TCMC - Providing Deep Borewell and Fixing of light,fan SS Rack in Ward No.13 at Tambaram City Municipal Corporation Zone II

Charges for conducting Geophysical survey etc direction by the Departmental officers

Drilling of 150mm dia bore wells in over burden soil including labour charges for insertion of casing pipes

Supply of 150 mm (Casing Shollow depth) 1.2 PVC Casing pipe with exces duty as per IS 12818/1992 (TWAD Rate 2021-22 Page No19)

Drilling of 150mm dia borewells in hard rock areas anywhere in Tamil Nadu including trasportion to the worksite in hard rock areas and developing the borewells

Labour charges for inserting casing pipes assembly (With slot or without slot) in the drilled hole including welding the joint etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineer (TWAD Rate 2021-22 Page No227)

Supply and delivery 15 x 125 of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continues rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 %

Supply and delivery of 2 HP capacity of single phase submersible pump set panel board with two level gourd with auto start duty 20lpmx125 Mt head, including cost and conveyance of material etc., complete as standard specification as per TWAD Schedule of rate 2015-16 Page No.112

Supply and fixing of following PVC, GI and Electrical Accessories including all necessary materials and labour charges etc complete

HDPE pipe 50mm/ 38mm

32mm SS Nipple

32mm GI X Nipple

32mm GI Bend

32mm MS Clamp

32mm PVC Pipe

20mm PVC Pipe

32x20mm PVC Reduser

20mm GI Pipe

20mm GI Tee

PVC Tap

2000 Ltr. Capcity HDPE Water Tank

16mm Nylon Rope

32Amps MCB

32 Amps Fuse Unit

Tube Light

2 of 4 Sqmm wire SD 45

2.5 Sqmm Flat Cable

Labour charges for erection of Submersible pumpet in bore well/ Open well including fixing submersible cable with proper clamps upto to the starter to required depth and also fixing of riser pipes to the required depth calves erection clamps , pusher gauge upto the exterior wall of pump room and erection of panel Board consisting of TPIC switches, voltmeter, Ammeter, Capacitor single preventer and laying and jointing the cable and twin earthling as per IE rules including providing bed block etc., and operating the pumps and trial run 10 days including singing of completion of reports as required by EB authorities TWAD Board Schedule Item No.17C , Page no.230 2015-16

Construction of inspection chamber of size 60 cm x 60 cm x 60 cm with 75mm thick RCC loose slabs covering in C.M. 1:2:4 mix including necessary reinforcement and earth work excavation for foundation wth 23 cm thick concrete bed using 40mm B.J. concrete in CC 1:4:10 for foundation brick work in CM 1:6 for chamber as directed during theexecution including plastering with CM 1:3, 12mm thick, benching and channelly etc. complete for 1 No.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supply and Delivery of SS Rock 5 ft x 4ft including cost and conveyance of material etc., complete as standard specification