frame, blades, AC 230-250 volts with connection and including frame bolt/ anchor hole fastner etc. complete finished as 380 mm sweep 900 RPM

Supplying erection and testing of approved make electrical wall mounted fan, 400mm, 1280 RPM

Supplying erection and testing of approved make LED Ceiling Light, Surface mounted, 20 Watt

Supplying erection and testing of approved make LED panel light fitting (2' X 2') 36 Watt

Part-B Electrical wiring and associated works for Regional Store of Sohagpur Area, SECL (1.10) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (1.10.1)

(1.14) Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required, (1.14.1) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.

(1.14) Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(1.14.2) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

(1.17) Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required, (1.17.11) 2 x 2.5 sq. Mm,

1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (1.21.3) 32 mm, COST FOR 50 meters

(1.24) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(1.24.1)

(1.24) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required (1.24.3) 15/16 A switch

(1.24) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required, (1.24.4) 3 pin 5/6 A socket outle

(1.24) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required, (1.24.5) 6 pin 15/16 A socket outlet

(1.25) Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

(1.27) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required., (1.27.2) 3 Module (100mmX75mm)

(1.27) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required., (1.27.3) 3 Module (100mmX75mm)

(1.27) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required., (1.27.4) 6 Module (200mmX75mm)

(1.27) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required., (1.27.5) 3 Module (100mmX75mm)

(1.27) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required., (1.27.6) 12 Module (200mmX150mm

(1.57) Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connection, painting etc. as required.

(1.58) Supplying and fixing PVC batten/ angle holder including connection etc. as required

(2.3) Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator), (2.3.2) 8 way, Double door

(2.3) Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (2.3.3) 12 way, Double door

(2.3) Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (2.3.4) 16 way, Double door

(2.5) Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 As tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.),(2.5.1) 4 way (4 + 12), Double door

(2.10) Supplying and fixing 5 A to 32 As rating, 240/415 volts , 10 kA , "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (2.10.1) Single pole

(2.10) Supplying and fixing 5 A to 32 As rating, 240/415 volts , 10 kA , "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (2.10.3) Double pole

2.10 Supplying and fixing 5 A to 32 As rating, 240/415 volts , 10 kA , "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.10.5 Triple pole and neutral, Details of cost for one each

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information