REPAIR REPLACEMENT OF BLDG HARDWARE PANELLING CUP BOARD FLOORING AND OTHER MISC B R WORKS

Amount

SCHEDULE A BOQ

Taking down Chowkats or frames with shutters(Without taking off shutters from the frames) not exceeding 1.5 Sq. M each complete all as specified and directed.

Taking down Chowkats or frames with shutters(Without taking off shutters from the frames) exceeding 1.5 Sq. M each but n exc 4 sq.m each complete all as specified and directed.

Taking down shutters of any description from the frames exceeding 1.0 Sq. M each but n exc 2 sq.m each complete all as specified and directed.

Minor repair to aluminum/ glass doors, windows, partitions and making good the same (i.e. Handels, hings, rubber beadings, clips etc) complete all as specified and directed.

Resecuring without taking down chowkhats or frames with shutters without taking off shutters from the frames) not exc 1.5 sqm each

Resecuring without taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each.

Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling & fixing in opening as per specificatioon and drawing

Taking down shutters of any description exc 1 sqm but n. exc 2.0 sqm and refixing in the same location complete all as specified and as directed.

Flush shutters,30mm thick, solid core construction, with particle board core and ply wood face panels, commercial type on both sides, complete all as specified and directed.

Second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, se-cured with nails or brads in section area 6 sq.cm but not exc 13 sq cm including taking down exisiting one

75MM long medium weight, stainless steel, butt hinges all as specified and directed.

75mm long medium weight, stainless steel, butt hinges fixed as in repair and welded to metal frame n exc. 2.5 cm in length and n exc 6 mm of metal thickness.

Taking down the existing locking system, contains any number of levers replacing the strucked/damaged levers, applying oil to all parts and making functional properly and refixed in position complete all as specified and as directed

Mortice lock brass 4 levers vertical type of size 100mm fixed as in repair

Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified.

150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor 150mm complete all as specified and as directed by Engneer-in-Charge

Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor 150mm Including taken down existing one complete all as specified and as directed by Engneer-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material Supply and fixing 4mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares exc. 0.50 Sqmtr each pane complete all as specified and as directed

Easing of door shutters for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engineer-in-Charge, Size of door upto 2 Sqm single leaf or double leaf.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed by Engineer-in-Charge, size of window upto 1.5 Sqm.

Stainless steel peg set of having 5 pegs powder coated fixed to wall surface with PVC plug and screw including taking down existing one complete all as specified and directed

Repair to door by supply and fixing bottom rail of second class hard wood 35mm thick including making of grooves and fixing new bottom rail by replacing defecting rail using fevicol and wooden pinning

2.00mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottlrd finish, laid with approved rubber based adhesive in floors including taking down existing one complete all as specified and directed

Vitrified Ceramic tiles 10 mm thick, dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer ,15 mm thick in Cement Mortar 1:6 including taking down existing tile and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Note : (a) Vitrified tiles are classified under group B1a of the international Standard for ceramic tiles ISO: 13006. Tiles shall be hard, dense, impervious and frost resistant. Water absorption of tiles shall be less than 0.5% and flexural strength (Modulus of Rupture) shall be more than 35 N/Sqmm. (b) The manufacturer's test certificate and individual test certificate for tiles must be submitted for approval by the concerned authority prior to installation.

Door closer hydraulically regulated designation No. 3, universal type, Aluminium body (extruded section), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed including taking down existing one all as specified and directed.

Coloured tinted float glass and glazing, 5.5 mm thick with oil putty in squares not exceeding 0.5 Sq.m in each pane, with glazing clips and oil putty, including taking down existing one complete all as specified and directed.

25 mm dia mild steel powder coated drapery rod cut to length required without joint in between and fixed at openings as directed

Mild steel powder coated fancy type end brackets fixed at both ends of drapery rod same colour and type of drapery rod as directed.

