PROPOSED CONSTRUCTION OF GROUP-D WORKERS QUARTERS (G plus 1) AT KRCRSSG KITTUR

PROPOSED GROUP D WORKER'S QUARTERS FOR KITTUR RANI CHANNAMMA RESIDENTIAL SAINIK SCHOOL FOR GIRLS AT KITTUR-591115

( GROUND + 1 FLOOR+HEADROOM )

ELECTRICAL WORKS

Sl No ITEM UNIT QTY TOTAL RATE AMOUNT

i ii iii iv v vi

1 Concealed Conduit System

Concealed Conduit System : Supplying……mm dia 2mm2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary

a) 19/20mm dia 2mm thick Vol 6/ Page 2/ 1.2.1

a) GROUND FLOOR Mtr

b) FIRST FLOOR Mtr

c) HEADROOM FLOOR Mtr

b) 25mm dia 2mm thick Vol 6/ Page 2/ 1.2.2

a) GROUND FLOOR Mtr

b) FIRST FLOOR Mtr

c) HEADROOM FLOOR Mtr

2 Groove cutting

Groove cutting in the wall supplying ….dia 2mm/2.5mm thick heavy gauge PVC Conduit Pipe with bends, metal junction boxes adhesive paste etc., and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.

a) 19/20mm dia 2mm thick Vol 6/ Page 2/ 1.3.1

a) GROUND FLOOR Mtr

b) FIRST FLOOR Mtr

c) HEADROOM FLOOR Mtr

b) 25mm dia 2mm thick Vol 6/ Page 2/ 1.3.2

a) GROUND FLOOR Mtr

b) FIRST FLOOR Mtr

c) HEADROOM FLOOR Mtr

Supplying and fixing surface/ flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessary rawl plugs, Machine /NF screws etc., complete.

1-2 Way- Item No.3.3.1

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

4-5 Way- Item No.3.3.3

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

6 Way- Item No.3.3.4

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

8 Way- Item No.3.3.5

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

10-12 Way- Item No.3.3.6

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.

a) Short point up to 3Mtr from tapping point to out let via switch Vol 6/ Page 5/ 2.1.1

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch Vol 6/ Page 5/ 2.1.2

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch Vol 6/ Page 5/ 2.1.3

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

5 Supplying 6A flush/projected type socket and a 6 amps flush/projected type SP switch either surface/ flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required

b) 6Amps 3/5 Way Vol 6/ Page 8/ 3.1.2

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

6 Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required Vol 6/ Page 8/ 3.2

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

7 Supply and fixing of bakelite D.P/Socket/ switch with/ with out neon indicator /ElectronicStepped Fan Regulator.over existing wood board or flush mounting in plastic plates/nitches.

b) 16Amps Flush type SP switch Vol 6/ Page 10/ 3.14.10

a) GROUND FLOOR Nos

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

c) 16Amps Flush type Universals socket Vol 6/ Page 10/ 3.14.12

a) GROUND FLOOR Nos

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

d) 16Combined switch and socket with indication Vol 6/ Page 10/ 3.14.15

a) GROUND FLOOR Nos

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

8 Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring .

b) 1.5 sqmm Vol 6/ Page 5/2.3.2

a) GROUND FLOOR Mtr

b) FIRST FLOOR Mtr

c) HEADROOM FLOOR Mtr

c) 2.5 sqmm Vol 6/ Page 5/2.3.3

a) GROUND FLOOR Mtr

b) FIRST FLOOR Mtr

c) HEADROOM FLOOR Mtr

d) 4 sqmm Vol 6/ Page 5/2.3.4

a) GROUND FLOOR Mtr

b) FIRST FLOOR Mtr

c) HEADROOM FLOOR Mtr

e) 6 sqmm Vol 6/ Page 5/2.3.5

a) GROUND FLOOR Mtr

b) FIRST FLOOR Mtr

c) HEADROOM FLOOR Mtr

g) 16 sqmm Vol 6/ Page 5/2.3.7

a) GROUND FLOOR Mtr

b) FIRST FLOOR Mtr

c) HEADROOM FLOOR Mtr

9 Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and the either end of the pipe terminated completely.

a) 20mm .Vol 6/ Page 2/1.2.1

a) GROUND FLOOR Mtr

b) FIRST FLOOR Mtr

c) HEADROOM FLOOR Mtr

b) 25mm Vol 6/ Page 2/1.2.2

a) GROUND FLOOR Mtr

b) FIRST FLOOR Mtr

c) HEADROOM FLOOR Mtr

10 Extra for supplying 4mm thick white plastic plate and covering for junction boxes or size ……mm conduit using necessary machine screws

a) 80mm Vol 6/ Page 9/3.10.2

a) GROUND FLOOR Nos

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

b)110mm Vol 6/ Page 9/3.10.3

a) GROUND FLOOR Nos

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

11 Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate..

a) 6A one way switch .Vol 6/ Page 9/3.6.1

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

b) 6A two way switch .Vol 6/ Page 9/3.6.2

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

c) 6A three way socket .Vol 6/ Page 9/3.6.3

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

d) stepped fan regulator .Vol 6/ Page 9/3.6.4

a) GROUND FLOOR Each

b) FIRST FLOOR Each

e)16A one way switch .Vol 6/ Page 9/3.6.7

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

f) 6Abell push .Vol 6/ Page 9/3.6.8

a) GROUND FLOOR Each

b) FIRST FLOOR Each

g) TV/telephone socket.Vol 6/ Page 9/3.6.11

a) GROUND FLOOR Each

b) FIRST FLOOR Each

12 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable for operate on 230V 50Hz, AC Supply Vol 6/ Page 30/6.1

a) GROUND FLOOR Each

b) FIRST FLOOR Each

13 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, and 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system and as per technical data approved

I) 48" Sweep (1200mm) Vol 6/ Page 30/6.3.1

a) GROUND FLOOR Each

b) FIRST FLOOR Each

14 Supplying of.....feet PVC Batten with integrated LED tube....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI>80. Power Input:220-240V@ 50/60Hz & Power factor>0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.

1x2' tube light fitting Vol 6/ Page 43/11.3.1

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

15 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type Curve capacity of 10K complete wiring as required

6-32 ASP Vol 6/ Page 17/5.18.1

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

16 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.-12 Way SP & N (vol 6/18/5.19.4)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

17 Supplying and fixing modular MCB devices (Tripper) with breaking capacity of 6kA

40A SP Vol 6/ Page 17/5.18.2

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

18 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase seperators, handle and wiring complete. Protection of overload and short circuit in Thermal Magnetic Release. micro processor release shall have earth fault as per IS-13947. ( Icu=100%) In 4P MCCB all poles should have protection for Short Circuit /Over Load. For microprocessor MCCBS facility for segrigating priority and Non-priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). multipole breakers shall be designed to break all the poles simultaneously and they shall have single mechanism.

FOUR POLE - 100A 25kA Vol 6/ Page 17/5.15.9

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

19 Supplying …….. A rated phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm MS flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc. complete.

