Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.3 LAccepted-AOC H NO 113 APR COLONY KATANGA CANTT JABALPUR M P PIN 482001 | JABALPUR | MADHYA PRADESH | 482001 | L1 | Accepted-AOC L1 bidder lowest | |
| 2 | L2₹48.7 L+₹20,467.50 (0.42%)Rejected-Finance 44 EKTA NAGAR MP 4 ROAD JABALPUR MP 482002 | JABALPUR | MADHYA PRADESH | 482002 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹49.4 L+₹91,700 (1.89%)Rejected-Finance 1257 SCHEME NO 5 NEAR HB COLLEGE VIJAY NAGAR JABALPUR MP PIN 482002 | JABALPUR | MADHYA PRADESH | 482002 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹52.6 L+₹4.1 L (8.41%)Rejected-Finance BLOCK NO 403 BENGALI COLONY RANJHI JABALPUR | JABALPUR | JABALPUR | MADHYA PRADESH | 482005 | L4 | Rejected-Finance Other than L1 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
2 Sept 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Jabalpur
Garrison Engineer (West) Jabalpur Supply Marg Post Box No.54 Jabalpur Cantt-482001 (MP)
REPAIR TO JOINERY AND CONNECTED ITEMS IN AREA OF AGE B/R-II UNDER GE (W) JABALPUR
2023_MES_612329_1
8606/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Jabalpur
As per tender documents
7 documents required · 7 mandatory
₹500
GE (West) Jabalpur
₹98,000
18 Sept 2023
5 Aug 2023
7 Sept 2023
7 Aug 2023
2 Sept 2023
19 Aug 2023
7 Aug 2023 - 14 Aug 2023
Amount
Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.
S&F 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-charge.
S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.
S&F 4 mm thick sheet glass, ordinary quality and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.
Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed.
Taking down chowkat or frame with shutter (without taking of shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and directed.
Taking down chowkat or frame area exceeding 1.5 Sq mtr but not exceeding 4.00 Sq mtr each complete all as specified and directed.
Taking down Shutter of area exc 1 sqm but n.exc 2 Sqm each complete all as specified and directed.
M&L for pressed steel door frame size 125 mm x 60 mm and 1.25 mm thick including necessary fixing lugs, hinges, lock strike platee etc., including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specification including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete, as spd and as directed.
S & F powder coated (min thickness of powder coating 50 micorn) Aluminium door, window,ventilator frame with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete, as spd and as directed.
S&F powder coated of any colour aluminum door shutters, aluminium section weighing 0.55 Kg/ Rm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F powder coated aluminum window and ventilator shutters, fixed type without sash bars, aluminium section weighing 0.55 Kg/ Rm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. including making good to the disturbed surfaces complete all as specified and directed.
S & F factory made 100% Solid Wood plastic composite (WPC) Door frame 90mm x 45mm made from wood plastic composite (Single Extruded Process) material with density 780Kg/Cbm & manufactured by Rajshri Plastiwood, Pithampur (MP) an ISO 9001 - 2015 Certified Company, all as per specification drawings and as directed by the Engineer-in-Charge Door should be water proof, Termite Proof, Fire Retardant & having good screw holding capacity including making good to the disturbed surfaces complete all as specified and as directed.
S & F.Providing SOLID PVC DOUBLE DOOR FRAME (CHOUKHAT) of size 120mm x 50mm with a wall thickness of 5mm (+0.25mm), made out of extruded 5mm (+0.25) mm thick PVC Sheet of density 600Kg/Cbm manufactured by an ISO 9001 - 2015 certified company and by joining 3 Nos. heat mouleded PVC Sections. The hinge section of size 35 x 35mm shall be made from plain colour PVC Sheet of 5mm (+0.25) thichness. The inside section will be covered with 5mm thich PVC sheet 'C' shape covering section of size 120mm x 50mm. At center top position 5mm (+0.25) thick 50x50x50mm pattam section should be pasted with solvent cement adhesive to make double pattam of frame. The frame shall be mitre cur at to corners & jointed with 4 Nos of 150mm long 'L' brackets of 19x19mm MS sq Tubeor fusion heat welding process. The two vertical doors frames are to be reinforced with 25x25mm MS sq Tube of 19 guge throughout the frame. The door frame shall be fixed to the wall using 8/100 mm fishcher screws. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc. including making good to the disturbed surfaces complete as per manufacturer's specification & direction of Engineer-in-charge
S&F 35 mm thick Plain framed factory made pannel door shutter ( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS 1003 ( Part-I) , kiln seasoned and chemically pressure treated.including making good to the disturbed surfaces complete all as specified and directed
S&F 35mm thick factory made second class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc divided into squares with plain chamfered or roundded mitred and rebated sash bars any numbers and fitted to chowkates including making good to the disturbed surfaces complete all as specified and as directed.
