Redevelopment of

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material upto a lead of 1 kilometer, as per direction of Engineer-in-charge.

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads & lifts

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:4:8 or richer mix (i/c equivalent design mix)

Dry stone Soling, 200 mm thick hand pack, including cost of stones and preparation of surface.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC,carriage of mixed material by tippers to work site, for all leads & lifts,spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Disposal of Lime, moorum and all kinds of rubbish upto 10 km Lead

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (20mm nominal size)

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate (20mm nominal size)

Providing and laying cement concrete in kerbs, steps and the like at or near ground level including curing, excluding the cost of centring, shuttering, and finishing.: 1:1½:3(1 cement :1½ coarse sand :3 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete with welding

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing corrugated G. S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved teel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.25 mm thick with zinc coating not less than 350 gram/m2

Providing ridges or hips of width 60 cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete (0.80 mm thick with zinc coating not less than 275 gram/m2)

Providing and fixing eaves boarding of second class kail wood of approved design including all wastages and carriages complete.300x40 mm (nominal size)

Providing and fixing of of 50x50 mm thick kail wood cornices including all carriage, complete.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 ( 1 cement : 6 coarse sand)

Providing and applying average 12 mm thick cement plaster in single coat in cement mortar 1:4 upto 10 m above ground including scaffolding etc. complete.

20 mm Cement plaster on Outer side of mix: 1 : 6 (1 cement : 6 coarse sand)

12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 4 ( 1 cement : 4 fine sand)

6 mm plaster in 1:3 (1 cement : 3 fine sand) on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc

Suspended floors, roofs, landings, balconies and access platforms

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and Plinth including curing in :1:6 (1 cement:6 Coarse Sand)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure including curing in :1:6 (1 cement:6 Coarse Sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length:Second class Deodar wood

Providing and fixing to existing door frames,30mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 60x30mm and wall thickness 2mm +/-0.2mm with inbuilt decorative moulding edging on one sides. TThe pannels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized MS rod and fastened with nuts and washers, complete as per manufacturers’ specification and direction of engineer-in-charge.

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.9 mm

Providing and fixing following Fitings with necessary screws etc. complete. Bright finished brass tower bolts 150 mm

125 mm Brass handles conforming

L-Drops (200 mm Long)

Providing & Fixing CP brass long body bib cock including, necessary flange, cutting and making good he walls / floors wherever required complete.

Providing and Fixing Following CP Fittings PTMT pillar cock

PTMT soap dish holder

PTMT-Towel Rail (450mm)

CI Grating

PVC waste pipe

Connector 0.60 m

Long Bend

Nipple 15 mm

20 mm dia ball valve

20 mm dia union

20-15 mm Reducer

Nipple 20 mm

15 mm dia union

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.Medium 15 mm dia. nominal bore

20 mm dia. nominal bore

Providing and Fixing Following PVC Fittings 75 mm dia Plain bend

75 mm dia door bend

75 mm dia Trap

75 mm dia Cowl

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Capacity 1000 Lts (4 Nos)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.brass pillar taps

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the wall sand floors wherever required:Range of three half stall urinals with 10 litre P.V.C.automatic flushing cistern

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Perforated pedal dustbin round with sling Dimensions :450mm dia 25 liter capacity with necessay fittings of Stainless steel, handle lid, opening assembly. Dustbins are used as waste basket for dry waste like papers and office waste & also used as for soiled clothes. Made From High Quality Stainless Steel, including fixing at site in cement concrete block

Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge.

Cement concrete pavement with 1:2:4 (1cement: 2 coarse sand: 4 graded crushed stone aggregate 20 mm nominal size) including finishing and curing complete.

Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

50 mm thick with 20mm nominal size stone aggregate,Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) including curing complete,

Providing and laying vitrified floor tile ssize 600 mm x 600 mm(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing 18 mm thick granite, mirror polished, machine cut forfloors, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite Stone

Providing and Fixing Aluminium Partition with Doors For Men 's Toilet,as per approved drawing and as per the direction of Engineer in charge.

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Inside Paint by Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Outside wall Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)

Rough dressing of the trenched ground including breaking clods.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish & surplus earth, if any with all leads & lifts (cost of sludge, manure or extra good earth, if needed, to be paid for separately) Holes 90 cm dia& 90 cm deep

Holes 60 cm dia& 60 cm deep

Providing and Displaying Acalypha Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy as per direction of the officer-in-charge.

Providing and Displaying Bird of paradise well developed with fresh & healthy 90 to 120 cm ht in 30 cm Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.

Providing and stacking of Pinus longifolia (Pinus) of height 90-105 cm. in cement pots of size 35 cm as per direction of the officer-in-charge

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.40 mm dia GI Pipe

Providing and fixing legs of Benches of approved size by welding etc. to Tublers of Benches and similar works, including applying priming coat of approved steel primer - 65 mm dia Medium duty GI Pipe

Providing and fixing carbon steel galvanized (minimum coating 5 micron)dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2) counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete masonry etc. as per direction of Engineer-in-charge.

Cycle Stands India Mild Steel Floor Mount Staggered Bicycle Parking Stand Combo for 4 Bikes and 2 Bikes for Secure Storage and Space Saving in Garage and Congested Areas (Black):38.5 x 12 x 10.5 Centimeters including installation etc complete.

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329: 100 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. 100 mm dia pipes

Providing and laying D.I. Specials of Class K-12 suitable for push-on jointing as per IS : 9523 Upto 600 mm dia.