100A 4x30x6mmAluminium Strips Vol 6/ Page 20/5.40.1

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

20 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.Vol 6/ Page 14/5.7.4

a) GROUND FLOOR Each

21 Supply, install, test and commissioning of Analogue addressable Manual Call Point (Resettable Type) with inbuilt isolator and LED indicator, designed for IP44 requirements Vol 6/ Page 85/15.73

a) GROUND FLOOR Each

22 Modular plate

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box

1-2 Way- Item No.3.5.1 Each

4-5 Way- Item No.3.5.3 Each

6 Way- Item No.3.5.4 Each

8 Way- Item No.3.5.5 Each

10-12 Way- Item No.3.5.6 Each

23 Supplying And Fixing Metal Fan Box with Round Hook. Electrical SR 2023-24 Sl No.1.13 Vol-6 page-4

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

24 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board Electrical SR 2023-24 Sl No.3.14.7 Vol-8 page-10 6A Angle Holder

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

25 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board Electrical SR 2023-24 Sl No.3.14.5 Vol-8 page-10 6A Bakelite Ceiling Rose

a) GROUND FLOOR Each

b) FIRST FLOOR Each

c) HEADROOM FLOOR Each

26 1.1 KV Class HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010

PVC Wire - 70 SqmmAl Wt: 18.7 Kg, Total Wt: 28.5 Kg/100 Mtr Coil Vol 6/ Page 22/49.05

a) GROUND FLOOR coil

27 Pipe Grounding

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg Vol 6/ Page 22/51.01

a) GROUND FLOOR no,

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each Vol 6/ Page 22/51.02

a) GROUND FLOOR no,

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag Vol 6/ Page 22/51.03

a) GROUND FLOOR no,

Fabricating supplying and mounting MS box madeout.... SWG suitable for floor/ wall mounting, fully weatherproof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 tanks treatment with powder coated paintand finally finished with approved colour etc., complete. (vol 6/20/5.42.1) 14 SWG

a) GROUND FLOOR cm2

LT Single Phase 5-30 Amps, DLMS Complaint Static Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations) (ESCOM SR 2023-24 vol 6/23/53.03)

a) GROUND FLOOR no.

b) FIRST FLOOR no.

32 HDPE PIPE WORK

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two "O" rings and a coupler of suitable size, including loading and unloading at both destination and cutting of pipes where ever necessary including jointing with all labour, all lead and lift including encasing the pipe around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done the contractor shall have to make his own arrangement for procuring water for testing etc. complete.

SN8 Double Wall Corrugated HDPE pipe sizes of 200 mm dia (BWSSB SR 2023-24 vol 5/106/9.16.5)

a) GROUND FLOOR m

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6.(vol 6/36/8.3)

a) GROUND FLOOR m

b) FIRST FLOOR m

c) HEADROOM FLOOR m

(GF+FF+SF) TOTAL RS.

ADD FOR ROUND OFF

(GF+FF+SF) GRAND TOTAL RS.

PROPOSED GROUP D WORKER'S QUARTERS FOR KITTUR RANI CHANNAMMA RESIDENTIAL SAINIK SCHOOL FOR GIRLS AT KITTUR-591115

( GROUND + 1 FLOOR+HEADROOM )

ELECTRICAL WORKS

MEASURMENT SHEET

Sl No ITEM UNIT NOS LENGTH BREADTH DEPTH QTY

i ii iii iv v vi vii viii

1 Concealed Conduit System

Concealed Conduit System : Supplying……mm dia 2mm2.5mm thick heavy gauge PVC conduit pipe with suitable size bends

a) 19/20mm dia 2mm thick

a) GROUND FLOOR Mtr 1 440

b) FIRST FLOOR Mtr 1 440

c) HEADROOM FLOOR Mtr 1 150

b) 25mm dia 2mm thick

a) GROUND FLOOR Mtr 1 135

b) FIRST FLOOR Mtr 1 135

c) HEADROOM FLOOR Mtr 1 40

2 Groove cutting

Groove cutting in the wall supplying ….dia 2mm/2.5mm thick heavy gauge PVC Conduit Pipe with bends, metal junction

a) 19/20mm dia 2mm thick

a) GROUND FLOOR Mtr 1 440

b) FIRST FLOOR Mtr 1 440

c) HEADROOM FLOOR Mtr 1 150

b) 25mm dia 2mm thick

a) GROUND FLOOR Mtr 1 135

b) FIRST FLOOR Mtr 1 135

c) HEADROOM FLOOR Mtr 1 40

Supplying and fixing surface/ flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessary rawl plugs, Machine /NF screws etc., complete.

1-2 Way- Item No.3.3.1

a) GROUND FLOOR Each 14

b) FIRST FLOOR Each 14

c) HEADROOM FLOOR Each 4

4-5 Way- Item No.3.3.3

a) GROUND FLOOR Each 14

b) FIRST FLOOR Each 14

c) HEADROOM FLOOR Each 4

6 Way- Item No.3.3.4

a) GROUND FLOOR Each 33

b) FIRST FLOOR Each 33

c) HEADROOM FLOOR Each 6

8 Way- Item No.3.3.5

a) GROUND FLOOR Each 9

b) FIRST FLOOR Each 9

c) HEADROOM FLOOR Each 6

10-12 Way- Item No.3.3.6

a) GROUND FLOOR Each 19

b) FIRST FLOOR Each 19

c) HEADROOM FLOOR Each 8

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.

a) Short point up to 3Mtr from tapping point to out let via switch

a) GROUND FLOOR Point 33

b) FIRST FLOOR Point 33

c) HEADROOM FLOOR Point 8

b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch

a) GROUND FLOOR Point 38

b) FIRST FLOOR Point 38

c) HEADROOM FLOOR Point 8

c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch

a) GROUND FLOOR Point 33

b) FIRST FLOOR Point 33

c) HEADROOM FLOOR Point 8

5 Supplying 6A flush/projected type socket and a 6 amps flush/projected type SP switch either surface/ flush mounting in a existing gang box

b) 6Amps 3/5 Way

a) GROUND FLOOR Each 38

b) FIRST FLOOR Each 38

c) HEADROOM FLOOR Each 8

6 Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box

a) GROUND FLOOR Each 14

b) FIRST FLOOR Each 14

c) HEADROOM FLOOR Each 4

7 Supply and fixing of bakelite D.P/Socket/ switch with/ with out neon indicator /ElectronicStepped Fan Regulator.over existing wood board or flush mounting in plastic plates/nitches.

b) 16Amps Flush type SP switch

a) GROUND FLOOR Nos 14

b) FIRST FLOOR Nos 14

c) HEADROOM FLOOR Nos 4

c) 16Amps Flush type Universals socket

a) GROUND FLOOR Nos 14

b) FIRST FLOOR Nos 14

c) HEADROOM FLOOR Nos 4

d) 16Combined switch and socket with indication

a) GROUND FLOOR Nos 3

b) FIRST FLOOR Nos 3

c) HEADROOM FLOOR Nos 3

8 Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring .

a) GROUND FLOOR Mtr 1 270

b) FIRST FLOOR Mtr 1 270

c) HEADROOM FLOOR Mtr 1 100

a) GROUND FLOOR Mtr 1 440

b) FIRST FLOOR Mtr 1 440

c) HEADROOM FLOOR Mtr 1 150

a) GROUND FLOOR Mtr 1 304

b) FIRST FLOOR Mtr 1 304

c) HEADROOM FLOOR Mtr 1 75

a) GROUND FLOOR Mtr 1 203

b) FIRST FLOOR Mtr 1 203

c) HEADROOM FLOOR Mtr 1 85

a) GROUND FLOOR Mtr 1 14

b) FIRST FLOOR Mtr 1 14

c) HEADROOM FLOOR Mtr 1 8

9 Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles .

a) GROUND FLOOR Mtr 1 68

b) FIRST FLOOR Mtr 1 68

c) HEADROOM FLOOR Mtr 1 35

a) GROUND FLOOR Mtr 1 68

b) FIRST FLOOR Mtr 1 68

c) HEADROOM FLOOR Mtr 1 35

10 Extra for supplying 4mm thick white plastic plate and covering for junction boxes or size ……mm conduit using necessary machine screws

a) GROUND FLOOR Nos 68

b) FIRST FLOOR Nos 68

c) HEADROOM FLOOR Nos 5

a) GROUND FLOOR Nos 27

b) FIRST FLOOR Nos 27

c) HEADROOM FLOOR Nos 5

11 Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.

a) 6A one way switch .

a) GROUND FLOOR Each 81

b) FIRST FLOOR Each 81

c) HEADROOM FLOOR Each 2

b) 6A two way switch .

a) GROUND FLOOR Each 54

b) FIRST FLOOR Each 54

c) HEADROOM FLOOR Each 2

c) 6A three way socket .

a) GROUND FLOOR Each 22

b) FIRST FLOOR Each 22

c) HEADROOM FLOOR Each 2

d) stepped fan regulator .

a) GROUND FLOOR Each 12

b) FIRST FLOOR Each 12

e)16A one way switch .

a) GROUND FLOOR Each 14

b) FIRST FLOOR Each 14

c) HEADROOM FLOOR Each 2

f)6Abell push .