Mild steel powder coated fancy type holding brackets flat 20mm wide for holding the drapary rod and fixed to wall with MS srew as specified and as directed

40 mm dia cupboard knobs fixed with nut, screw and washer of brass polished all as directed.

Brass 4 lever cupboards locks grade I size 65 mm all as directed.

High or low level flushing cistren 10 ltrs capacity & connections to pipes & fixing of chain & pull or lever after cleaning inside of all dirt, scale formation, replacement of rubber washers, stopping of leakage etc including taking down existing one complete all as specified and as directed

Preparation of new or previously untreated steel surfaces over 10 cm girth and applying two coats of synthetic enamel paint including one coat of red oxide primer

Aluminium anodized hasp and staples safety type with mild steel hinge pin incl bolt to hinge plate fixed with screws of 100mm length including taking down existing one all as directed.

Continuous (piano) hinges, stainless steel bright finish or electrogalvanised of 40mm width of flaps (when open) including taking down existing one.

Arboart collection luxury vinyl planks of size 6'x36' (152.4mmx914.4mm) 7.25"x48" (184.mm x 1219.2mm) having an overall thickness of 2.00mm with an wear layer of 0.30mm thickness the fire resistance of which should be class I , as wall clading which is structurally stable, clean levelled dry and free from dust, dirt wax, grease or any other foriegn material with a water based ahdesive, roled thereafter with a 560 Kg roller. Make Armstrong works Industries or equivalent as approved by GE (incl demolation of old wall panelling including suitable frame as directed by manufacturers/Enginer-in-Charge by providing with angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. and dismantling existing one complete all as specified and as directed.

Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 80mm thickness M-40 grade, laid over and including M sand cushion of 50mm thick,and providing cement concrere 1:2:4 type B1 in kerbs or rounded or chamfered on edges complete all as specified and directed. Note : (a) The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. (b) The manufacturer's test certificate and individual test certificate for tiles must be submitted for approval by the concerned authority prior to installation.

Hard core of broken/crushed stone aggregate of gauge n.exc 63 mm deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil all as directed.

Cement concrete (1:3:6) type C-1 (20 mm graded aggregate) as in foundation filling and mass concrete all as directed.

Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt,welded tubes conforming to IS 1161-1979 grade ST-240 including dismantling of existing steel complete all as specified

Hand rails , half round or other steel section or core for wooden hand rail straight portion ,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps, incl embedding to concrete and screwing etc. wind ties for roof including securing bolts ,posts and struts in fencing including cutting tops to shape as directed ,drilling holes notching for wire etc. flat iron fillets (for securing wire mesh etc ) incl all necessary drilling ,bolting or riveting etc and similar work confirming to Fe- 290 Gde E-165 including dimantling of existing one all as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm and dia of neck 11 to 15 mm including taking down existing one complete.

Mild steel sections in hold fasts, clamps, wind ties and similar small articles confirming to Fe 410-0 or Fe 310.0 complete all as specified and directed.

Mild teel chromium plated tube 15 to 20 mm dia with fixing L brackets etc complete including taking down existing one all as specified and directed

Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm for WHB including taking down existing one Complete all as specified and as directed

CP Soap dish including taking down existing one Complete all as specified and as directed CAT Part No-ACN-1131N of jaguar or equivalent make of Parriware /Hindware

Brass 4 lever cupboards locks grade I size 65 mm including taking down existing one all as directed.

Repair to door by supply and fixing lock/ middle rail of size 200mm wide of second class hard wood 35mm thick including making of grooves and fixing new bottom rail by replacing defecting rail using fevicol and wooden pinning

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete including taken down existing one complete all as specified and as directed by Engineer-in-Charge.

