REPAIRS TO FLOORING JOINERY PLUMBING AND OTHER MISC BR WORK TO MD ACCN IN RESPECT OF OFFRS JCOS OR AND CIV MD ACCN AT OLD AIR FIELD UNDER GE 970 EWS

Amount

Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Glazed ceramic tiles coloured pattern as required 300 x 200 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the existing, over with after including 10mm thick backing coat in CM 1:3 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Glazed ceramic tiles coloured, pattern as required (dark & light shade combination) 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the existing, over with and including 10mm thick backing coat in CM 1:3 after dismantling floor hearth or wall and rubbish off the premises complete all as specified and directed

Vitrified ceramic tiles coloured pattern as required 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matche the existing, over with and including 15mm thick screed bed in CM 1:4 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescompete all as specified and directed

All as per item No.6 above but on vertical surfaces over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed

Rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement including taking down cement or lime plaster of any description from stone /brick/concrete wall etc incl raking out joints hacking for key scrubbing down with water and disposing of the rubbish complete all as specified and directed

Rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall (for three storey bldg) incl all necessary arrangement like scaffolding and masonry complete all as specified and directed.

Rendering 10 mm thick in CM 1:3 on concrete surfaces such as ceiling/landing etc finish even and smooth without using extra cement including taking down cement or lime plaster of any description complete all as specified and directed

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) using old size bricks complete all as specified and directed

All as per item No.12 above but except bricks complete all as specified and directed

Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed

Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of wall care putty with rubbing or smoothing of surface upto ture finish complete all as specified and directed

Preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of water base primer complete all as specified and directed

Preparation of new plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed .

Taking down chowkat or frame with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed

Taking down chowkat or frame with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed

Taking down shutter of any description n exc 1.00 Sqm each complete all as specified and directed

Taking down shutter of any description exc 1.00 Sqm and n exc 2.00 Sqm each complete all as specified and directed

Factory made solid PVC door Frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed

2nd class hardwood plain solid, straight chowkat and frame, wrought, framed rebated (one or more rebated) on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

35mm thick factory made plain framed panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12 mm to 15mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated complete all as specified and directed

35mm thick factory made 2nd class hardwood glazed and skeleton shutter, open rebated and prepare to receive gauge/glass (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20(a), fitted to chowkats complete all as specified and directed.

30 mm thick factory made 2nd class hard wood glazed and skeleton shutter open rebated prepared to receive glass, gauge etc. (sash bars as required) edges of framing plain, chamfered or rounded, cut or mitred beads for screwing glass etc. Sizes of members of shutters as specified in SSR Part - I, Section 8, Clause 8.20(b) complete all as specified and directed.

Preparation of new surfaces for painting to wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. grade of steel conforming to Fe-290 Gde-E-165 complete all as specified and directed.

PCC 1:2:4 type B0 12.5mm graded aggregatte as in hold fasts, bed blocks,coping and moulds etc including necessary form work complete all as specified and directed

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperature 1.40mm fixed with stainless steel wire staple to fixed with steel framed work or wooden framed work with & incl necessary items complete all as specified and directed

Sheet glass 4.00 mm thick ordinary quality and glazing with oil putty in square, rectangle n.exc 0.5 Sqm in each pan all as specified and as directed

Figured glass 4.00 mm thick, pin head type and glazing with oil putty in squares, rectangle exc 0.5 Sqm in each pane complete all as specified and as directed and directed

Stainless Steel butt hinges medium weight of size 100 mm fixed with stainless screws complete all as specified and directed.

125 mm butt hinges medium weight cold rolled mild steel and fixed with screws complete all as specified and directed.

300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.

200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.

Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .

hasp and staple safety type 100 mm size, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

Floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor of length 140mm complete all as specified and directed by Engr-in-Charge.

Mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed.

Door closer hydraulically regulated designation No. 1 universal type aluminium extruded section body suitable for door shutters up to 700 mm in width and weight not more than 35kg and fixed complete all as specified and directed

S&F in repair glass Corner shelf fancy type (3 tier) complete all as specified and directed

S&F in repair Harrison rail (Curtain rod//drapery rod), 20mm dia, powder coated with and including fancy type PVC bracket 2 Nos of each opening and side stopper powder coated of required shape and size 2 Nos of each opening complete all as specified and directed

S&F in repair sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on dwarf wall or existing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repair waste pipe for kitchen sink of size 32mm dia upto 900 length complete all as specified and directed

S&F in repair towel rail 600 mm long of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed

S&F in repair PTMT grating dome 100 mm dia (minimum weight 25 gms) complete all as specified and directed

S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete all as specified and directed

S&F in repair 15 mm dia PVC connections, 600 mm long with PTMT nuts of suitable size at two end complete all as specified and directed

S&F in repair 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed

S&F in repair rotational moulded polythene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete all as specified and directed

S&F in repair rotational moulded polythene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete all as specified and directed

Dismantling of corrugated or semi corrugated sheets as in roof coverings complete all as specified.

0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed

All as per item No. 59 above but except sheets complete all as specified and directed

1.00 mm thick plain galvanised, mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete complete all as specified and directed.

All as per item No. 62 above but except sheets complete all as specified and directed

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete complete all as specified and directed.

Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc. iron surfaces as in roofings exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc with and including dismantling roof sheet (PVC), any gauge, thickness complete all as specified and directed

15 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete with and including taking up or down 15 mm bore steel water tubing and connections complete all as specified and directed

20 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete with and including taking up or down 20 mm bore steel water tubing and connections complete all as specified and directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed

Lagging to pipes used in internal water supply (internal dia of pipe 15mm) or plumbing all round with, 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed

Lagging to pipes used in internal water supply (internal dia of pipe 20mm) or plumbing all round with, 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed

S&F in repair 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair 15 mm bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair 15 mm PVC bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair 15 mm PVC stop cock with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair brass Chromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed

S&F in repair CP angle valves (half turn type) conclead type (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed

S&F in repair Stop valves of size 20mm dia (half turn type) , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair 15 mm dia brass CP Wall Mixer Telephonic with Crutch (Provision for hand shower) and complete set of hand shower complete all as specified and directed

S&F in repair 15 mm dia brass CP Central Hole Basin Mixer without Pop-up waste system (Make : Prayag) complete all as specified and directed

S&F in repair 15 mm dia brass CP Sink Mixer with regular spout (W/M) complete all as specified and directed

S&F in repair Vitrous china wash hand basin, white, flat back of size 630 x 450 mm white excluding taps, waste, chain and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets including PTMT waste coupling as suitable complete all as specified and directed by the Engr-in-Charge.

S&F in repair bathroom mirror cabinet (box type) complete all as specified and directed

M&L for cleaning of PVC water tank of any capacity with and including necessary T&P as required complete all as specified and directed

S&F in repair Vitrous china wash hand basin with full pedestal of size 835 x 560x440mm white or cream colour excluding taps, waste, chain and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets complete all as specified and directed

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover , connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor complete all as specified and directed

S&F in repair vitreous China, squatting pan, Orissa Pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor including taking out old one complete all as specified and directed

S&F in repair water closet seat covers as required shape & size and quality complete all as specified and directed

S&F in repair CP health faucet complete set as required shape & size and quality complete all as specified and directed

M/S Sultan Enterprises

M/S maqsood enterprises

M/S GHULAM HASSAN KUCHAY

M/S RATHER CONSTRUCTION CO

M/S B S CONSTRUCTIONS

M/S MIR SAJAD ENTERPRISES

M/S ADIL CONSTRUCTIONS

M/S BHAT AND CO