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

g) TV/telephone socket.

a) GROUND FLOOR Each 12

b) FIRST FLOOR Each 12

12 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable for operate on 230V 50Hz, AC Supply

a) GROUND FLOOR Each 8

b) FIRST FLOOR Each 8

13 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, and 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system and as per technical data approved

I) 48" Sweep (1200mm)

a) GROUND FLOOR Each 12

b) FIRST FLOOR Each 12

14 Supplying of.....feet PVC Batten with integrated LED tube....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI>80. Power Input:220-240V@ 50/60Hz & Power factor>0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.

1x2' tube light fitting (vol 6/page no.43/11.3.1)

a) GROUND FLOOR Each 27

b) FIRST FLOOR Each 27

c) HEADROOM FLOOR Each 4

15 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type Curve capacity of 10K complete wiring as required

a) GROUND FLOOR Each 6

b) FIRST FLOOR Each 6

c) HEADROOM FLOOR Each 2

16 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.-12 Way SP & N (vol 6/18/5.19.4)

a) GROUND FLOOR Each 10

b) FIRST FLOOR Each 10

c) HEADROOM FLOOR Each 2

17 Supplying and fixing modular MCB devices (Tripper) with breaking capacity of 6kA Vol 6/ Page 17/5.18.2

a) GROUND FLOOR Each 17

b) FIRST FLOOR Each 11

c) HEADROOM FLOOR Each 2

18 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase seperators, handle and wiring complete. Protection of overload and short circuit in Thermal Magnetic Release. micro processor release shall have earth fault as per IS-13947 Vol 6/ Page 17/5.15.9

FOUR POLE - 100A 25kA

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

c) HEADROOM FLOOR Each 1

19 Supplying …….. A rated phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm MS flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc. complete.

100A 4x30x6mmAluminium Strips

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

c) HEADROOM FLOOR Each 2

20 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

21 Supply, install, test and commissioning of Analogue addressable Manual Call Point (Resettable Type) with inbuilt isolator and LED indicator, designed for IP44 requirements

22 Modular plate

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box

1-2 Way- Item No.3.5.1

a) GROUND FLOOR Each 14

b) FIRST FLOOR Each 14

c) HEADROOM FLOOR Each 4

4-5 Way- Item No.3.5.3

a) GROUND FLOOR Each 14

b) FIRST FLOOR Each 14

c) HEADROOM FLOOR Each 4

6 Way- Item No.3.5.4

a) GROUND FLOOR Each 33

b) FIRST FLOOR Each 33

c) HEADROOM FLOOR Each 6

8 Way- Item No.3.5.5

a) GROUND FLOOR Each 9

b) FIRST FLOOR Each 9

c) HEADROOM FLOOR Each 6

10-12 Way- Item No.3.5.6

a) GROUND FLOOR Each 19

b) FIRST FLOOR Each 19

c) HEADROOM FLOOR Each 8

23 Supplying And Fixing Metal Fan Box with Round Hook. Electrical SR 2023-24 Sl No.1.13 Vol-6 page-4

a) GROUND FLOOR Each 8

b) FIRST FLOOR Each 8

c) HEADROOM FLOOR Each 0

24 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board Electrical SR 2023-24 Sl No.3.14.7 Vol-8 page-10 6A Angle Holder

a) GROUND FLOOR Each 41

b) FIRST FLOOR Each 41

c) HEADROOM FLOOR Each 4

25 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board Electrical SR 2023-24 Sl No.3.14.5 Vol-8 page-10 6A Bakelite Ceiling Rose

a) GROUND FLOOR Each 17

b) FIRST FLOOR Each 17

c) HEADROOM FLOOR Each 6

26 1.1 KV Class HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010

PVC Wire - 70 SqmmAl Wt: 18.7 Kg, Total Wt: 28.5 Kg/100 Mtr Coil Vol 6/ Page 22/49.05

a) GROUND FLOOR coil 1

27 Pipe Grounding

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg Vol 6/ Page 22/51.01

a) GROUND FLOOR no. 6

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each Vol 6/ Page 22/51.02

a) GROUND FLOOR no. 6

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag Vol 6/ Page 22/51.03

a) GROUND FLOOR no. 6

Fabricating supplying and mounting MS box madeout.... SWG suitable for floor/ wall mounting, fully weatherproof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 tanks treatment with powder coated paintand finally finished with approved colour etc., complete. (vol 6/20/5.42.1) 14 SWG

a) GROUND FLOOR

front and side cm2 2 2 60 60

horizontal cm2 2 2 100 15

Vertical cm2 2 2 100 15

LT Single Phase 5-30 Amps, DLMS Complaint Static Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations) (ESCOM SR 2023-24 vol 6/23/53.03)

a) GROUND FLOOR no. 10

b) FIRST FLOOR no. 10

32 HDPE PIPE WORK

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe

SN8 Double Wall Corrugated HDPE pipe sizes of 200 mm dia (BWSSB SR 2023-24 vol 5/106/9.16.5)

a) GROUND FLOOR m 50

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. (vol 6/36/8.3)

a) GROUND FLOOR no. 16

b) FIRST FLOOR no. 16

c) HEADROOM FLOOR no. 3

PROPOSED GROUP D WORKER'S QUARTERS FOR KITTUR RANI CHANNAMMA RESIDENTIAL SAINIK SCHOOL FOR GIRLS AT KITTUR-591115

( GROUND + 1 FLOOR+HEADROOM )

Items for Steel & Cement revised rates

as per order no. SEBC:TA:SR:2022-23

ELECTRICAL WORKS

SL.No Item Unit Vol, PageNo. & Item No. Basic Rate Total rate Area GF Final Rate Add Lead & Lift 1% Total rate Area FF Final Rate Add Lead & Lift 2% Total rate Area HF Final Rate

Weightage Weightage Weightage

(vii+xiii) (xi+xii) (xv+xvi)

i ii iii iv v vii xiii ix x xi xii xiii xiv xv xvi xvii

1 Concealed Conduit System

Concealed Conduit System : Supplying……mm dia 2mm2.5mm thick heavy gauge PVC conduit pipe with suitable size bends a) 19/20mm dia 2mm thick Each Vol 6/ Page 2/ 1.2.1 66 0 0 0 0 0

b) 25mm dia 2mm thick Each Vol 6/ Page 2/ 1.2.2 78 0 0 0 0 0

2 Groove cutting

Groove cutting in the wall supplying ….dia 2mm/2.5mm thick heavy gauge PVC Conduit Pipe with bends, metal junction a) 19/20mm dia 2mm thick Each Vol 6/ Page 2/ 1.3.1 68 0 0 0 0 0

b) 25mm dia 2mm thick Each Vol 6/ Page 2/ 1.3.2 79 0 0 0 0 0

Supplying and fixing surface/ flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessary rawl plugs, Machine /NF screws etc., complete. (GM/Anchor)

1-2 Way- Item No.3.3.1

4-5 Way- Item No.3.3.3

6 Way- Item No.3.3.4

8 Way- Item No.3.3.5

10-12 Way- Item No.3.3.6

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire with .

a) Short point up to 3Mtr from tapping point to out let via switch

b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch

c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch

5 Supplying 6A flush/projected type socket and a 6 amps flush/projected type SP switch either surface/ flush mounting in a existing gang box

b) 6Amps 3/5 Way

6 Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box

7 Supply and fixing of bakelite D.P/Socket/ switch with/ with out neon indicator /ElectronicStepped Fan Regulator.over existing wood board or flush mounting in plastic plates/nitches.

b) 16Amps Flush type SP switch

c) 16Amps Flush type Universals socket

d) 16Combined switch and socket with indication

8 Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring .

b) 1.5 sqmm Mtr Vol 6/ Page 5/2.3.2 26 0 0 0 0 0

c) 2.5 sqmm Mtr Vol 6/ Page 5/2.3.3 42 0 0 0 0 0

d) 4 sqmm Mtr Vol 6/ Page 5/2.3.4 63 0 0 0 0 0

e) 6 sqmm Mtr Vol 6/ Page 5/2.3.5 92 0 0 0 0 0

g) 16 sqmm Mtr Vol 6/ Page 5/2.3.7 318 0 0 0 0 0

9 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab.

