Construction of RCC office Building G plus 2 for DICC Morigaon

Amount

CIVIL_WORK: MACHINE_DRIVEN_PILE: Providing cast-in-situ machine driven reinforced cement concrete piles of required bore diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately) (A) UNIFORM PILE (I) Concret Garade M20 (iii) Pile dia 400 mm.

Extra for boring specified diameter pile in high sub-soil water level requiring use of drilling mud and extra cement. (iii) 400 mm dia

Empty boring for specified diameter piles from ground level to cut-off level. (d) Pile Dia 400 mm

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc) (A) TMT bar made of Primary producer (From Primary producer).

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 3 sand :6 coarse aggregate by volume.

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. (a) 100mm thick

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine. Using admixture, plasticiser (b) M20 grade concrete or Prop. 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work (a) Using 25mm thick plank

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (a) In Sub-structure upto plinth level including dewatering if necessary. In proportion 1:4

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately). (A) 112mm thick brick wall. (a) In cement mortar in proportion 1:4

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (i) Normal range (Sizes 300 mm x 300mm and above). (a) Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate.

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). (b) Executive range Somany/ Orient/Nitco/Asian Make i) Of size 200mm x 300mm and above.

Providing vitrified floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) (a) Normal range Marbonite/ Make (ii) Of size 600mm x 600mm and above

18 mm thick Marble stone slab flooring of sizes 1200 x 1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels. (i) Dungri slab

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (b) In cement mortar 1:4

Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) Rincs cool top roofing sheet as directed by the Departement. (iv) 0.60 mm thick

Providing Pre Painted Galvalume Sheet (PPGL) accessories ( Ridges / Valley / Gutter / Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iv) 0.60 mm thick

Providing wood work in in frame (chowkaths of doors, windows etc and other similar works fixed in position with cc or brick masonry etc. (a) With sal wood

Providing fitting and fixing stainless steel (grade- 304) railing made of hollow tube, plate etc. including welding, grinding , polishing, complete.

Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm) with necessary screws (other fittings to be measured and paid separately). (A) With Teak wood / Sissu wood. (i) 40 mm thick.

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. (a) Decorative type face panel and block board core. (iii) 30 mm thick.

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. (I) Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C.

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a) 2 Track sliding window (iii) 5mm coloured glass

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (b) 5 Track sliding window. (iii) 6mm coloured glass

Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (i) 6mm clear glass

Providing, fitting and fixing anodised aluminium hollow section of approved brand (Indal section 9210) of size 63.50mm x 38.10mm x 2.5mm thick for aluminium frame partition wall, with a maximum spacing of frame 1.20m for horizontal/vertical member including aluminium cleat 32mm x 50mm x 4mm thick and fixing of glass panes and pre-laminated board with tapper cleat 20mm x 15mm x 1.2mm thick fixing glass panes with rubber gusket, screws, etc. as directed by the department at all levels. (v) 12mm thick pre-laminated board.

Providing two coats of acrylic water based wall putty/ wall filler of Nerolac over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture ( Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a) Acrylic Emulsion Paint approved brand and manufacture (Nerolac).

Applying one self-priming coat of acrylic emulsion coating of Unicem "Rakshak" brand by thinning 1ltrs of paints with 1ltrs of water over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department.

Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter , sand papering and knotting. (a) With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i) Surfaces over 100mm in width or girth. (a) General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. (a) With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). (i) Surfaces over 100mm in width or girth.

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) (a) Sliding door bolts (i) 300mm x 16mm.