S&F 30 mm thick PVC flush door shutter having one side lamination with 5mm thick rigid PVC prelaminated sheet and 2mm thick plain rigid PVC sheet on other side consisting of frame made out of MS tubes of 19 guage thickness and size of 19 mm x 19 mm for stiles wa well as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multi chamber Hollow PVC section, bonded using solvent cement/eynoacrylate adhesive with 5mm (+_0.25) thick Prelam PVC sheet of denisity 600 Kg/Cbn manufacured by an ISO-9001-2015 certified company, on both side of the inside panel. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of MS tube other hardware's should be fixed with 25 mm x 8 mm size steel screws etc all as per direction of Engineer-in-Charge
S&F of 30mm thick "FACTORY MADE WIRE MESH SOLID PVC DOOR SHUTTER consisting of frame made out of M.S. Tubes of 19 guage thickness and size of 19mm X 19mm for stiles and 15mm X 15MM for top, bottom & lock rail. M.S. Frame shall have a coat of metal primer of approved make & manufacturer. 19mm x 19mm M.S. squqre tubes shell be covered with heat moulded plain sheet 'C' channel made from 5 mm (+0.25) thik PVC sheet of density 6 KG/Cbm Manufactured by an ISO-9001-2015 certified Company, of size 30 mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be bent in 90o angle on either side forming stiles, one of the 90o bend edge is cut from stiles as well as rails to nail from inner side of door to hide wiremesh fixing steel screws. 5mm (+0.25)thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on the inner side to from top and bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on both side to form lock rail. An additional 5mm (+0.25) thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive. Panel will be of /gi/SS wiremesh of 24 gauge to be fitted inside area of stiles & rails. The wiremesh in top, bottom & rock rail is sealed with 15mm X15mm tube with steel screw of size 13/6mm. 10mm (5mm x 2 Nos) thick PVC strip of 25mm width is to be stuck & nails on both side of GI wiremesh interior at the top, bottom & rock rail. 10mm thick (5mm x 2nos) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screw drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6mm size steel screw etc. including making good to the disturbed surfaces complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.
S&F 24 mm thick PVC flush door shutter having one side lamination with 2mm thick rigid PVC prelaminated sheet and 2mm thick plain rigid PVC sheet on other side consisting of frame made out of MS tubes of 19 guage thickness and size of 19 mm x 19 mm for stiles wa well as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multi chamber Hollow PVC section, bonded using solvent cement/eynoacrylate adhesive with 5mm (+_0.25) thick Prelam PVC sheet of denisity 600 Kg/Cbn manufacured by an ISO-9001-2015 certified company, on both side of the inside panel. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of MS tube other hardware's should be fixed with 25 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge
S&F steel windows with side hung shutters incl box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed
S&F steel windows with side hung shutters factory made incl box type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed
S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and as directed.
S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.
S&F framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing and incl steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete conferming to gde Fe 410-w complete all as specified and as directed.
Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.
M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M & L preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whitening primer complete all as specified and as directed.
M & L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.
S&F Mild Steel flat iron as in hold fast complete all as specified and as directed.
S&F for galvanised MS wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F in repair galvanised MS wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F 100 mm long aluminium butt hinges alloy with galvanised ms hinge pin, anofised and fixed type C-21 complete all as specified and as directed.
S&F 150mm long aluminium anodised barrel tower bolt and fixed complete all as specified and as directed.
S&F 150 mm long aluminium anodised handle cast type and fixed complete all as specified and as directed.
S&F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
M&L two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surface over 10 cm width or girth all as specified and as directed.
M&L cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 complete all as specified and directed.
S&F in repair 18mm prelaminated coloured solid PVC sheet suitably fixed in MS angle frame work as in cup board , Cabinate ,Drawer etc as per manufacturer specification and drawings complete all as specified and directed. Note :- Mild steel frame work shall be measured and paid separaetly.
S&F continious(Piano) hinges, mild steel,bright finish or electrogalanised,width of flap 30mm when open complete all as specified and as directed.
S&F 150 mm size brass handles, cast type, polished bright complete all as specified and directed.
S&F magnetic stopper suitable for cupboard, dressing table fixed with screws complete all as specified and directed.
M & L for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
S & F door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight upto 80 Kg of aluminium (Die cast) body complete all as specified and directed.
S & F in 300 mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S & F in Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 150 mm complete all as specified and as directed.
S&F door seal ubber of size not less than 1.00 mtr length complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
Ditto all as per Srl item above but except brick complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms,window sill and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.
kamakshi construction
Sachdeva Enterprises
J.P ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .