PROVN OF COVERED PARKING SHED CLOTHING STORE CULVERT AND AREA DRINAGE AT BIRCHGUNJ MIL STN PORT BLAIR

Amount

Surface dressing not exceeding 15 cm deep in Soft/loose soil all as specified and directed

Surface excavation not exceeding 30cm deep & averaging 15 cm deep and getting out in hard/dense soli all as specified and directed

Excavating in trenches in any type of soil , not exceeding 1.5 m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out all as specified and directed

Excavating in trenches in any type of soil ,exceeding 1.5 m wide and depth exceeding 1.5m and not exceeding 3.0 m for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm all as specified and directed

Removing excavated surplus soils material and depositing where directed at a distance not exceeding 250m and at a level not exceeding 1.5 m above the starting point all as direceted

Removal of excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50 m from the starting point all as specified and directed

Materilals and labour for PCC 1:4:8 Type D2 using 40mm graded stone aggregate in foundation and filling and mass concrete etc complete all as specified.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat for rough finished surface of concrete all as specified and directed

Use and waste of form work rough finished surfaces of square or rectangular pillars, posts, struts, piers, columns and stanchions all as specified and directed

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams flat for rough finished surface of concrete etc complete all as specified and directed

Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter all as specified and directed

Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide all as specified and directed

Materilals and labour for RCC M-30 (design mix) for foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete all as specified and directed

Materilals and labour for M-30 (design mix) for columns, pillars, piers, posts and struts all as specified and directed

Materilals and labour for RCC M-30 (design mix) for beams, cantilevers, bressummers, lintels over 1.5 m span all as specified and directed

Materilals and labour for Reinforced cement concrete M-30 (design mix)as in slabs / shelves and the like complete all as specified and directed

Materilals and labour for RCC M-25 grade concrete on Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses all as specified and directed

Materials and labour for Pre-cast RCC slabs for covers over drains using 1:2:4, type B1 set in cement mortar 1:4 all as specfified and as directed

Materilals and labour for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

Materials and labour for TMT steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and as in stirrups, spacers, and binders. all as specified and directed

Materilals and labour for pre-cast cement concrete block masonry with PCC 1:3:6 Type C1(20mm graded stone aggregate) solid blocks exceeding 10cm in width and setting in CM 1:6 all as specified and directed

Materials and labour for Pre-cast PCC block masonry Type B-1 (1:2:4) with solid block and set in CM1:4 all as specfified and as directed

Materilals and labour for moorum filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering all as specified and directed

Materilals and labour for Hardcore of broken stone or boulders guage n exc 63mm deposited and spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surfaces complete all as specified.

Materilals and labour for PCC 1:3:6 Type C2 using 40mm graded stone aggregate in cement concrecte in sub floor, sub bases floors and paving 100 mm thick complete all as specified.

Materilals and labour 75 mm thick PCC 1:3:6 type C1 (using 20mm graded agg) as in floor/path /plinth protection etc all as specified and directed

Materials and labour for 75mm thick Plain cement concrete (1:4:8) Type D2 ( using 40mm graded aggregates) as in sub base of flooring/ hard standing all as specified and directed

Materials and labour for 40mm thick PCC (1:2:4) Type B. ( using 20mm graded aggregates) as in flooring all as specified and directed

Materials and labour for glass dividing strips 3mm thick and 38mm wide as in floors all as specified and directed

Materilals and labour non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 10mm thick screed bed in CM 1:4 all as specified and directed

Materilals and labour for Glazed chequrred cement concrete tiles with grey cement and pigment of size 300x300x25 mm, set jointed and pointed in neat cement slurry over 15 mm thick screed in CM (1:6) all as specified and directed

Materilals and labour for Providing, precast cement concrete Type C-1 1:3:6 ( 20mm graded aggregates in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match all as specified and directed

Supply and fix MS steel work in tubular /post/trusses/purlin including special shaped washers base and bed plate cleat nut and bolt etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 all as specified and directed

Supply and fix mild steel works as in wind tie including all necessary drilling, bolting or riveting etc., confirming to Fe 290 all as specified and directed

Supply and fix Mild steel bolts exceeding 12mm not exceeding 20mm dia , purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30cm long all as specified and directed

Supply and fix Plates plain channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe- 410-W(Gde E-250) quality B all as specified and directed.

Supply and fix prepainted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/clading to wall fixed with self tapping screws all as specified and directed.

Supply and fix prepainted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in ridges, roof covering/clading to wall fixed with self tapping screws all as specified and directed.