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) (b) Tower bolts (i) 300mm x 12mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) (c) Door handles (i) 75mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) (i) Hydraulic door closure

Supplying, fitting and fixing drapery rods along with all accessories in doors, windows and other openings complete as specified and directed by the departmentb at all levels. (A) MAC Drapery rod (vi) Silk line

Supplying, fitting and fixing MAC blinds horizontal and vertical complete as specified and directed by the department at all levels. (A) Vertical blinds (b) Blackout (iii) 75 mm

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level). (a) From Primary Producer: TATA/ SAIL/Esser Steel/ Jindal steel/ Shyam Steel/ RINL. (i) TMT Corrosion resistant steel (CRS) reinforcement bar

Providing, fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. a) TATA make Circular Hollow section- CHS of Grade YST-310 conforming to I.S. Specification : 1161-1998

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. (i) 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. (a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

FIRE-FIGHTING WORKS- Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG)

SANITARY_WORKS -EUROPEAN TYPE WATER CLOSET - Providing, fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) (A) Parryware make (a) White (i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover).

PVC FLUSHING CISTERN - Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) (i) Parryware make (a) White (vi) Slimline Standard (Cat No.C8297)

URINAL - Providing, fitting and fixing vitreous china flat back type lipped front urinal basin of with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (A) Parryware make (a) White (ii) Aquaseal (Cat. No.C0508)

SQUATING PLATE URINAL - Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (A) Parryware Make (i) White (Cat. No. C0503)

WASH BASIN - Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately). PEDESTAL BASIN (C) Jaquar Make (a) White (iv) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380)

MIRROR - Providing, fitting and fixing Decorative Mirror complete as directed and specified. (A) Parryware Make (b) Size 600mm x 450mm

SHELF - Corner glass shelf with brackets of Jaquar Make (a) Jaquar Make- Continental (Cat.No.ACN-1173)

SOAP TRAY, SOAP DISH, LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER - Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make (i) Recess SP & SG dish (Cat.No. C9935)

TOWEL RAIL - Providing, fitting and fixing CP towel rail complete as directed and specified. (a) Jaquar make (i) Continental 300mm for wash basin (Cat.No. ACN-1101N)

WASTE COUPLING - Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (a) Jaquar Make (i) 32mm (HT/FT) (Cat.No.ALD-705 / 709)

PVC PIPES, BENDS, JUNCTIONS, TEES, ETC. - Supplying, fitting and fixing I.S.I marked or similar approved PVC pipe including bolts and nuts and other fittings as required and complete at all levels including below G.L as directed and specified. (a) In exposed surfaces or in trenches. (i) 110 mm

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. (b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

Supplying, fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

Supplying, fiting and fixing PVC Plain single tee with door of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

Supplying, fiting and fixing PVC single ‘Y’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (i) 110 mm dia.

GRATING - C.P. Grating (ii) 110 mm dia

MANHOLE COVER - Providing, fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 38 Kg. weight complete as directed and specified

SOAK PIT: - Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

PPR PIPE - Supplying, fitting and fixing SFMC (SAVOIR-FAIRE MANUFACTURING CO. PVT.LTD.) brand 3 layered (outer green coloured,UV Stabilised,middle black coloured and inner white coloured (with antimicrobial property) fusion welded P.P.R (Polypropelene Random Co-Polymer) pipes of following size with all necessary fitting such as bend, tee, elbow,reducer,plug and clamp etc. complete at all levels as directed and specified. (i) In exposed surface or trenches (a) 16 mm OD (PN-16) SFMC brand 3 layer P.P.R. pipe

PPR PIPE - Supplying, fitting and fixing SFMC (SAVOIR-FAIRE MANUFACTURING CO. PVT.LTD.) brand 3 layered (outer green coloured,UV Stabilised,middle black coloured and inner white coloured (with antimicrobial property) fusion welded P.P.R (Polypropelene Random Co-Polymer) pipes of following size with all necessary fitting such as bend ,tee, elbow,reducer,plug and clamp etc. complete at all levels as directed and specified. (i) In exposed surface or trenches (b) 20 mm OD (PN-16) SFMC brand 3 layer P.P.R. pipe

PPR PIPE - Supplying, fitting and fixing SFMC (SAVOIR-FAIRE MANUFACTURING CO. PVT.LTD.) brand 3 layered (outer green coloured,UV Stabilised,middle black coloured and inner white coloured (with antimicrobial property) fusion welded P.P.R (Polypropelene Random Co-Polymer) pipes of following size with all necessary fitting such as bend ,tee, elbow,reducer,plug and clamp etc. complete at all levels as directed and specified. (i) In exposed surface or trenches (e) 40 mm OD (PN-16) SFMC brand 3 layer P.P.R. pipe

SEPTIC TANK - Construction of Septic tank - 50 Users.

INTERNAL_WATER_SUPPLY_WORKS - PIPING - Supplying, fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (b) 40 mm dia (Medium) (i) Using Tata make

PIPING - Supplying, fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (e) 20mm dia (Medium) (i) Using Tata make

PIPING - Supplying, fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (f) 15 mm dia (Medium) (i) Using Tata make

BIB COCK - Supplying, fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P. pipes will be measured separately). Essco make (Delux/Sumthing spl./Tropical) (a) Bib cock short body.

BIB COCK - Supplying, fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P. pipes will be measured separately). Jaquare make (a) Continental /Clarion (iii) 2-Way bib cock

BIB COCK - Supplying, fitting and fixing polymer bib cock (15mm dia) of Polymer Prayag make directed and specified. (G.I. & C.P pipes will be measured separately) (a) Standard

STOP COCK - Supplying, fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified. (G.I. & C.P pipes will be measured and paid separately). Jaquar (a) Continental / Clarion (ii) 15mm dia (Angular stop cock with long thread )

PILLAR COCK - Supplying, fitting and fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Jaguar make (a) Continental

PILLAR COCK - Supplying, fitting and fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Elbow action pillar cock (Agmeco) (a) MS-481/ Regular.

SINK COCK - Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately). (i) Sona brand (a) Sink cock upper/ lower spout 15mm

SINK COCK - Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately). Marc brand (a) Oriental Series - Sink cock with swivel spout

VALVE - Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. (b) 40 mm dia.

VALVE - Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. (d) 20 mm dia.

VALVE - Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. (e) 15 mm dia.

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes. (I) 2000 Lt capacity (a) Sintex make

Labour for erecting and placing PCVC Tank complete as directed. (a) 2000 litre capacity

INTERNAL_ELECTRIFICATION : Wiring for light/ fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete. (i) Short Point upto 3.00 metre length.

Wiring for light/ fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete. (ii) Medium Point upto 6.00 metre length.

Wiring for light/ fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete. (iii) Long Point upto 10.00 metre length.

Wiring to 5 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. (i) Short Point upto 3.00 metre length.

Wiring to 5 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. (ii) Medium Point upto 6.00 metre length.

Wiring to 5 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. (iii) Long Point upto 10.00 metre length.

Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 2 mm thick 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. (i) Short Point upto 3.00 metre length.

Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 2 mm thick 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. (ii) Medium Point upto 6.00 metre length.

Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 2 mm thick 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. (iii) Long Point upto 10.00 metre length.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Wiring system. With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 10 sq. mm. + earth continuity with 2 x 6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 16 sq. mm. + earth continuity with 2 x 10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of the department.

Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 3 module

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 6 module

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 12 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 3 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 6 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 12 module

Supplying with fitting fixing of blank plate single in modular switch system, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connection as per direction of department.

FITTING & FIXTURES: Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED round fittings complete with Shade, back plate including connection cable, as approved by the Deptt.s etc. as required. LED Round Light, 4W

Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED ceiling light fittings complete with Shade, back plate including connection cable, as approved by the Deptt.s etc. as required. LED Ceiling Light 12W

Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED wall light fittings complete with Shade, back plate including connection cable, as approved by the Deptt.s etc. as required. Linear LED Tube 6W

EARTHING: Installation of earth station with 40mm dia and 4.5 mtr. long GI pipe with necessary GI reducing socket 40mmx20mm size locking arrangement with hinged cover plate, funnel, GI nuts, thorough bolts etc.for putting pipe and refitting with necessary enclosure on the top etc. as required complete.

Extra for using salt 5Kg and charcoal 64 Kg. for pipe earth electrode as required.