10 Extra for supplying 4mm thick white plastic plate and covering for junction boxes or size ……mm conduit using necessary machine screws

11 Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate..

a) 6A one way switch . Each Vol 6/ Page 9/3.6.1 102 0 0 0 0 0

b) 6A two way switch . Each Vol 6/ Page 9/3.6.2 166 0 0 0 0 0

c) 6A three way socket . Each Vol 6/ Page 9/3.6.3 171 0 0 0 0 0

d) stepped fan regulator . Each Vol 6/ Page 9/3.6.4 357 0 0 0 0 0

e)16A one way switch . Each Vol 6/ Page 9/3.6.7 180 0 0 0 0 0

f) 6Abell push . Each Vol 6/ Page 9/3.6.8 177 0 0 0 0 0

g) TV/telephone socket. Each Vol 6/ Page 9/3.6.11 156 0 0 0 0 0

12 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable for operate on 230V 50Hz, AC Supply

13 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, and 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system and as per technical data approved

I) 48" Sweep (1200mm) Each Vol 6/ Page 30/6.3.1 2984 0 0 0 0 0

14 Supplying of.....feet PVC Batten with integrated LED tube....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI>80. Power Input:220-240V@ 50/60Hz & Power factor>0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.

1x2' tube light fitting Each Vol 6/ Page 43/11.3.1 551 0 0 0 0 0

15 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type Curve capacity of 10K complete wiring as required

16 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.-12 Way SP & N (vol 6/18/5.19.4) Each Vol 6/ Page 18/5.19.4 1863 0 0 0 0 0

17 Supplying and fixing modular MCB devices (Tripper) with breaking capacity of 6kA

18 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase seperators, handle and wiring complete. Protection of overload and short circuit in Thermal Magnetic Release. micro processor release shall have earth fault as per IS-13947

FOUR POLE - 100A 25kA Each Vol 6/ Page 17/5.15.9 8487 0 0 0 0 0

19 Supplying …….. A rated phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm MS flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc. complete.

100A 4x30x6mm Aluminium Strips Each Vol 6/ Page 20/5.40.1 2465 0 0 0 0 0

20 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. Each Vol 6/ Page 14/5.7.4 691 0

21 Supply, install, test and commissioning of Analogue addressable Manual Call Point (Resettable Type) with inbuilt isolator and LED indicator, designed for IP44 requirements Each Vol 6/ Page 85/15.73 3000 0

22 Modular plate

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box (GM/Anchor)

1-2 Way- Item No.3.5.1 Each Vol 6/ Page 8/3.5.1 137 0 0 0 0 0

4-5 Way- Item No.3.5.3 Each Vol 6/ Page 8/3.5.3 175 0 0 0 0 0

6 Way- Item No.3.5.4 Each Vol 6/ Page 8/3.5.4 234 0 0 0 0 0

8 Way- Item No.3.5.5 Each Vol 6/ Page 8/3.5.5 284 0 0 0 0 0

10-12 Way- Item No.3.5.6 Each Vol 6/ Page 8/3.5.6 344 0 0 0 0 0

23 Supplying And Fixing Metal Fan Box with Round Hook. Each Vol 6/ Page 4/1.13 2808 117 0 0 0 0 0

24 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board Electrical 6A Angle Holder Each Vol 6/ Page 10/3.14.7 74 0 0 0 0 0

25 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board Electrical 6A Bakelite Ceiling Rose Each Vol 6/ Page 10/3.14.5 78 0 0 0 0 0

26 1.1 KV Class HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010

PVC Wire - 70 SqmmAl Wt: 18.7 Kg, Total Wt: 28.5 Kg/100 Mtr Coil coil Vol 6/ Page 22/49.05 9066 0

27 Pipe Grounding

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg no. Vol 6/ Page 22/51.01 743 0

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each no. Vol 6/ Page 22/51.02 676 0

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag no. Vol 6/ Page 22/51.03 310 0

Fabricating supplying and mounting MS box madeout.... SWG suitable for floor/ wall mounting, fully weatherproof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 tanks treatment with powder coated paintand finally finished with approved colour etc., complete. 14 SWG cm2 (vol 6/20/5.42.1) 0.5 0

LT Single Phase 5-30 Amps, DLMS Complaint Static Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations) (ESCOM no. vol 6/23/53.03) 958 0 0 0 0 0

32 HDPE PIPE WORK

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe

SN8 Double Wall Corrugated HDPE pipe sizes of 200 mm dia m (BWSSB SR 2023-24 vol 5/106/9.16.5) 762 0

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. m vol 6/36/8.3) 44 0 0 0 0 0

PROPOSED GROUP D WORKER'S QUARTERS FOR KITTUR RANI CHANNAMMA RESIDENTIAL SAINIK SCHOOL FOR GIRLS AT KITTUR-591115

( GROUND + 1 FLOOR+HEADROOM )

COMMON SR 2023-2024 ,Items for Steel & revised rates as per order no. SEBC:TA:SR:2026-2027 dtd 04-04-2026 are considered

Sl No ITEM UNIT QTY TOTAL RATE AMOUNT

i ii iii iv v vi

EARTHWORK EXCAVATION

1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.

a) In all kinds of soils Depth upto 1.5 m Cum

(vol 1 / page no.5 / sl no.1.4.1)

b) Depth exceeding 1.5m, but not exceeding 3 m Cum

(vol 1 / page no.5 / sl no.1.4.2)

FILLING WITH AVAILABLE EXCAVATED EARTH

2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceed- ing 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (vol 1 / page no.7/ sl. no.1.9)

GROUND FLOOR Cum

total excavated earth and plinth areas and extra areas

ANTI-TERMITE TREATMENT

3 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.ll the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) (vol 2 / page no.5/ sl. no.4.1)

GROUND FLOOR sqm

PLAIN CEMENT CONCRETE WORK

4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:2:4 (M5) Using 40 mm nominal size graded crushed coarse aggregates (vol 1 / page no.15 /2.1.5)

a) GROUND FLOOR Cum

5 Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (vol 1 /15/ 2.1.4)

FOR COLUMN BED & WINDOW CILLS

a) GROUND FLOOR Cum

b) FIRST FLOOR Cum

c) HEADROOM FLOOR Cum

REINFORCED CEMENT CONCRETE WORKS

FOR SUB STRUCTURE ( FOUNDATION)(M25)

6 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (vol 1 / page no.15 / 2.2.3)

GROUND FLOOR(for footing and retaining wall)(M25) Cum

FOR SUPER STRUCTURE (M25)

7 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates (vol 1 / page no.16 / 2.5.2)

a plinth beams Cum

c staircase, Cum

e Slab Beams Cum

f Roof Slab Cum

c staircase, Cum

e Slab Beams Cum

f Roof Slab Cum

e Slab Beams Cum

f Roof Slab Cum

8 0.23mt THICK BRICKWORK

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (vol 2 / Page no 14/ 6.8 )

a) GROUND FLOOR Cum

b) FIRST FLOOR Cum

c) HEADROOM FLOOR Cum

9 BRICKWORK ( PARTITION WALLS )

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(vol 2 / Page no.14 / 6.14)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

10 INTERNAL PLASTER

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( vol 2 /Page no. 41/ 8.1.1 )

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

11 EXTERNAL PLASTER

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( vol 2 / Page no. 42/8.9 )

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

Providing and applying white cement based putty of average thick- ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(vol 2 /page no.50 /8.51)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

13 DELUXE MULTISURFACE PAINT FOR INTERIOR

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (vol 2 / page no. 46 / 8.33.1)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