Supply and fix 2nd class Hard wood 15mm thick plain both side as in eaves board etc. complete all as specified and directed

Supply and fix Anodised aluminium frame and shutters for doors, windows, ventilators of any type and design with one or more rebates including joining cleat for fixing, with aluminium grill, rubber gasket with and including necessary aluminium builders hardware required etc complete all as specified and as directed.

Supply and fix Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only aluminium anodised fly proof mesh 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium straps complete .

Materials and labour 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on one side with decorative choice lamination and other side white lamination fixed to Aluminium frame etc all as specified and directed by Engineer-in-Charge .

Supply and fix frame work for false ceiling using Anodised aluminium snap grid of size 605 x 605mm with and including 4mm dia GI hanger for adjusting level fixed to roof with necessary clamps,clamps hooks etc complete all as specified and directed

Materilals and labour for providing and fixing 4mm thick Non Asbestos designer E board of size 600 x600 mm as in ceiling fixed as per manufactures, complete all as specified and as directed.

Materilals and labour for Rendering 10mm thick in CM 1:6 on fair surfaces of brick work or concrete surfaces of walls, finished even and smooth ( without using extra cement) complete all as specified.

Materilals and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 all as specified and directed

Materials and labour for Rendering in cement mortar 1:4, 10mm thick mixed with water proofing compound over fair faces of brick wall, finished fair and even all as specified and directed

Materials and labour for rendering in two layers with cement plaster in CM 1:4, 05mm thick mixed with water proofing compound over 10mm thick cement mortar 1:6 all as specified and directed

Materilals and labour for two coats of oil bound distempering to new plastered wall surfaces over a coat of primer including preparation of surfaces all as specified and directed

Materilals and labour for applying two coats of cement base paint over a coat of primer on new plaster or untreated surfaces on walls incl preparation of wall surfaces all as specified and directed

M/L for 2 coats of synthetic enamel painting over a coat of red oxide zinc chrome primer incl preparation of new or previously untreated steel surfaces of any description over 10cm width or girth all as specified and directed

Materials and labour for point wiring complete with single core multi stranded Copper conductor FRLS cable of size 1.5 sqmm PVC insulated unsheathed 1100 volt grade in and including PVC conduit suitable size including Tee junction bends etc concealed in wall/fixed on ceiling and PVC switch board hylam sheet of 3mm thick including M.S. sunken boards of suitable size for housing switched sockets etc including 1.5 sqmm. green PVC insulated wire for earth continuty.complete for the following all as specified and as directed by Engineer-in-Charge

One light point controlled by one way switch

One fan point controlled by one switch and one regulator

One three pin 5 Amp switch socket cum on same board

One three pin 5 amp switch socket outlet multipurpose on independent board

Supply and fixing in replacement of switch piano flush type single pole one way 5 Amp all as specified and directed.

Supply and fix switch socket outlet 3 & 2 pin (mult pin) 5 amps flush/box type, complete all as specified and as dircted by Engineer-in-Charge

Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge

Supply and fix fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge Make:-Anchor/Havells/Bajaj

Supply and fix ceiling fan suitable for working on AC 230 volts, 50 Hz,1200 mm sweep 5 star rating with down rod and canopy colour of milky white including suitable fan hook anchor flashner for fixing of fan on ceiling complete all as specified and as directed.Make:Havells or equivalent Cormton/Usha

Supply and fixing energy efficient LED Smart bright batten 20 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. Make : Philips Cat No BN021C LED20S PSU CW GR S2 or eqvt in make of Bajaj/Wipro.

Supply and Fix exhaust fan suitable for on working on AC 230V, 50 Hz 380mm sweep RPM, with heavy duty motor, incl louvers complete all as specified Make: Havells/Crompton/Orient

Supply and fix New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power 25 w LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed. Make: PhilipsCat No BRPO20 LED HP/CW 240 V 25 w or equivalent model of Wipro / Havells

Supply and fix in repair metal enclosure distribution board SPN, 4 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed.Make- Havells or equvalent Legrand/L&T/Schneider

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.Make : Havells or equvalent Legrand/L&T/Schneider

Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed. Make : Havells or equvalent Legrand/L&T/Schneider

Materilals and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm size buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply and fix sheet metal enclosure for DBs when MCBs to be used for 2 way single pole and neutral.Make-Legrand/L&T/Schneider

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 C x 6 sq mm

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.

SK CONSTRUCTION

MUKUL SALES AND CO

MAJUMDAR FURNITURE

DEEPAK AGENCIES

Hindustan Traders

Vandana Enterprises