Supplying and laying with 6 SWG GI earth wire at 0.50 mtr. below ground level or conductor earth electrode including soldering, excavation work and refilling etc. as required complete.

Supply, installation & testing of Copper Plate earth station with 600 mm x 600 mm x 6 mm heavy duty copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

CEILING_FAN: Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make). Premium model 4-Star 1200 mm Sweep (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make)

Supplying, fitting & fixing of ceiling fan regulator including connection etc. complete as required. Electronic type

EXHAUST_FAN: Supplying including fitting & fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.) as required complete and as directed by the Department. Power Flow 225 mm sweep (ORIENT make)

AC_WORK: Supplying with installation testing and commissioning of Hi -- wall 5 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with copper pipe and electrical connection cable, as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department. 2 Ton capacity. Daikin make

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make). 5.0 KVA Automatic Input 90-280 V Out put 200-240 V

Supplying with fitting and fixing of Single Phase Modular Motor Starter switch of the following specification complete including making necessary connection as specified and directed by the deptt. Overload Relay Range 16 - 25 Amps in 3 Module

Cost for Iron framing and Stablizer etc

MCB/MCBDB/RCCB_ETC.: Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc. fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make. 12 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make. 4way TPN (4+12) double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make. 6way TPN (4+18) double door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C-Series (Schneider MG, legrand, Hager make). 6-32A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300mA sensitivity 4P RCCB. (ABB, Schneider MG, legrand, Hager make). 40A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300mA sensitivity 4P RCCB. (ABB, Schneider MG, legrand, Hager make). 80A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 30mA sensitivity DP RCCB. (ABB, Schneider MG, legrand, Hager make). 40A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C-Series (ABB, Schneider MG, legrand, Hager make). 80A

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 35/36 KA 415V 50 Hz 3P MCCB (ABB(S6), Schneider, legrand, Siemens, L&T D-shine make). 315A

Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider, legrand, L&T make). 250A

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make). Core - 3 & 1/2 A2XWY A2XFY. 120.00 Sq.mm 3&1/2 Core U.G. cable in 65mm dia medium duty G.I. pipe.

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make). Core - 3 & 1/2 A2XWY A2XFY. 70.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty G.I. pipe

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make). Core - 3 & 1/2 A2XWY A2XFY. 50.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty G.I. pipe

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make). Core - 3 & 1/2 A2XWY A2XFY. 35.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty G.I. pipe

Cost of meter with meter testing and supervision charge etc.

Supplying, installation testing and commissioning of the following rating Cast Resin Dry with Off-Circuit Tap Links indoor / out door type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure. 100 KVA, 50Hz.11/0.433 KV.dry transformer with Off Circuit tap links.

Glow Sign Board

Load Security

DEEP_TUBE_WELL: Preparing of site for placement of drilling rig including excavation of mud pit, circulation drain,collection chamber etc.all complete as directed.

Movement of rig to drilling site including cost of POL all complete as directed.

Transportation of ancilary equipment, camp materials, welding set, rig accessories etc. including cost of POL all complete as directed. (a) For less than 100.00 Km

Transportation of ancilary equipment, camp materials, welding set, rig accessories etc. including cost of POL all complete as directed. (b) Beyond 100.00 Km

Transportation of all store materials like pipe, strainer, cone, socket, clamp, bentonite, etc. including cost of POL all complete as directed. (a) For less than 100.00 Km

Transportation of all store materials like pipe, strainer, cone, socket, clamp, bentonite, etc. including cost of POL all complete as directed. (b) Beyond 100.00 Km

Transportation of air compressior of Kirloskar make 540 CFM, 10.5 kg./sq cm with all accessories including the cost of POL all complete as directed. (a) For less than 100.00 Km

Transportation of air compressior of Kirloskar make 540 CFM, 10.5 kg./sq cm with all accessories including the cost of POL all complete as directed. (b) Beyond 100.00 Km

Construction of temporary accomodation and low cost sanitary facility for drilling staff including cost of camp materials viz. cots, table, chairs, umbrellas, dresses, safety halmets, etc. and dismentling the accomodation after completion of the work all complete as directed.