150 mm long Brass barrel towel bolts, with cast or sheet barrel and rolled or cast bolts and fixed including taking down existing one complete all as specified and directed

125 mm long Brass barrel towel bolts, with cast or sheet barrel and rolled or cast bolts and fixed including taking down existing one complete all as specified and directed

5mm thick rubber beading strips of entrance doors having width exc 3CM to not exc 5CM to arrest entry insects including taking down existing one complete all as specified and as directed

Resecuring of easing & adjusting without taking down shutters of n exc 1 sqm each

Resecuring or easing & adjusting without taking down shutters of exc 1 Sqm but n exc 2 Sqm each

Applying two coat of synthetic enamel paint over a coat of pink primer of any description over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed.

Note :- (a) All synthetic enamel paint, plastic emulsion paint shall be of 1st quality manufactured by the standard firms of make as specified.

(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.

(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE.

(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite)

(e ) Unless otherwise specified the tints of paint shall be as approved by the GE

(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.

(g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge.

Vitrified Ceramic tiles 10 mm thick, dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting/dado. etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer ,10 mm thick in Cement Mortar 1:3 including taking down existing tile and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Note : (a) Vitrified tiles are classified under group B1a of the international Standard for ceramic tiles ISO: 13006. Tiles shall be hard, dense, impervious and frost resistant. Water absorption of tiles shall be less than 0.5% and flexural strength (Modulus of Rupture) shall be more than 35 N/Sqmm. (b) The manufacturer's test certificate and individual test certificate for tiles must be submitted for approval by the concerned authority prior to installation.

Pre painted Coloured Galvalume roofing system sheet 0.50 mm thick having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws including dismantling of existing roof sheet complete all as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of existing roof sheetas specified

Note for Pre-painted coloured Galvalume roofing :-

(i) The manufacturer's test certificate and individual test certificate for the chemical and mechanical properties of sheet must be submitted for approval by the concerned authority prior to installation.

(ii) The contractor shall ensured that no leakages take place from the roof. The roofing shall be Coloured Galvalume roofing system (olive green colour or as approved by GE) with feed material manufactured from 0.50 mm Total coated thickness (TCT), minimum 550 MPa yield strength and shall conform to the physical specifications of IS: 2062 of 2011, coated with hot dip metallic Aluminium / Zinc alloy coating AZ150 as 150 gm/sq.mt total on both sides.

(iii) The painting shall be coloured baked enamel polyester with silicon coating of film thickness 25 microns nominal on the exposed face/exterior side and on the reverse side ( interior face) shall be white with 15 microns film thickness, over a coat of 5 micron nominal thickness Primer.

(iv) The contractor shall produce purchase vouchers for each lot for verification of Engineer-in-Charge.

S & fixed in repair of 12 mm thick ,7 ply, plywood ,grade BWR ,type BB fixed to wooden frame work in wall with nails all as specified

Stainless steel spring hinges of size of approved pattern and make suitable for base/wall unit of modular kitchen Including taking down the existing one complete (Make : BIR SS or equivalent make as per list of makes)

Stainless steel plain basket of size 530 x 505 x 100mm Including taking down the existing one complete. Make : Butterfly or equivalent make as per list of makes

Stainless steel bottle basket of size 200x 508x 431mm including taking down complete all as specified and directed. Make : Butterfly or equivalent make as per list of makes

Second class hard wood plain fillets square or rectangular in section exc 3 Sqm n.exc 6 Sqm wrought secure with screws complete all as specified and directed.

6 mm thick teak wood lipping for 18/19 mm thick particle board fixing with nails complete all as specified and directed.

Granite work (of any type) 18 to 20mm thick (table rubbed and polished including round edge) in steps, jambs, pillars, windowcills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over and including 15mm thick screed bed in cm 1:4 including dimantling existing one complete all as specified and directed by Engineer-in-Charge. NOTE : The manufacturer's test certificate and individual test certificate for tiles must be submitted for approval by the concerned authority prior to installation.

30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); all as specified and directed.