14 ACRYLIC EMULSION FOR EXTERIOR

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(vol 2 / page no. 46 / 8.32)

same as external plaster

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

15 PAINTING TO WOODWORK

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (vol 2 / page no.46 / 8.33.2)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

16 PAINTING TO STEEL WORK

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifica- tions and as per directions of Engineer-in-charge. (vol 2 / page no.47 / 8.33.3)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

17 VITRIFIED FLOORING FOR TOILETS

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x1200 mm (vol 2 / page no.61 / 9.17.5)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

18 VITRIFIED FLOORING FOR ROOMS

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x1200 mm (vol 2 /page no.61 / 9.17.5)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

19 COLOUR GLAZED TILES DADOING

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.(600mmx1200mm) (vol 2 / page no.65 / 9.39)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (vol 2 / page no.110 / 12.89)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

21 STEEL BARS (Fe-500d)

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.(vol 1 / page no.18 / 2.11a) (revised sr rates 1st quarterly 2026-2027)

a) GROUND FLOOR t

b) FIRST FLOOR t

c) HEADROOM FLOOR t

22 STEEL WORK (GRILL WORK)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. (vol 2 / page no.86 / 11.34B)

a) GROUND FLOOR Kg

b) FIRST FLOOR Kg

c) HEADROOM FLOOR Kg

23 TEAK WOOD FRAME

Providing Teak wood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled includin making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (SR 2021-2022-vol 2 / page no.99/ 12.10)

a) GROUND FLOOR Cum

b) FIRST FLOOR Cum

24 WPC DOOR SHUTTER

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 35MM THICKNESS (vol 2 / page no.112/ 12.94.2)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

25 WPC DOOR FRAME

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) 62X150MM.(vol 2 / page no.111/ 12.93.3)

a) GROUND FLOOR m

b) FIRST FLOOR m

26 WPC DOOR SHUTTER

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30MM THICKNESS (vol 2 / page no.112/ 12.94.1)

-do- with both side prelam

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

27 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (vol 2 / page no.105 / 12.58)

a) GROUND FLOOR Nos

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

28 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. (vol 2 / page no.105 / 12.61)

a) GROUND FLOOR Nos

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

29 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (vol 2 / page no.105 / 12.62)

a) GROUND FLOOR Nos

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

DOOR TOWER BOLTS

30 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (vol 2 /page no. 105 / 12.63)

a) GROUND FLOOR Nos

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

DOOR BUTT HINGES

31 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm (vol 2 / page no.107 / 12.74.1)

a) GROUND FLOOR Nos

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

32 WATERPROOFING

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (vol 2 /page no. 149 / 15.1)

Ground Floor Sqm

First Floor Sqm

Terrace floor slab area Sqm

33 CUDDAPAH SLAB

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications.(vol 2 /page no. 64 / 9.36)

a) GROUND FLOOR sqm

b) FIRST FLOOR sqm

34 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with ....bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.SR 2023-24 Vol-2 page63 Sl. No 9.25

Ground Floor m2

(GF+FF+HF) TOTAL RS.

ADD FOR ROUND OFF

(GF+FF+HF) GRAND TOTAL RS.

1 INDIAN WC PAN

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fix- tures complete, including cutting and making good the walls and floors wherever required: (vol 2 / page no. 131 / 14.1.1)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

2 EUROPEAN TYPE WC

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid (vol 2 / page no.131 / 14.3.1)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (vol 2 / page no. 132 / 14.7.1)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

4 STAINLESS STEEL KITCHEN SINK

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

510x1040 mm bowl depth 250 mm with drain board (vol 2 / page no.133 / 14.10.1.1)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

5 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. (vol 2 / page no.135 / 14.22)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

6 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm (vol 2 / page no.136 / 14.28.1.1)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

8 Providing and fixing 100 mm sand cast Iron grating for gully trap. (vol 2 /page no. 136 / 14.29)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

7 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete (vol 2 / page no.136 / 14.31)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

8 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete(vol 2 / page no.127 /13.59)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

9 Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a.economy (vol 2 / page no.144 /14.86a)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

10 Providing and fixing Wall Mixer Telephonic with L Shaped tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a.economy (vol 2 / page no.143 /14.77a)

a) GROUND FLOOR Each 8

b) FIRST FLOOR Each 8

12 Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a.economy (vol 2 / page no.143 /14.81a)

a) GROUND FLOOR Each 8

b) FIRST FLOOR Each 8

13 Providing and fixing Single lever sink cock (Lifting type cold water cartridge) with swivel spout and wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a.economy (vol 2 / page no.142 /14.73a)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

14 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

25 mm nominal bore (vol 2 / page no.117/ 13.5.3)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

15 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.vol 2 / page no.123/ 13.34)(SYNTEX TANK)

c) HEADROOM FLOOR L

16 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.(vol 2 / page no.134 / 14.16A)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

17 Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a. economy ( Vol 2/ Page 140/14.56 a) FOR WC

a) GROUND FLOOR Each

b) FIRST FLOOR Each

18 Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a. economy (Vol 2/ Page 139/14.55a) FOR UTILITY

a) GROUND FLOOR Each

b) FIRST FLOOR Each

19 Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a. economy (Vol 2/ Page 139/14.54a)

a) GROUND FLOOR Each

b) FIRST FLOOR Each

20 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter (Vol 2/ Page 125/13.48)

WC outlet pipes 100mm dia

a) TOTAL Mtr 35

21 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 80 mm nominal dia pipes (Vol 2/ Page 125/13.50.8)

wash basin NP grating outlet pipes 80mm

22 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter (Vol 2/ Page 125/13.48)

Rain water downtake pipe 100mm dia

23 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia pipes (Vol 2/ Page 125/13.50.4)

inlet pipes APVC 1.25" dia 32mm

24 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia pipes (Vol 2/ Page 125/13.50.2)

inlet pipes APVC 20mm dia

25 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia pipes (Vol 2/ Page 125/13.50.5)

OHT inlet 40mm dia APVC

26 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore (vol 2 / page no. 117 / 13.4.1)

a Terrace FLOOR no.

27 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 (vol 2 / page no.126 / 13.53) Each

(GF+FF+HF) TOTAL RS.

ADD FOR ROUND OFF

(GF+FF+HF) GRAND TOTAL RS.

PROPOSED GROUP D WORKER'S QUARTERS FOR KITTUR RANI CHANNAMMA RESIDENTIAL SAINIK SCHOOL FOR GIRLS AT KITTUR-591115

( GROUND + 1 FLOOR+HEADROOM )

COMMON SR 2023-2024 ,Items for Steel & revised rates as per order no. SEBC:TA:SR:2026-2027 dtd 04-04-2026 are considered

MEASUREMENT SHEET

Sl No ITEM UNIT NOS LENGTH BREADTH DEPTH QTY

i ii iii iv v vi vii viii

EARTHWORK EXCAVATION

1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.

septic tank Cum 1 3.28 3.28 1.83

plinth beams Cum 1 408 0.23 0.45

a) In all kinds of soils Depth upto 1.5 m (vol 1 / page no.5 / sl no.1.4.1) Cum

b) Depth exceeding 1.5m, but not exceeding 3 m (vol 1 / page no.5 / sl no.1.4.2)

2 FILLING WITH AVAILABLE EXCAVATED EARTH

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceed- ing 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (vol 1 / page no.7/ sl. no.1.9)

total excavated earth cum as the site is sloping

Plinth area raised cum 50% plinth area considered 18"

Plinth area raised cum 1.83 50% plinth area considered 6'0"

Plinth area raised cum 176.331 1.83 retaining wall inside to plinth area

3 ANTI-TERMITE TREATMENT

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.ll the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) (vol 2 / page no.5/ sl. no.4.1)

septic tank sqm

plinth area sqm 1 1 387.45 plinth area 390.28 387.45

PLAIN CEMENT CONCRETE WORK

4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:2:4 Using 40 mm nominal size graded crushed coarse aggregates (vol 1 / page no.15 /2.1.5)

a) GROUND FLOOR

5 Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (vol 1 /page no.15/ 2.1.4)