Providing water supply facilities at drilling all complete as directed. (a) By installing 1 No. of Singur Hand Pump.

Drilling with drilling bit in over burden portion of soil formation including of soil sample at every 3m depth of wherever there is change of strata in sample box with distinguish mark up to depth of rock formation and withdrawing the drill bit for lowering as directed with 245mm/305mm dia drill bit.

Casing and sinking/lowering of MS pipe 200mm dia including cost of pipe and labour charges for cashing, welding the joints and sinking by drilling Rig in position all complete.

Drilling with drilling rig using DTH hammer in all classes of rock including collection in sample at every 3 meter depth of boring or wherever there is change of strata in sample boxes with distinguishing mark up to a required depth of boring breaking rock fracture for desired discharge. Withdrawal drill rod/bit finishing the bore hole by ramming up to a required dia minimum 150mm to the bottom & washing the well including testing the yield and draw of the well and submission of all report and litho logy of well as directed by the E.I.C.

Developing of the DTW with air compressor, make Kirloskar/Cumins all complete as directed.

Supplying and packing pea gravel around the periphery of casing including screening, washing etc. all complete as directed.

Supplying, fitting, fixing MS clamp of size 15 mm thick and 150 mm width having projection of 300 mm and three holes of 20 mm dia for clamping the plates by 16 mm dia hexagonal bolts of length 75 mm and nuts on both sides encircling the column pipe including two coat of enamel paint over one priming coat of different dia all complete as directed and specified. (c) 200 mm dia

Supplying, fitting and fixing suction pipes (plain/ bevel ended), conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casting pipes complete as directed. (I) G.I. Pipe (a) TATA/SAIL (medium) (sockets should be welded to the pipes) (iv) 50 mm diameter

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) (v) 50 mm diameter

Supplying including installation of submersible type water supply fitting & fixing of water supply motor pump set with all accessories including panel board on C.C. Foundation of Proporation 1:2:4 jammed with M.S. Nuts and Bolts , wire rope submersible cable without suction G.I. Pipe including making necesary connection etc as reqd. complete . (4) 3 H.P. Three Phase

UP_GRADATION_OF_BOUNDARY_WALL_WITH_GATE: Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels

Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). (B) In super structure (b) M20 grade concrete or Prop. 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work (a) Using 25mm thick plank

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc) (b) Other ISI approved TMT reinforcement bar

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately). (A) 112mm thick brick wall. (a) In cement mortar in proportion 1:4

20 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (b) In cement mortar 1:4

Applying one coat of cement primer of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth.

Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts).

Construction of 2 nos. RCC post with tie beam for the entrance gate as per drawing and as directed.

RCC_DRAIN: Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 3 sand : 6 coarse aggregate by volume.

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). (b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works, retaining wall & boundary wall etc.)

RCC Work with Shuttering: Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). Using admixture, plasticiser (b) M20 grade concrete or Prop. 1:1.5:3

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (b) 20 mm thick (b) M 20 or Prop 1:1.5:3

PAVERS_BLOCK: Providing SUN ROCK HIGH CTS/DEVI paver block/tiles of concrete grade M30 or above of approved quality, size, shape of specified thickness over a levelling bedding layer of 30mm compacted sand over a base course of WBM or PCC (Base course to be paid separately) including cutting where necessary finished with spreading, sweeping, jointing sand and compacting the pavers using vibrating compactor as specified and directed. SUN ROCK HIGH CTS / Devi Tiles (Pavers). (B) 60 mm thick

Construction of Granular Sub-Base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with renovator at OMC, and compacting with vibratory roller to achieve the desired density complete as per technical specification (including cost of testing of materials at laboratory, cost of haulage, loading and unloading of materials to the work site). (a) Using Grading I material

FURNITURE : GENERAL MANAGER`S TABLE MODEL: HT 501-A Main Table Size: 2200W x 800W x 780H MM Side Unit Size: 1010W x 500D x 650H MM Table top: 50mm thick prelaminated particle board plus medium density board of melamine surface finish. Wire manager: Flip up included. Colour: Dark walnut. Make: Featherlite