Fixed in repair 300 mm long aluminium alloy ,anodisd ,sliding door bolt with hasp,stable (bolt type) and fixing of clips sheet ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

Mild steel, bright finished or electro galvanised continuous (piano) hinges width of flaps (when open) 30mm complete including taking down existing one all as specified and directed.

150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

250 mm mild steel ordinary rat rail rod pattern spring including roller and roller plate including taking down existing one all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane complete all as specified and directed.

Repair to door by supply and fixing stiles/ top and freeze rails of size 100mm wide of second class hard wood 35mm thick including making of grooves and fixing new bottom rail by replacing defecting rail using fevicol and wooden pinning

Decorative laminates of 0.90 mm thick type matt finish, colour and pattern as approved. Including taken down existing one complete all as specified and as directed by Engneer-in-Charge

Stainless steel handles of size 150 mm of approved pattern and make suitable for Base/Wall unit of modular kitchen Including taking down the existing one complete (Make : Spykar or equivalent make as per list of makes)

Stainless steel cutlery basket of size 530 x 505 x 100 mm Including taking down the existing one complete Make : Butterfly or equivalent make as per list of makes in PS)

Stainless steel telescopic slider of 500 mm of approved pattern and make suitable for drawer in base unit of modular kitchen including taking down the existing one complet

Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat etc. including taking down existing one complete all as specified and directed. Note: Minimum thickness of powder coating 50 micron.

9mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame including taking down existing one complete all as specified and as directed.

Magnetic catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed.

40 mm dia cupboard knobs fixed with nut, screw and washer of brass polished including taking down complete all as specified and as directed.

Material and Labour for 18/19mm thick Prelaminated particle board, interior Grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work.

Stainless steel thali basket of size 600x 500x 100mm Including taking down the existing one complete Make : Butterfly or equivalent make as per list of makes in PS)

Fixing only in repairs loose wooden pelmet boxes/curtain rods in position by using rawl plugs/wooden gutties fixed with MS holder clips complete incl tightening of screws etc complete in all respect length of each pelmet n exc 2.50 mtr long

Preparation of new or previously untreated steel surfaces under 10 cm girth and applying two coats of synthetic enamel paint including one coat of red oxide primer

Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 60mm thickness M-35 grade, laid over and including M sand cushion of 50mm thick,and providing cement concrere 1:2:4 type B1 in kerbs or rounded or chamfered on edges complete all as specified and directed. Note : The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar

Providing and injecting chemical chloropyri phos 20 EC confirming to IS 894 or IMIDACLOPRID 30.50SC confirming to IA 16131 for post constructional Anti TermiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and directed.

CP Hand shower (Health Faucet) with 1M Flexible tube with 8mm dia wall hook with NRV (Back flow preventor) including taking down existing one Complete all as specified and as directed CAT Part No ALD CHR-579 Jaquar or equivalent in Parryware, Cera

Towel rail 24" long for wash basin including taking down existing one Complete all as specified and as directed Make: CAT Part No-ACN-1111NM of Jaguar series or equivalent make of hindware / parriware.

100mm long medium weight, stainless steel, butt hinges all as specified and directed

100mm long medium weight fixed as in repair and welded to metal frame n exc. 2.5 cm in length and n exc 6 mm of metal thickness.

250 mm long aluminium alloy ,anodisd ,sliding door bolt with hasp, stable (bolt type) and fixing of clips sheet ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed .

S&F coloured venetian blinds 100mm wide imported quality to windows vertically hanging self designed with all fittings such as brackets, rollers, pulleys etc complete all as specified. Make: Vista/ Clams/ MAC

Supply and Fixing 1 st class soft wood pieces ,small let in for making good where hinges etc have been removed from chowkhats or frames,joinery,etc. Including painting or oiling to match as required.

jk construction

KSR AND COMPANY

CAK Enterprises

Neptune Engineers and Builders

NAVEEN ENTERPRISES

SENTOOR BUILDERSS

M/s Shana Constructions

A.S Enterprises