FOR COLUMN BED & WINDOW CILLS

a) GROUND FLOOR

septic tank Cum 0.15

Mix 1:3:6 (M10) Cum

Mix 1:3:6 (M10) Cum

c) HEADROOM FLOOR

Mix 1:3:6 (M10) Cum

REINFORCED CEMENT CONCRETE WORKS

FOR SUB STRUCTURE ( FOUNDATION)(M25)

6 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.(vol 1 / page no.15 / 2.2.3)

GROUND FLOOR (for footing and retaining wall)(M25)

retaining wall Cum 1 52 0.23

columns Cum 0.23 0.38 3.68

FOR SUPER STRUCTURE(M25)

7 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately(vol 1 / page no.16 / 2.5.2)

plinth beam & column qty Cum

landing Cum 1 2.49 1.22 0.15

waist slab Cum 2 1.14 2.8 0.15

steps Cum 19 1.5 0.3 0.15

extras for through lintel Cum 1 50.03 0.23 0.15

f ROOF SLAB AND CANOPIES

septic tank Cum 0.15

g RCC CHEJJA for external plaster

GF chejja total qty Cum

landing Cum 0.15

waist slab Cum 0.15

L10 Cum 0.23 0.15 MD

extras for through lintel Cum 1 0.23 0.15

f ROOF SLAB AND CANOPIES

FF chejja total qty Cum

extras for through lintel Cum 1 22.03 0.23 0.15

f ROOF SLAB AND CANOPIES

Slab Cum 1 30.31

HF chejja total qty Cum

8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure (vol 2 / page no.14 / 6.8)

a) GROUND FLOOR

walls horizotal Cum 3 27 0.23 2.77

walls vertical Cum 5 12 0.23 2.77

septic tank Cum 2 0.23

MD Cum 1.06 0.23 2.1 MD

walls horizotal Cum

walls vertical Cum

c) HEADROOM FLOOR

staircase wall horizontal Cum 2 5.24 0.23 2.77

staircase wall vertical Cum 2 2.95 0.23 2.77

parapet wall Cum 1 156.53 0.23 0.91

PARTITION WALLS

9 Providing Half brick masonry (vol 2 / page no.14 / 6.14)

a) GROUND FLOOR Sqm 8 1.55 1.22

toilet ledge walls total qty Sqm

b) FIRST FLOOR Sqm

toilet ledge walls total qty Sqm

10 INTERNAL PLASTER

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (vol 2 / page no.41 /8.1.1)

a) GROUND FLOOR

ceiling Sqm 1 387.45

c) HEADROOM FLOOR

staircase wall Sqm

staircase wall Sqm

11 EXTERNAL PLASTER

Providing 18 mm cement plaster in two coats(vol 2 / Page no 42 / 8.9 )

a) GROUND FLOOR

balcony+corridor walls Sqm 1 31.92 0.48

balcony+corridor walls Sqm

c) HEADROOM FLOOR

staircase wall Sqm

staircase wall Sqm

Providing and applying white cement based putty of average thick- ness 1 mm, (vol 2 /page no.50 /8.51)

(same as internal plaster)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

13 DELUXE MULTISURFACE PAINT FOR INTERIOR

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on wall(vol 2 / page no. 46 / 8.33.1)

(same as internal plaster)

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

14 ACRYLIC EMULSION FOR EXTERIOR

Finishing walls with 100% Premium acrylic emulsion paint (vol 2 / page no. 46 / 8.32)

same as external plaster

a) GROUND FLOOR Sqm

b) FIRST FLOOR Sqm

c) HEADROOM FLOOR Sqm

15 PAINTING TO WOODWORK

Painting wood work with Deluxe Multi Surface Paint of required shade. (vol 2 /page no. 46 / 8.33.2)

a) GROUND FLOOR

qty x 2.5 times Sqm 2.5

qty x 2.5 times Sqm 2.5

16 PAINTING TO STEEL WORK (GRILL)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. (vol 2 /page no.47 /8.33.3)

a) GROUND FLOOR

balcony and passage handrail Sqm 1 1

staircase handrail Sqm 1 9.96 1

qty x 2.5 times Sqm 2.5

balcony handrail Sqm

staircase handrail Sqm

qty x 2.5 times Sqm 2.5

c) HEADROOM FLOOR

qty x 2.5 times Sqm 2.5

17 VITRIFIED FLOORING FOR TOILETS

Providing and laying Vitrified tile floor tiles of Size of Tile 600x1200 mm (vol 2 /page no.61 /9.17.5)

a) GROUND FLOOR

toilet size 01 Sqm 4 1.52 2.44

toilet size 02 Sqm 4 2.56 1.67

toilet size 01 Sqm

toilet size 02 Sqm

18 VITRIFIED FLOORING FOR ROOMS

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), . Size of Tile 600x1200 mm (vol 2 /page no.61 / 9.17.5)

a) GROUND FLOOR

all rooms Sqm 1 1 298.3

c) HEADROOM FLOOR

all rooms Sqm 11.05

19 COLOUR GLAZED TILES DADOING

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 (600mmx1200mm) (vol 2/ page no.65 / 9.39)

a) GROUND FLOOR

C.toilet Sqm 4 2 2.74

A.toilet Sqm 4 2 2.74

deduct doors D3 Sqm

Net GF Dadoing Sqm

deduct doors D3 Sqm

Net FF Dadoing Sqm

UPVC WINDOWS Providing & fixing of 2.5-track x 2-panel sliding windows (vol 2/ page no.110 / 12.89)

a) GROUND FLOOR

c) HEADROOM FLOOR

21 STEEL BARS (Fe-500d)

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement (vol 1 / page no.18 /2.11a)(revised sr rates 1st quarterly 2026-2027)

a) GROUND FLOOR kg/cum kgs to tonne

FOUNDATION AND LIFT RETAINING WALL t 120 1000

PLINTH BEAM, COLUMN,SLAB BEAM t 110 1000

SLAB+SEPTIC TANK t 95 1000

STAIRCASE, CHEJJA, LINTEL t 90 1000

b) FIRST FLOOR kg/cum kgs to tonne

COLUMN,SLAB BEAM t 110 1000

STAIRCASE, LINTEL, CHEJJA, t 90 1000

c) HEADROOM FLOOR kg/cum kgs to tonne

COLUMN,SLAB BEAM t 110 1000

LINTEL, CHEJJA, t 90 1000

22 STEEL WORK (GRILL WORK)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.(vol 2 /page no.86 / 11.34B)

a) GROUND FLOOR

balcony railing Sqm

staircase railing Sqm

panel board safety grill Sqm 1 1.83 3.04

weight 21kg/sqmt Kg 21

balcony railing Sqm

staircase railing Sqm

weight 21kg/sqmt Kg 21

c) HEADROOM FLOOR

weight 21kg/sqmt Kg 21

23 TEAK WOOD FRAME

Providing Teak wood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled includin making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (SR 2021-2022-vol 2 / page no.99/ 12.10)

a) GROUND FLOOR frame width frame depth frame length

b) FIRST FLOOR frame width frame depth frame length

24 WPC DOOR SHUTTER

Providing and fixing 35 mm thick wpc door shutter.(vol 2 /page no.112 / 12.94.2)

a) GROUND FLOOR

25 WPC DOOR FRAME

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other FramesDoor frame of size 62x150mm (vol 2 / page no.111/ 12.93.3)

a) GROUND FLOOR frame length

26 WPC DOOR SHUTTER

Providing and fixing 30 mm thick wpc door shutter.(vol 2 /page no.112 / 12.94.1)

a) GROUND FLOOR

c) HEADROOM FLOOR

27 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (vol 2 / page no.105 / 12.58)

a) GROUND FLOOR

all doors Nos 28

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

28 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. (vol 2 / page no.105 / 12.61)

a) GROUND FLOOR

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

29 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (vol 2 /page no. 105 / 12.62)

a) GROUND FLOOR

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

DOOR TOWER BOLTS

30 Providing and fixing aluminium tower bolts, ISI marked, anodised (vol 2 / 105 / 12.63)

a) GROUND FLOOR

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

DOOR BUTT HINGES

31 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (vol 2 / page no.107 / 12.74.1)

a) GROUND FLOOR

b) FIRST FLOOR Nos

c) HEADROOM FLOOR Nos

32 WATERPROOFING

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion(vol 2 / page no. 149 / 15.1)

chajja Sqm 1 0.3

toilet Sqm 1 0.75

second floor slab Sqm 1 1

septic tank Sqm 1

headroom slab Sqm 1 1

33 CUDDAPAH SLAB

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications.(vol 2 /page no. 64 / 9.36)

a) GROUND FLOOR

kitchen katta Sqm 4 5.4 0.61

store shelf Sqm 20 3.04 0.61

kitchen katta Sqm 4 5.4 0.61

store shelf Sqm 20 3.04 0.61

34 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with ....bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.SR 2023-24 Vol-2 page63 Sl. No 9.25 800