NEO 50 WORKSTATION L SHAPE WORKSTATION SIZE:1500/1500W x 600/600D x 750HT Table Top and 1200HT …………………………………. PAD AND CPU TROLLEY. Make: Featherlite

LINEAR_WORKSTATION: Specifications: Table top - 25mm thick Pre-laminated particle board ………………………….. MOUSE PAD AND CPU TROLLEY. Make: Featherlite. (A) SIZE: 1200 x 600 x 750 ht WITH SCREENS

LINEAR_WORKSTATION: Specifications: Table top - 25mm thick Pre-laminated particle board ………………………….. MOUSE PAD AND CPU TROLLEY. Make: Featherlite. (B) SIZE: 2100 X 600 X 750 HT WITHOUT (SCREENS, PEDESTAL AND ABS KEY BOARD TRAY WITHOUT MOUSE PAD AND CPU TROLLEY )

CABIN_TABLE Specification:Table Top: 25mm thick pre laminate particle board……………………………………… ………………… TRAY WITHOUT MOUSE PAD AND CPU TROLLEY Make: Featherlite (A) MAIN TABLE SIZE: 1800 X 750 X 750, SIDE TABLE SIZE: 1050 X 450 X 750

CABIN_TABLE Specification:Table Top: 25mm thick pre laminate particle board……………………………………… ………………… TRAY WITHOUT MOUSE PAD AND CPU TROLLEY Make: Featherlite (B) MAIN TABLE SIZE: 1500 X 750 X 750 SIDE TABLE SIZE: 1050 X 450 X 750

DIAS_TABLE: Specification: 1 24584 24584 MAIN TABLE SIZE: 2100 x 900 x 750 ht no each Table Top: 25mm thick pre laminate particle .......................... ....................Management: 65mm dia wire management both side grommet hole. Make: Featherlite

CONFERENCE_TABLE: SIZE:5400 x 1500 x 750 ht Specifications:Table top - 25mm thick Pre-laminated particle board finished with 2mm PVC edge lipping. Under Structure - Gable end and modesty panel. Wire Management -Vertrebra for wire uptake to MS cable tray from floor and 3 nos 300 mm aluminium flip up for switch access. Make: Featherlite

MEETING_TABLE: SIZE:2400 x 1200 x 750 ht 1 41028 41028 Specifications: no each Table top - 25mm thick Pre-laminated particle board finished with 2mm PVC edge lipping. Under Structure - Gable end and modesty panel. Wire Management - Vertrebra for wire uptake to MS cable tray from floor and 2 nos 300 mm aluminium flip up for switch access Make: Featherlite

STORAGE: Storage is made of 18mm PLB with openable shutters, adjustable shelves, auto hinges, locking mechanism and recessed handles (a) FULL HEIGHT STORAGE- 3- 31392 94176 SIZE: 1050 X 450 X 2100 HT

STORAGE: Storage is made of 18mm PLB with openable shutters, adjustable shelves, auto hinges, locking mechanism and recessed handles (b) MEDIUM HEIGHT STORAGE- 8- 17938 143504 SIZE: 1050 X 450 X 1200 HT

STORAGE: Storage is made of 18mm PLB with openable shutters, adjustable shelves, auto hinges, locking mechanism and recessed handles (c) MEDIUM HEIGHT STORAGE- 10- 15375 153750 SIZE: 900 X 450 X 1200 HT

GENERAL MANAGER'S CHAIR MODEL:LIBERATE HB Base: The 640mm dia (26 inches) five pronged base ………………… ………………………………. upholstered with approved fabric Make: Featherlite

FUNCTIONAL MANAGER'S/PROJECT MANAGER`s CHAIR MODEL: OPUS MB A-FUR-CHR-M-01 Mid back revolving chair nos. each Mid back revolving chair …………………………. …………………….. Overall Ergonomic design for office use. Make: Featherlite