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). 50 mm dia

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 19.9A.1 1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete: 250 mm dia. R.C.C. pipe

Providing and Fixing M.S.Manhole cover with Frame of required zize.for Septic Tank as per drawing and as approved by the Engineer in charge.

Construction of Sockpit 1500 mm dia approved drawing and design and as per the direction of engineer in charge complete in all respect including all connections of outlets from Septic Tank and RR Masonry work at top for supporting the RCC slab including manhole all inclusive.

Providing, lowering, laying in trenches, aligning, fixing in position and jointing socketed rubber gasket type ISI marked uPVC pipes of Class III (6 Kg/sqcm) suitable for potable water with rubber ring joints (as per IS 4985-2000) of 90 mm outer dia with all accessories (excluding specials) complete including all material,labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer.

Providing, lowering, laying in trenches, aligning, fixing in position and jointing socketed rubber gasket type ISI marked uPVC pipes of Class III (6 Kg/sqcm) suitable for potable water with rubber ring joints (as per IS 4985-2000) of following outer dia with all accessories (excluding specials) complete including all material,labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer 110 mm dia Pipe (for connecting the out let to Existing Septic Tank)

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size),Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge. 45 mm dia Regulatory Sign Board

Pre-casting & Placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. pipe 40mm dia and 450mm long with 150x150x6 mm M.S. plate welded at bottom and embeded 150 mm in cement concrete 1: 3: 6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing.

Geosynthetic Drainage with two filtering nonwoven geotextiles having a “W” configuration as longitudinal parallel channels. Minimum thickness to be 7.2mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75mm having pores of 150 micron and tensile strength of 8.0 kN/m and having plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure, tensile strength of 18 kN/m , with mass per unit area of 740 gsm.

Providing and Installing See saw of GI and FRP material 4 seater outdoor type as directed and approved by Engineer in Charge

Providing and Installing Slide with ladder of CI and virgin polystrene material overall height of 1.14m, length of stair pannel 1.270 and minimum plastic weight of 16 kg outdoor type for children as directed and approved by Engineer in Charge

Providing and Installing Swing seat of virgin polythelin and frame of CRC Pipe of material overall height of 1.14m, length of 25mm dia. provided with roap and length to provide 300 mm ground clearance of swing for childrens outodoor sports as directed and approved by Engineer in Charge

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc., including supplying and fixing ball and socket arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Double pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 A

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 4 sq. mm

Providing and Fixing 4M height Double arm Classic Ornamental Combo Pole with base made out of S.G.Iron grade 500/7, shaft made of MS Pipe in 3 Sections (Bottom dia : 90 mm, Middle dia 90, Top dia : 90 mm) and rings made of Cast Iron and base casting made out of S.G.Iron grade 500/7, painted with Polyurethane paint for UV stabilization. Cast Iron material used for casting of embellishments of Grade FG-150/220. MS pipes used shall be ISI – marked & of B-class as per the IS 1161. Bracket Arm is of suspended type with bracket shaft pipe of 60 mm dia 3.6mm thick and arm made of Cast Iron. Arm Width for the single arm is 900 mm. Embellishment on bracket arm is made of cast iron heritage type. Each cast piece is shot blasting to remove all its external dirt and residues etc. All CI & MS units are given an extensive treatment with PU based etch primer and paint prescribed for such surfaces to make it absolutely rust and corrosion proof, as well as giving it a pleasing appearance through antique finish. Minimum DFT level is 60 Microns. All the joints and carvings of the pole unit shall be free from any kind of distortion for a pleasing aesthetic look. The pole is structurally designed to sustain desired wind load at location. The Pole unit should be grouted using 3 nos. anchor J-bolts of size M-20 x 600 mm long with PCD 345mm confirming to EN 8 Grade. Total height of the pole along with Bracket is 6000mm. A suitable service window shall be provided in the base of pole to allow access to electrical connections and terminations Double arm bracket at 4 mtr hieght . Approved Make- BAJAJ 4M Monarch Bajaj/Valmount/Philips.all including the civil work like Foundation,Anchor Bolts etc of required size/dimensions as per design and upto the satisfaction of Engineer in Charge.

Design, Supply, Installation, Testing and Commissioning of LED Landscape Outdoor Post Top luminaire in suspended manner having an approximate size of 564mm outer diameter and 495mm height, Die cast Aluminium housing with PDC heat sink, Optical grade injection moulded polycarbonate diffuser and graphite grey UV resistant colour, Constant current electronic driver provided with high voltage, open & short circuit protection and ambient temperature -10°C to + 40°C, having an ingress protection of IP65 (LED Compartment) and impact protection of IK05. Luminaire is suitable for operation on single phase AC supply: 220-240V, power factor ≥ 0.95, THD ≤ 15%, Internal Surge Protection of 4kV with following specifications of light Engine for 45W: 3600 Lumens, Type II Street lighting Optics, 5700K + 500K CCT, 70 CRI and lumen maintenance of L70 at 50,000 hours. IP65 connectors, accessories etc. complete with all respects. Make – BAJAJ /PHILIPS/WIPRO “BORAGE Small” LED Post Top Luminaire (BCF BOR 45W LED WH CL PT)

Providing and Constructing Prefab Kiosk of external dimension 1500x1400 mm constructed with 75x75 mm size Mild Steel hollow section and covered with ACP.The maximum height remains 3.40 M from Ground Level with the floor at 250 mm above the GL.It will be furnished with ACP fascia and a Door,Window and inside Shelve as per the approved drawing and upto the satisfaction of engineer incharge inclussive of flooring , carriages , extra carriages handling,fabrication all civil,and E&M works complete job in all respect.

Hassan Road Construction Company Private Limited