Footpath Pavers m2 1 30 6

PLUMBING & SANITARY WORKS

1 INDIAN WC PAN

Providing and fixing water closet squatting pan (Indian type W.C. pan ) : (vol 2 / page no.131 / 14.1.1)

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

2 EUROPEAN TYPE WC

W.C. pan with ISI marked white solid plastic seat and lid (vol 2 / page no. 131 / 14.3.1)

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (vol 2 / page no. 132 / 14.7.1)

a) GROUND FLOOR Each 8

b) FIRST FLOOR Each 8

4 STAINLESS STEEL KITCHEN SINK

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel 510x1040 mm bowl depth 250 mm with drain board (vol 2 / page no.133 / 14.10.1.1)

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

5 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. (vol 2 / page no.135 / 14.22)

a) GROUND FLOOR Each 8

b) FIRST FLOOR Each 8

6 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm (vol 2 / page no.136 / 14.28.1.1)

a) GROUND FLOOR Each 12

b) FIRST FLOOR Each 12

7 Providing and fixing 100 mm sand cast Iron grating for gully trap. (vol 2 / page no.136 / 14.29)

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

8 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete (vol 2 / page no. 136 / 14.31)

a) GROUND FLOOR Each 8

b) FIRST FLOOR Each 8

9 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete(vol 2 / page no.127 /13.59)

a) GROUND FLOOR Each 9

b) FIRST FLOOR Each 9

10 Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a.economy (vol 2 / page no.144 /14.86a)

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

11 Providing and fixing Wall Mixer Telephonic with L Shaped tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a.economy (vol 2 / page no.143 /14.77a)

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

12 Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a.economy (vol 2 / page no.143 /14.81a)

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

13 Providing and fixing Single lever sink cock (Lifting type cold water cartridge) with swivel spout and wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a.economy (vol 2 / page no.142 /14.73a)

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

14 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore (vol 2 / page no.117 / 13.5.3)

a) GROUND FLOOR Each 8

b) FIRST FLOOR Each 8

15 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.vol 2 / page no.123/ 13.34) (SYNTEX TANK)

a HEADROOM FLOOR L 8000

16 Providing and fixing 8 mm dia C.P. / S.S. Jet .(vol 2 / page no.134 / 14.16A)

a) GROUND FLOOR Each 8

b) FIRST FLOOR Each 8

17 Providing and fixing Bib cock Two way Class a.economy (Vol 2/ Page 140/14.56 a) FOR WC

a) GROUND FLOOR Each 8

b) FIRST FLOOR Each 8

18 Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a. economy (Vol 2/ Page 139/14.55a) FOR UTILITY

a) GROUND FLOOR Each 8

b) FIRST FLOOR Each 8

19 Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a. economy (Vol 2/ Page 139/14.54a)

a) GROUND FLOOR Each 4

b) FIRST FLOOR Each 4

20 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter (Vol 2/ Page 125/13.48)

WC outlet pipes 100mm dia

21 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 80 mm nominal dia pipes (Vol 2/ Page 125/13.50.8)

wash basin NP grating outlet pipes 80mm dia

22 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter (Vol 2/ Page 125/13.48)

Rain water downtake pipe 100mm dia

23 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia pipes (Vol 2/ Page 125/13.50.4)

inlet pipes APVC 1.25" dia 32mm

24 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia (Vol 2/ Page 125/13.50.2)

inlet pipes APVC 20mm dia

25 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia pipes (Vol 2/ Page 125/13.50.5)

OHT inlet 40mm dia APVC

a) TOTAL Mtr 1 82

26 Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end):25 mm nominal bore (vol 2 / 117 / 13.4.1)

a HEADROOM FLOOR Nos 4

27 Constructing brick masonry chamber for underground C.I. inspection chamber Inside dimensions 455x610 mm and 45 cm deep (vol 2 / page no.126 / 13.53)

PROPOSED GROUP D WORKER'S QUARTERS FOR KITTUR RANI CHANNAMMA RESIDENTIAL SAINIK SCHOOL FOR GIRLS AT KITTUR-591115

( GROUND + 1 FLOOR+HEADROOM )

COMMON SR 2023-2024 ,Items for Steel & revised rates as per order no. SEBC:TA:SR:2026-2027 dtd 04-04-2026 are considered

SL.No Item Unit Vol, PageNo. & Item No. Basic Rate Add Percentage on finished rate for formwork Total rate Area GF Final Rate Add Lead & Lift 1% Total rate Area FF Final Rate Add Lead & Lift 2% Total rate Area TF Final Rate

Weightage Weightage Weightage

(vii+xiii) (xi+xii) (xv+xvi)

i ii iii iv v vi vii xiii ix x xi xii xiii xiv xv xvi xvii

EARTHWORK EXCAVATION

1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of buildings

a) In all kinds of soils Depth upto 1.5 m Cum vol 1 / page no.5 / 1.4.1 242 0

b) Depth exceeding 1.5m, but not exceeding 3 m Cum vol 1 / page no.5 / 1.4.2 259 0

FILLING WITH AVAILABLE EXCAVATED EARTH

2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers Cum vol 1 / page no.7 / 1.9 266 0

ANTI-TERMITE TREATMENT

3 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment sqm vol 2 / page no.5 / 4.1 118 0

PLAIN CEMENT CONCRETE WORK

Providing and laying in position plain cement concrete for levelling course for all works in foundation.

4 Mix 1:2:4 (M5) Using 40 mm nominal size graded crushed coarse aggregates Cum vol 1 / page no.15 /2.1.5 6079 0

5 Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum vol 1 /page no.15 / 2.1.4 6147 0 0 0

REINFORCED CEMENT CONCRETE

FOR SUB STRUCTURE (FOUNDATION)(M25)

6 Providing and laying in position Cement Concrete for all Foundation works. formwork 3%

M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum vol 1 / page no.15 / 2.2.3 6227 0

FOR SUPER STRUCTURE (M25)

7 Providing and laying in position Reinforced cement concrete for all Super structures of building , M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates formwork 50%

a PLINTH BEAMS Cum vol 1 / page no.16 / 2.5.2 6734 0 0 0

b COLUMNS formwork 70%

c STAIRCASE Cum vol 1 / page no.16 / 2.5.2 6734 0 0 0

d LINTELS Cum vol 1 / page no.16 / 2.5.2 6734 0 0 0

e SLAB BEAMS Cum vol 1 / page no.16 / 2.5.2 6734 0 0 0

f ROOF SLAB Cum vol 1 / page no.16 / 2.5.2 6734 0 0 0

g CHEJJA Cum vol 1 / page no.16 / 2.5.2 6734 0 0 0

8 0.23mt THICK BRICKWORK FOR PLINTH

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level Cum vol 2 / page no 14 / 6.8 7948 0 0 0