AM/ MI/ SI/ AIO'S CHAIR, MODEL: ASTRO MB Base: The 640mm dia (26 inches) five pronged base is made nos. …………………………………………….. ……………………………. Seat are duly upholstered with approved fabric Make: Featherlite

HEAD ASSISTANT, ACCOUNT'S OFFICER, CASHIER, DIAS AND LINEAR WORKSTATION CHAIR. MODEL: CONTACT PROJECT MB FXD ARMS Base: The 640mm dia (26 inches) ……………………………………… ………………………………. upholstered with approved fabric Make: Featherlite

L-SHAPE WORKSTATION AND MEETING CHAIR MODEL: SMART MB FXD ARMS Base: The 640mm dia (26 inches) five pronged ………………………………………… ………………………. Seat are duly upholstered with approved fabric Make: Featherlite

CONFERENCE CHAIR & GENERAL MANAGER'S VISITOR'S CHAIR MODEL: ASTRO VA Frame: The frame is made out of 25.4mm tube of …………………………………. …………………………….. Frames Fabric: Seat are duly upholstered with approved fabric Make: Featherlite

AM/ MI/ SI/ AIO & HEAD ASSISTANT`s VISITOR'S CHAIR MODEL: SMART VA Legs:Powdercaoted 4 Legs nos. each Back: Tinner Mesh Back Seating ……………………………… …………………….. Fixed Arms Fabric: Seat are duly upholstered with approved fabric Make: Featherlite

SEMINAR CHAIR, MODEL: MAGNA WD Frame: The frame is made out of 22mm tube of 16gauge tube nos. ……………………………………. ………………………. wood veneers & polished with melamine finish Make: Featherlite

SOFA, MODEL: INTERACT TWO SEATER Sizre: 1275 W X 710 D X 780 H nos. each MADE OFF : THE SOFA IS MADE OF FINE QUALITY FABRIC …………………………… ………………., STAPLER PINS (KANGARO COMPANY) LEGS : ARE MADE OF STAINLESS STEEL TUBES Make: Featherlite

SOFA , MODEL: INTERACT SINGLE SEATER, Sizre: 750 W X 710 D X 780 H nos each MADE OFF : THE SOFA IS MADE OF FINE QUALITY FABRIC …………………………. …………………….. (KANGARO COMPANY) LEGS : ARE MADE OF STAINLESS STEEL TUBES Make: Featherlite

CENTER TABLE, MODEL: 610-FL CENTER TABLE Rectangular Table no. each Glass top Chrome frame Size: 1200 x 600 mm Make: Featherlite

CORNER TABLE, MODEL: 610-FS SIDE TABLE Square table no. each Glass top Chrome frame Size: 600 x 600 mm Make: Featherlite

Sub-soil investigation work

Supplying with installation, testing and commissioning of Aquaguard Water Filter - Model - Geneus DX including GST, Income Tax, labour Cess and contractor`s profit as per direction.

Supplying with installation, testing and commissioning of Iron remover for Aquaguard Water Filter including GST, Income Tax, labour Cess and contractor`s profit as per direction.

