PROVN OF PROTECTION WALL NEAR BUSKET BALL AND ADDN / ALTERATION TO WALL WITH STAGGING AT PMS UNDER GE (P) PANAGARH

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in Soft/loose soil complete all as specified and directed.

M&L for PCC(1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling & mass concrete, complete all as specified and directed.

M&L for RCC M-25 as in Foundations, including rafts, footings, foundation beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement morter (1:6) complete all as specified and directed.

Removing of excavated soil, material n exc 50mtr and depositing where directed at a level n exc 1.5 m above the starting point complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cement motor on soft/loose soil complete all as directed.

M&L for RCC M-25 as in Walls, retaining walls, basement walls, ballast walls and the like any thickness above top of footings including attached pilasters and buttresses complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F TMT but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for Use & Waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for Use & Waste of Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc vertical or to batter and similar work complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 20 mm thick Screed Bed of cement morter (1:6) complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15 mm thick cement plaster of cement morter (1:6) complete all as specified and directed.

M&L for mixing of Fly ash, Clinker & stone dust in proportion of (1:3:6) ( i .e 10 % Fly ash, 30% Clinker and 60% Stone dust) laying , watering , ramming and compacting complete all as directed

M&L for hard core of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered andrammed to a true surface with stone aggregate all as specified.

M&L for 40mm thick, plain cement concrete type B-1, (1:2:4) (using 20mm graded stone agregate) in flooring or sub base in floor complete all as specified and directed.

M&L for plain cement concrete 100 mm thick (1:4:8) type D2(using 40 mm graded stone aggregate) at used as in sub base floor complete all as specified and as directed.

Demolition of Brickwork built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed .

Removing building materials etc. (other than soil )to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade with grey cement and pigment complete all as specified and directed.

Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed.

Writing Stops, commas, short lines, dashes, hyphens, brackets, etc complete all as specified and directed.

Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work complete all as specified and directed.

M&L for Engraving obliterating letter writing of any description, with front 5 cm , with paint over sone /Grinite slab with history of bde as per user requirements or size of board 2 feet 7 inch x3 feet 11 inch with side width or border 2.8 cm, 2cm &3 cm complete all as specified and directed. Note : rate shall includes granite slab along with all engravings written on it.

M&L for sand filling under floor with clean dry sand in foundations including watering and consolidationcomplete all as specified and as directed.

M&L for Plain Cement Concrete (1:3:6) type D2 using 40 mm graded stone aggregate as in foundation filling & mass concrete, complete all as specified and directed.

M&L for brick work using fly ash brick built in Cement motor (1:4) straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed.

M&L for Plain Cement Concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in coping complete all as specified and as directed.

M&L for Rendering 15mm thick in cement and sand mortar (1:4) on brick work or on concrete surfaces finished even and smooth with using extra cement complete all as specified and as directed.

M&L for Plain Cement Concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in surface channel or drain complete all as specified and as directed.

Extra for forming fair finished drain or channel including form, mould mitred/stopped ends complete all as specified and as directed.

M&L Sand Cushioning (dry) in Trenches for protection of UG Cables (below, above and around the UG Cable laid in Trenches), complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thick-ness of Sand Cushioning only shall be Measured and Paid for.

S&F fly ash brick, laid breadth-wise along the length of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core to connect external lighting complete all as specified and as directed.

Supply and fixing LED Flood light fittings of capacity 50 watts LED Fixture, with high pressure die cast aluminium housing with lens , IP 65 protected, , suitable mounting with flat iron bracket 32mm x 6mm clamp of required length including nuts & bolts fixed complete all as specified.

Supply and fixing Projector series light fittings of capacity 12 watts LED Fixture,die cast aluminiumhousing transparent tampered glass diffuser grey colour , IP 65 Rating, , suitable mounting with flat iron bracket 32mm x4mm clamp 40mm x 6mm of required length including nuts & bolts fixed complete all as specified.

Supply and fix Junction box with terminals of size 130 x 180x 77mm or nearest higher size made of polycarbonate body with IP 66/67 degree of protection, dust proof, water tight, shock proof, fire retardant, with internally embedded gasket fitted with heat treated bakelite terminals block and PVC glands for cable entry complete all as directed. Make: Hensel; Cat No-KF1000h or equivalent Sintex.

S&F Galvanised Iron Pipe 40 mm bore (dia),Medium grade as in protection of under gorund cable, complete all as specified and as directed.

M&L for earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary exacavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI wire 4 mm dia bolted and revetted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe with all fittings from top edge of earth plate including testing complete as specified and as shown in electrical plate no 3 of SSR part I.

S & F Mild Steel Flat iron Fe 290 Gde E-265 clamps for bracing of junction boxes etc.complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement morter (1:6) for laying of floor finishes complete all as specified and directed.

M&L Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with mixture of white & grey cement in equal proprtion & no pigments complete all as specified and directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

SUPARNA TRADING

M/S MODERN CONSTRUCTION