MISC/REPAIR/REPLACEMENT OF FLOORING PLASTERING JOINERY CLEANING OF SEWAGE LINE MANHOLE LINE DRAIN AND PERIODICAL SERVICES IN CERTAIN BLDGS OF NCC PATNA

Amount

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L rendering 15mm thick in two coats(10mm thick base coat and 5mm finishing coat) in cement mortar 1:4 with using water proofing compound on brick work or concrete surfaces and finishing the surface even and smooth. witrhout using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid seperately).

M&L rendering 10mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and as directed

M&L for 2mm thick Birla / JK Putty in two layer on old plaster surface of wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on plaster surface of wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and as directed

M & L for preparation of newly plastered surfaces of ceiling and applying 2 mm thick wall care putty including preparation of new surface complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on prepared surface of ceiling over a coat of primer including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying two coat of Oil Bound Distemper of any light shade complete all as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of external walls of any description by washing, rubbing down and applying one coat of weather coat paint (Apex) complete as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed with white or coloured cement to match the shade etc.complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed with white or coloured cement to match the shade etc.complete all as specified and directed.

M&L for glazed/digital coloured ceramic tiles 450 x 300 x 7/450x350x7mm thick as in vertical surfaces such as dado / skirting etc. over and including 10 mm thick plaster in cement mortar 1 : 4 as a backing coat for fixing of wall tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade etc. complete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles complete all as specified & directed. Make : Somany/Johnson/Kajaria/Orient

M&L for 10mm thick Light shade vitrified tiles in skitting/dado exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement and incl 10 mm thick rendering or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles complete all as specified & directed. Make : Somany/Johnson/Kajaria/Orient

Demolition stone slab and tiles of any description or thickness in floors, dado/skirting and apron etc laid bedded and pointed in any mortar complete all as spd and directed.

M & L Pre polished machine cut Kota stone (table rubbed mirror finished ) slab flooring 20-25 mm thick over cement screet base , laid and jointed with grey cement slurry mixed with pigment to match the shade of the kota stone slab with 20 mm thick screed bed or bedding layer in cement mortar 1 : 6 for laying kota stone finished even and rough complete all as specified and directed.

M & L Pre polished machine cut Kota stone (table rubbed mirror finished ) slab flooring 20-25 mm thick over cement screed base , laid and jointed with grey cement slurry mixed with pigment to match the shade of the kota stone slab with 15 mm thick rendering in cm 1 : 4 as rough surface on vertical surface as backing coat of kota stone complete all as specified and directed.

M & L For Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with 15 mm thick screed bed or bedding layer in cement mortar 1 : 6 for laying kota stone slab finished even and rough complete all as specified and directed.

M & L For Machine cut kota stone slab flooring 20-25mm thick in riser of steps Skitting dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with 15 mm thick rendering in cm 1 : 4 as rough surface on vertical surface as backing coat of kota stone slab complete all as specified and directed.

M&L for granite stone slab 20mm thick(table rubbed and polished) in cooking platform floor and like in cement mortar 1:4 including pointing in white cement(1:2) using marble dust making holes in RCC shelves suitable for gas pipe with round edges where required including 15mm thick screed bed in CM 1:4 complete all as directed.

M & L for 20 mm thick machine cut granite stone slab as in floor and bedded, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding polishing complets. including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for 20 mm thick machine cut granite stone slab as in skirting / dado, over cement screed bed and jointed with grey cement slurry and pointed with white or coloured cement pigment to match over and including 10mm thick on backing coat in CM 1:4 complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) , as in sub top layer of floor and finished rough to receive the floor tiles.

Demolition of cement concreate(un reinforced) in ground floor and paving exc 15 cm thickness (below or above ground level ) & removal of rubbish material complete all as specified and directed .

M&L 75 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed..

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation and getting out in soft/loose soil complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed) following dia of pipe set in cement mortar and taking out from trenches including demolition of PCC bedding complete all as specified and directed by Engr-in-Charge.

150 mm dia of bore

200 mm dia of bore

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregated) bed to drain pipes including packing under and haunching against the sides of the pipes after laying and testing for the following dia of pipes.

150 mm dia.

200 mm dia

M & L for reinforced cement concrete pipe Spigot & socket type, class NP-2, laid & jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed for the following size :-

150 mm dia.

200 mm dia

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing of excavated soil material to distance n. exc 50 m and depositing where directed at a level n. exc 1.5 above the starting points complete all as specified and directed by Engr-in-Charge.

Cleaning, removing all scale, dust, dirt and elgy using with wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching power solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black/white paint on white/black base on tank "Tank cleaned on ____ Dt_____". Capacity 500 Ltrs all as directed by Engr-in-Charge.

All as per item No 37 above but capacity 1000 litres.