FOUNDATIONSTONE_LAYING_CEREMONY: Providing Dais with steel structure frame and 38 mm thick timber plank and removing the same after completion of the programme including carriage etc. (approx. quantity = 240 sqft), providing Penndel of Bhaluka bamboo post & Jati bamboo frame with water proof roof, ceiling cloth decoration and removing the same after completion of the programme including carriage etc. (approx. quantity = 1000 sqft), providing plaque with necessary write ups over granite slab as required (approx. quantity = 6 sqft), providing flower decoration and balloon at Dais, Penndel & building as required, providing Seminar chair for Dais and removing the same after completion of the programme (approx. quantity 10 nos.), providing VIP Chair with cover and removing the same after completion of the programme (approx. quantity 15 nos.), providing plastic chair with cover and removing the same after completion of the programme 250 nos.), providing Lamp Stand with necessary items like Ribbon, Scissor, M. Oil, Salita, etc. for opening ceremony and removing the same after completion of the programme, Supplying of fresh Flower Buckeye (approx. quantity 10 nos.), supplying of best quality fulam Gamossa (approx. quantity 15 nos.), providing Sound System with operator including carriage to the programme site and returned back after completion of the programme, providing Welcome Gate with Banner (Flex) including decoration and removing the same after completion of the programme, providing Back Drop Banner (Flex) including printing and fixing complete, drinking water arrangement- (Water Bottle of 500 ml- approx. 250 nos.,, Water Bottle of 20 lit.- approx. 3 nos., Disposable Glass- approx. 250 nos.), providing Carpet for Dais and VIP Area including carriage to the programme site and returned back after completion of the programme- (approx. quantity = 500 sqft.), providing Podium for Dais including carriage to the programme site and returned back after completion of the programme, providing Refreshment item (Packet Lunch) for audience (each packet contains- Gulab Jamun-1, Veg Cutlet-1, Kasuri-1, Boil Cake-1 & tea)- approx. quantity 250 nos., providing Refreshment item for VIP (High Tea) (Boil Cake-1, Veg. Cutlet-1, Kaju Barfi-1, Fry kaju, Biscuits)- approx. quantity 25 nos., providing Flower Tub including carriage and returned back after completion of the programme, Big size- approx. quantity 10 nos., Small size- approx. quantity 20 nos., providing Dust Bin including carriage and returned back after completion of the programme approx. quantity 20 nos. all complete as required and as per direction of the deptt. to make the programme success.

INAUGURATION_CEREMONY: Providing Dais with steel structure frame and 38 mm thick timber plank and removing the same after completion of the programme including carriage etc. (approx. quantity = 240 sqft), providing Penndel of Bhaluka bamboo post & Jati bamboo frame with water proof roof, ceiling cloth decoration and removing the same after completion of the programme including carriage etc. (approx. quantity = 1000 sqft), providing plaque with necessary write ups over granite slab as required (approx. quantity = 6 sqft), providing flower decoration and balloon at Dais, Penndel & building as required, providing Seminar chair for Dais and removing the same after completion of the programme (approx. quantity 10 nos.), providing VIP Chair with cover and removing the same after completion of the programme (approx. quantity 15 nos.), providing plastic chair with cover and removing the same after completion of the programme 250 nos.), providing Lamp Stand with necessary items like Ribbon, Scissor, M. Oil, Salita, etc. for opening ceremony and removing the same after completion of the programme, Supplying of fresh Flower Buckeye (approx. quantity 10 nos.), supplying of best quality fulam Gamossa (approx. quantity 15 nos.), providing Sound System with operator including carriage to the programme site and returned back after completion of the programme, providing Welcome Gate with Banner (Flex) including decoration and removing the same after completion of the programme, providing Back Drop Banner (Flex) including printing and fixing complete, drinking water arrangement- (Water Bottle of 500 ml- approx. 250 nos.,, Water Bottle of 20 lit.- approx. 3 nos., Disposable Glass- approx. 250 nos.), providing Carpet for Dais and VIP Area including carriage to the programme site and returned back after completion of the programme- (approx. quantity = 500 sqft.), providing Podium for Dais including carriage to the programme site and returned back after completion of the programme, providing Refreshment item (Packet Lunch) for audience (each packet contains- Gulab Jamun-1, Veg Cutlet-1, Kasuri-1, Boil Cake-1 & tea)- approx. quantity 250 nos., providing Refreshment item for VIP (High Tea) (Boil Cake-1, Veg. Cutlet-1, Kaju Barfi-1, Fry kaju, Biscuits)- approx. quantity 25 nos., providing Flower Tub including carriage and returned back after completion of the programme, Big size- approx. quantity 10 nos., Small size- approx. quantity 20 nos., providing Dust Bin including carriage and returned back after completion of the programme approx. quantity 20 nos. all complete as required and as per direction of the deptt. to make the programme success.

Dochania and Company Private Limited

M/S Dhunu Construction