PROVN OF GEYSERS (P-17 AND P-49) RECESSED LED LIGHTS FOR FALSE CEILING (T-25) AND OUTDOOR INTERLOCKING TILES IN POCKET B AND PROVN HALF GLASS DOORS AT P-48 AND P-10

Amount

Excavation in post holes (or similar joles) not exc 0.5 Cum and getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exc 50 mtr and making good surfaces etc complete all as specified and as directed by Engr-in-Charge..

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m depth and getting out in Hard dense soil complete all as specified and directed.

M & L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete etc complete and as directed by Engr-in-Charge.

S & F rolled mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS : 1161-1979Gde St-240 complete all as specified and as directed by Engr-in-Charge.

S & F rolled mild steel plates (plane or chequered ) channels, square cut or notched (ordinary and countersunk) forming holes without any attachement. Fe 410 W (Gde E-250) quality -B

M&L for Rendering 10mm thick on fair faces of brick work or stone wall surfaces in CM 1:4 and finished even and smooth (without using extra cement) etc complete all as specified and as directed

Material and labour for preparation of new decorated external wall surfaces and applying two coat of cement paint complete all as specified and as directed.

S&F Pre-Painted galvalume aluminium zink coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding fixed to walls fixed with self tapping screws as specified.

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete.

Preparation of new steel surfaces n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F of Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to fe 290 grade E165

M & L for brickwork with subclass Flyash bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 as in man holes all as specified and directed.

S & F PVC (SWR) pipes single sockted in any length with rubber ring joints laid fixed to walls 110 mm bore

S&F of PVC (SWR) bends any radius 110 mm bore

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. each with shutters (without taking off shutters from the frame)complete all as specified.

Material and labour for Ist class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joints all as specified and as directed.

S&F of Ist Cl HW Plain, framed,panelled shutters 30mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or timber panels are raised and have bevelled or chamfered margins (for each side ),

S & F 100 mm size Brass Butt hinges medium weight

S & F 150 mm size Brass barrel tower bolts, with cast or sheet barrel and rolled orcast bolts and fixed

S&F 150 mm size brass handles Brass handles, cast type,polished bright.

Cutting holes in concrete block masonry built in cement mortar for inserting hold fasts and making good dismantling portion in CM (1:3) or PCC (1:2:4) as required exceeding half brick but not exceeding one brick.

S&F MS hold fasts, cleats and similar small articles, confirming to Fe-410-0 or Fe-310-0 of FI 25 x 3 mm thick and 250 mm long.

S&F of Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) length of bolt 250mm and fixing bolt with rolled or drawn brass bolts and fixed

S & F Floor door stopper 150mm long with cover plate of brass body and tongue with hard drawn steel spring

M&L for French polishing on surfaces of any description, width or girth including cleaning ,and preparing the surface including a coat of wood filler on new works with two or more coats all as directed

Preparation of new wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed

S&F Sheet glass,4.00 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane .

S&F brass Mortice lock vertical type100 mm size 4 levers including escutcheon plates and two keys

S&F Aluminium ( Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed in Repairs all as specified and directed

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L for Rendering in CM 1:4, 15mm thick on othe than fair faces of brick work or concrete surfaces all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacesall as specified and as directed directed by Engr-in-charge.

M&L for Precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in cover slab for lintelset in cement mortar 1:6 complete all as specified and directed. Note: Reinforcement will be measured and paid separately (use and waste of form work is deemed to be included).

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumn, hooking ends and binding with and including mild steel wire (annealed) 0.9mm dia or securing with clips complete all as specified and directed.

M & L for Machine Pressed Precast rubbermoulded concrete interlocking Paver Block any shape, size,colour or design, confirming to 15658-2006 of 60mm thickness, M-30 Grade including M -sand filling under paver block including watering,consolidation and leveling in layers n exc 25cm thick and all as specified and directed .

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick , with grey cement and pigment set jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed or beding layer in cement mortar 1:6 complete all as specified

M&L for Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

M&L for concealed/surface Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls/ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor, all as specified and as directed for the following :- One light point controlled by one, one way switch.

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals.

S&F Switch piano, flush type single pole, one way 05 Amps complete all as specified and as directed.

Supply & fix LED light fitting suitable for mounting with false ceiling cut out 570mm x 570 mm, 40 watt board panel 2 ft x 2 ft complete with connection by using connector and twin core flexible twisted copper wire from connector to light fitting complete. Make: LUKER Cat No. LPS40WW / WIPRO Cat No- D424065 or equivelent in Havells, Philips, C&S.

M&L for concealed Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc including making recess and making good the disturbed surfaces to match with existing surfaces all as specified and as directed by engr - in- charge. Note :- 2 runs of 4 sqmm, 1 run of 4 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.

S&F Single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB 20 Amps.

Supply and fix MCB DB, SPN, 8 ways, Isolated neutral bar, IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete.

Supply and fix MCB SPN 63 Amps, 240Volts, 10 KA, "B" Curve complete. Make: IndoasiaMake: Indoasian Cat No. 811056 or equivelent in Havells/Standard

Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve complete. Make: Indoasian Cat No. 811008 or equivelent in Havells/Standard

M & L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:3:6 type C-2 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009. (i) The unit rate includes earthing wire, and protection pipe upto 7.5 metre.

M&L for 4 mm dia galvanised iron or steel wire as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete.

Supply and fix Electrical Water heater (Geyser) vertical type storage capcity 25 Ltrs, single phase, 2 KW complete including fixing arrangement such as hold fastners, nut/bolts/washers etc complete and testing. Make: Havells,Cat No. GHWAMGTWH025 or V Guard Model Sprin Hot Plus or equivelent in Bajaj/ Usha/ Crompton

M&L for GI tubing medium grade 15 mm bore, ISI marked with and including all necessary fittings complete all as specified and as directed.

Supply and fixing bib taps, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed of size 15 mm dia bore.

M&L for stop/gate valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed of size 15 mm bore, complete all as specified and as directed.

Cutting existing pipe 20/15 mm dia and including inserting of new "GI Tee 20mm x 20mm x 15mm / 15mm x 15mm x 15mm for connecting of GI pipe size 15 mm bore complete all as specified and as directed.

Supply and fix PVC connection 15 mm size with PTMT nuts of length 600 mm suitable for cold and hot water complete all as specified and as directed.

Surface excavation not exc 30cm deep and averaging 15 cm deep and getting out in hard/dence soil.

M&L hardcore of gauge not exc 63 mm deposited spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface .

M&L 75 mm thick PCC (Plain cement concrete) type B-2 1;4;8 (40 mm graded aggregate ) as in sub base.

R K BUILDERS

TECKXPERT ENTERPRISES

Rajapriyaconstruction

UNIQUE INDIA CONSTRUCTIONS

p.chinnasamy