Cleaning of sewage line and connected manholes (any length) from manhole to manhole, manhole to septic tank septic tank to soakwell (n. exc 50 mtr) by roding and well flushing after cleaning and removing mud / sludge etc and burried it in pits and disposed off the same outside defence area complete all as specified for 200 mm bore of pipes.

Blocking up the entry of manholes of any size and depth and pumping out effluent dirty liquid and sludge from bottom of manholes incl. collecting sludge and dirty liquid into closed container and cleaning the manholes with fresh water after wards opening the inlet of manhole for re-use and lifting the sludge to outside premises, of MoD Land Complete all as specified and directed. NOTE :-The rate included transportation, loading and unloading if required.

M&L for dewatering of efflorescent from soak well of any capacity by means of 7.5 HP non clogging diesel driven pump (including necessary fuel and T&P etc) in nearest drain complete all as specified and directed .

Cleaning of blockage of WC /GullyTrap/Nahani Trap/Floor Ttrap any other similar kind of items complete all as specified and directed.

Hacking out old broken glass(any thickness size quality or description) from wooden or steel frame glazed fixed with putty or fixed with beads etc.

S & F sheet glass 4mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete .

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete.

S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 (20 mm stone graded aggregate) and connection pipes (excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC).

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete.

S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including mild steel brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete.

S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete.

S&F in repair bib tap 15 mm bore, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed

S&F in repair cast copper alloy CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete.

S&F in repair of stainless steel soap dish, of standard size and shape complete.

S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) cascade type of size 380 X 700 X 665 mm coloured/white with cistern (with twin flush fittings) complete including seat cover and fixing of flushing cistern, brackets, flushing pipe etc, fixed in repairs, complete all as specified and directed (Make : Jaquar cat part no CNS WHT 851P180SPP or equivalent in Prayag Polymer Pvt Ltd)

S&F in repair vitreous cabinet china wash hand basin, flat back with cabinet one No pvc waste pipe 25mm dia and 75 cm long with 32 mm dia connector, 32 mm size waste fitting, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and pvc connection 15 mm dia & 600mm long with two Nos check nut washer complete including cutting for and pinning in ends of bracket or erecting stand completed all as apecifed and directed.

S&F in repair 15mm bore Pillar cock for wash hand basin with left hand operating knob with 450 long Braided house and fixed complete all as specified and as directed. Make : Jaquar CON -127BKN or equivalent in Prayag Polymer Pvt Ltd.

S&F in repair CP angle stop cock 15 mm with wall flange complete all as specified and directed. Make : Jaquar CQT-23059 or equivalent in Prayag Polymer Pvt Ltd.

S&F in Wall mixer with provision for overhead shower with 115 mm long bend pipe on upper side connecting legs & wall flanges. complete all as specified and as directed. Make : Jaquar FUS - 29273UPR or equivalent in Prayag Polymer Pvt Ltd.

S&F in repair overhead shower 150x150mm squarel shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rack with lower hanger (stainless steel) with hook complete all as specified and as directed.Make : Jaquar CHR - 1581H or equivalent in Prayag Polymer Pvt Ltd.

S&F CP towel ring round with round flange & iron CP brass screw and wooden/plastic cleats complete all as specified and as directed. Make : Jaquar CAN-1121BN or equivalent in Prayag Polymer Pvt Ltd.

S&F glass shelf 600mm long including fixed with CP brass screw and wood cleats / rowel plug with wall complete all as specified and as directed. Make : Jaquar CAN-1171N or equivalent in Prayag Polymer Pvt Ltd.

S&F in repair 15mm bore Stop valves, fancy type cast copper alloy chromium plated,screwed down,high pressure,with crutch or butterfly handle,cast or forged variety opening full way,screwed both ends for iron pipe or for unions and fixed

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pie with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F toilet paper holder with flap recessed type stainless steel complete all as specified and as directed.

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

S&F 100 mm dia grating doom of stainless steel complete all as specified and as directed.

S&F Corner glass shelf 300mm (with brass brackets) including fixing arrangements complete. Make-Prayag or equivalent (Cat No BEA-44)

Dismantling of AC/PVC/CI pipes upto 150 mm bore in cement mortar from walls including all type of bends/branch pieces complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) pipes single socket in any length with carefully prepare rubber ring joints (or solvent joint) fixed to walls, ceiling or laid in floor compound complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socket in any length with carefully prepare rubber ring joints (or solvent joint) fixed to walls, ceiling or laid in floor compound complete all as specified and directed.

PVC (SWR) bends any radius ,dia of bore 110 mm complete all as specified and directed by Engr-in-Charge.

Ditto as above but 75 mm bore

S& F PVC(SWR) jnctions single(SingleT) equal or unequal, dia of bore 110 mm complete all as specified and directed by Engr-in-Charge.

PVC (SWR) 'P'/ `S trap bore 110mm/100mm complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks and removing to store of capacity exc 250 and n exc 500 ltrs all as spd.

Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs all as spd.

S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity all as spd.