9 BRICKWORK ( PARTITION WALLS )

Providing Half brick masonry with common burnt clay Non Modular bricks in CM 1:4 Sqm vol 2 / page no 14 / 6.14 1055 0 0

10 INTERNAL PLASTER

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 Sqm vol 2 /page no 41 /8.1.1 253 0 0 0 0

11 EXTERNAL PLASTER

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 Sqm vol 2 / page no 42 / 8.9 382 0 0 0 0

Providing and applying white cement based putty Sqm vol 2 / page no.50 /8.51 100 0 0 0 0 0

13 DELUXE MULTISURFACE PAINT FOR INTERIOR

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on wall Sqm vol 2 / page no. 46 / 8.33.1 158 0 0 0 0 0 0

14 ACRYLIC EMULSION FOR EXTERIOR

Finishing walls with 100% Premium acrylic emulsion paint Sqm vol 2 / page no. 46 / 8.32 156 0 0 0 0 0 0

15 PAINTING TO WOODWORK

Painting wood work with Deluxe Multi Surface Paint with prime coat Sqm vol 2 / page no. 46 / 8.33.2 138 0 0 0

16 PAINTING TO STEEL WORK

Painting Steel work with Deluxe Multi Surface Paint with prime coat Sqm vol 2 / page no. 47 /8.33.3 139 0 0 0 0 0

17 VITRIFIED FLOORING FOR TOILETS

Providing and laying Vitrified tile floor tiles of Size of Tile 600x1200 mm Sqm vol 2 / page no.61 / 9.17.5 1340 0 0 0

18 VITRIFIED FLOORING FOR ROOMS

Providing and laying Vitrified tile floor tiles of Size of Tile 600x1200 mm Sqm vol 2 / page no.61 / 9.17.5 1340 0 0 0

19 COLOUR GLAZED TILES DADOING

Providing skirting, dadooing, rises of steps with colour glazed tiles (600mmx1200mm) Sqm vol 2 / page no. 65 / 9.39 1446 0 0

UPVC WINDOWS Providing & fixing of 2.5-track x 2-panel sliding windows Sqm vol 2 / page no. 110 / 12.89 6551 0 0 0

21 STEEL BARS (Fe-550d)

Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work refer revised Sr rates 1st quarterly 2026-2027

22 STEEL WORK (GRILL WORK)

Providing and fixing M.S. grills of required pattern in frames of windows Kg vol 2 /page no.86 / 11.34B 183 0 0 0

23 TEAK WOOD FRAME

Providing Teak wood frames of doors Cum SR 2021-2022vol 2 /page no. 99 / 12.10 235649 0 0

24 WPC DOOR SHUTTER Sqm (vol 2 /page no.112 / 12.94.2) 4041 0 0

Providing and fixing 35 mm thick wpc door shutter.

25 WPC DOOR FRAME

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other FramesDoor frame of size 62x150mm m (vol 2 / page no.111/ 12.93.3) 807 0 0

26 WPC DOOR SHUTTER

Providing and fixing 30 mm thick wpc door shutter. Sqm (vol 2 /page no.112 / 12.94.1) 3485 0 0 0

27 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos vol 2 / page no.105 / 12.58 120 0 0 0

28 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. Nos vol 2 /page no. 105 / 12.61 990 0 0 0

29 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete Nos vol 2 / page no.105/ 12.62 237 0 0 0

DOOR TOWER BOLTS

30 Providing and fixing aluminium tower bolts, ISI marked, anodised Nos vol 2 / page no.105 / 12.63 130 0 0 0

DOOR BUTT HINGES

31 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : Nos vol 2 /page no. 107 / 12.74.1 102 0 0 0

32 WATERPROOFING

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Sqm vol 2 / page no.149 / 15.1 817 0 0 0

33 CUDDAPAH SLAB

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. Sqm (vol 2 /page no. 64 / 9.36) 1646 0 0

34 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with ....bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.SR 2023-24 Vol-2 page63 Sl. No 9.25 m2 SR 2023-24 Vol-2 page63 Sl. No 9.25 800 0

PLUMBING & SANITARY WORKS

1 INDIAN WC PAN

Providing and fixing water closet squatting pan (Indian type W.C. pan ) : Each vol 2 / page no. 131 /14.1.1 4884 0 0 0

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

2 EUROPEN WC PAN

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, Each vol 2 / page no. 131 /14.3.1 5977 0 0 0

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, Each vol 2 / page no. 132 /14.7.1 3082 0 0 0

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

4 STAINLESS STEEL KITCHEN SINK

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel Each vol 2 /page no. 133 / 14.10.1.1 5618 0 0 0

510x1040 mm bowl depth 250 mm with drain board

5 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Each vol 2 / page no. 135 /14.22 115 0 0 0

6 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm Each vol 2 / page no 136 / 14.28.2.1 92 0 0 0

7 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each vol 2 / page no 136 /14.29 47 0 0 0

8 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete Each vol 2 /page no 136 /14.31 1220 0 0 0

9 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Each (vol 2 / page no.127 /13.59) 220 0 0 0

10 Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a.economy Each (vol 2 / page no.144 /14.86a) 463 0 0 0

11 Providing and fixing Wall Mixer Telephonic with L Shaped tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a.economy Each (vol 2 / page no.143 /14.77a) 4506 0 0 0

12 Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a.economy Each (vol 2 / page no.143 /14.81a) 1081 0 0 0

13 Providing and fixing Single lever sink cock (Lifting type cold water cartridge) with swivel spout and wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a.economy Each (vol 2 / page no.142 /14.73a) 1752 0 0 0

14 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : Each vol 2 / page no.117 /13.5.3 332 0 0 0

25 mm nominal bore

15 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(SYNTEX TANK) L vol 2 / page no.123/ 13.34) 9 0

16 Providing and fixing 8 mm dia C.P. / S.S. Jet . Each (vol 2 / page no.134 / 14.16A) 272 0 0 0

17 Providing and fixing Bib cock Two way Class a.economy FOR WC Each (Vol 2/ Page 140/14.56 a) 1928 0 0 0

18 Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a. economy FOR UTILITY Each (Vol 2/ Page 139/14.55a) 1117 0 0 0

19 Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a. economy Each (Vol 2/ Page 139/14.54a) 1081 0 0 0

20 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter Mtr (Vol 2/ Page 125/13.48) 291 0 0 0 0 0

WC outlet pipes 100mm dia

21 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 80 mm nominal dia pipes Mtr (Vol 2/ Page 125/13.50.8) 674 0 0 0 0 0

wash basin NP grating outlet pipes 80mm

22 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter Mtr (Vol 2/ Page 125/13.48) 291 0 0 0 0 0

Rain water downtake pipe 100mm dia

23 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia pipes Mtr (Vol 2/ Page 125/13.50.4) 272 0 0 0 0 0

inlet pipes APVC 1.25" dia 32mm

24 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes Mtr (Vol 2/ Page 125/ 13.50.2) 172 0 0 0 0 0

inlet pipes APVC 20mm dia

25 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia pipes Mtr (Vol 2/ Page 125/13.50.5) 304 0 0 0 0 0

OHT inlet 40mm dia APVC

26 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : Nos (vol 2 / 117 / 13.4.1) 549 0 0

25 mm nominal bore

27 Constructing brick masonry chamber for underground C.I. inspection chamber Inside dimensions 455x610 mm and 45 cm deep Nos (vol 2 / page no.126 / 13.53) 5642 0

PROPOSED GROUP D WORKER'S QUARTERS FOR KITTUR RANI CHANNAMMA RESIDENTIAL SAINIK SCHOOL FOR GIRLS AT KITTUR-591115

RECAPITULATION SHEET

TOTAL ESTIMATION

1 COST OF CIVIL ESTIMATION Total Rs.

2 COST OF PLUMBING ESTIMATION Total Rs.

3 COST OF ELECTRIC ESTIMATION Total Rs. 1304000

INCLUSIVE OF 18% GST Grand Total Rs.

(RUPEES TWO CRORE TWENTY FIVE LAKHS & THIRTY FIVE THOUSAND ONLY)