S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity all as spd.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete.

Dismantling structural steel work in cluding doors,gates but excluding framed truss et

S & F Steel rolling shutters, (Thickness of laths in 1.00mm) with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed by engineer in charge

S & F Safety lever locks mild steel with 4 Lever for rolling shutter.

S & F ball bearing for rolling shutters.

Material & Labour for stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing polishing and making curvature (where ever required) and fitting the samewith necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but n exc 2 sqm each .complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutter from the frame) exc 1.5 sqm but n exc 4.0 sqm each complete all as specified and directed.

S&F Plain,1st class hardwood solid, straight chowkats and frames, wrought, framed rebatedon the solid, rounded or chamfered,put together with glue pinned atjoints,complete all as specified and directed.

S & F Plain, framed, 30 mm thick panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or 9mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats 1st class hardwood rail and style complete all as specified and directed.

S & F 35 mm thick 1st class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete.

S&F flush shutter, 35 mm thick, solid core construction with block board core, and ply wood face panels but both face is covered with decorative laminate face veneer with lipping complete all as specified. Make : Century Plywood/Kit Ply

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Butt hinges extruded aluminium anodised alloy with galvanised hinge pin size 100mm complete all as specified and directed

S&F for 100 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100 mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F 200mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F 150 mm long anodised aluminium handles, cast type complete all as specified and directed.

S&F 250 mm long, aluminium alloy, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast for extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S & F 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as directed

S & F for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed (a) chowkhat frame of size 83.50 x 44.45 x 1.87 mm thick weight @ 1.30Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.90 mm thick weightn @ 0.911Kg/RM (c) Top and bottom rail of size 95.25 x 44.45 x 2.00 mm thick weight @ 1.511kg/RM (d) Middle rail of size 49.91x 44.45x 2.01 mm thick weight @ 1.072Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter. (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 92 x 31.75 x2 mm thick weight @ 0.1.490Kg/RM (b) Style/Vertical member of size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM (c) Top and bottom rail of size size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S&F anodized aluminium grill (diamond shape of approx size 100x100mm) made out of aluminium flat of size 4x5mm as approved by Engr-in-Charge/GE for window/ ventilators etc complete all as specified & directed.

S&F aluminium partition wall with following specificaiton complete all as specified and directed by Engr-in-Charge : (a) Vertical member of size 63.50 x 38.10 x 1.85mm @ 1.095 Kg/RM (b) Horizontal, top,middle and bottom member of size 63.50 x 38.10 x 1.95 mm @ 1.092Kg/RM (c) Partialy 9mm thick prelaminated particle board both side decorative (d Partialy 5.5mm thick tinted glass. (e) Aluminium and PVC beading as per requirement as in fixing for particle board and glass.

S & F steel windows with side hung shutter incl box type butt hinges with bow handle,steel peg stay, tower bolts ( each shutter having two tower bolts 100mm long ) complete (with glazing bars) dovetailed or welded including mild steel flatiron complete all as specified and as directed.

~Ditto~ all as per item No 110.00 above but without glazing bars complete as specified and as directed.

Taking up or down steel tubing 15 mm dia and connections including cleaning for re-fixing or removal to store etc for following bore:-

Taking up or down steel tubing 20 mm dia and connections including cleaning for re-fixing or removal to store etc for following bore:-

Supply & laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings and wall / ceiling or laying in floors complete all as specified

Supply & laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings and wall / ceiling or laying in floors complete all as specified

Dismantling wrought iron or mild steel workof any description not otherwise provided for

Dismantling Asbestos cement Sheets (corrugated, semicorrugated,translucent corrugated etc.) sheets in roof coverings Including ridges all as directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by E-in-Charge.

S&F for pre painted galvalume sheet aluminium zinc coating GI based Corrugated steel sheet with coverd type 0.50mm thick of approved colour having tensile strength of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by E-in-Charge

S&F for pre painted galvalume sheet aluminium zinc coating GI based Corrugated steel sheet (Mangalore pattern )with coverd type 0.47mm thick of approved colour having tensile strength of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by E-in-Charge. Make- Tata & jindal or equal vailent

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed.

S&F Gl frame work powder coated for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and size of grid 605mm x 605mm complete for false ceiling all as specified and directed by Engr-in-Charge

S & F non asbestos fibre cement building board fixed or/laid/inserted to timber/ GI aluminium frame work with screw 6mm thick complete all as specified and directed.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S & F Soild pvc wall lining consisting of 5mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame as per specification and drawing

S & F 5mm thick pvc sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make pvc frame as per specification and drawing

Demolition of brick work built in cement mortar or cement lime mortar including removal to a distance exc 250 m but n.exc 500 m complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:4 in half brick thick wall. complete all as specified and as directed.

M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one coats

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying one coats of synthetic enamel paint complete all as specified and as directed.

PAPPU ROY CONSTRUCTION (BID ID -3125791)