Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.9 LAccepted-AOC | ₹16.9 L | L1 | Accepted-AOC Ok |
| 2 | Rejected-Technical | - | - | Rejected-Technical Quote Not match |
Tender Value
₹21.5 L
EMD Value
₹21,500
Closing Date
31 May 2023, 3:00 pmClosed
Executive Officer, Pennathur Town Panchayat
TOwn Panchayat Office, Pennathur
Providing Galvanornised Sheet Roffing Dinning Hall And Kitchen Providing Water Supply Electrical Arrangement in First Floor The Existing Community Hall In Pennathur town Panchayat
2023_DTP_319235_1
350/2022/Pen/Vel
Open Tender
Civil Works
180 days
Pennathur Town Panchayat
Class II and above
2 documents required · 2 mandatory
₹0
₹21,500
Yes
11 Aug 2023
25 May 2023
31 May 2023
25 May 2023
31 May 2023
25 May 2023
25 May 2023 - 31 May 2023
Amount
Dismanling of the exsisting damaged rcc column including all labour and material charges etc complete as per standard specification
Supplying & Erecting centering for sides & soffits including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). SS86 & 86A V,VI, VII (s6) 7,3
FOR COLUMN
PLAIN SURFACE
Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.
Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.
Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.(For 10 M3)
Supplying and fixing of trusses using necessary M.S Pipes with 'L' angles 25mmx25mmx3mm size and I each according to design approved by the departmental officers including cutting, welding cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification.
Supply, and fixing of Galvalum sheet ( pre painted )0.47mm thick including 15 cm lapping necessary 'J' bolt and nut ,bitumen washer and screws if wooden baterns including cost and conveyance of all materials and labour charges etc complete complying with standard specifications.
Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.
Plastering in Cement Mortor 1:5 Mix (one Cement, five sand) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications
Supplying and fabrication and fixing in position of anodised natural colour matt fininsh sliding window in TWO track in all floors with following sizes. All the two shutters with slinging entering and made with UPVC (ultra Polyvinyl Chloride ) section for outer frames as shown below with necessary accessories such rubber beading.clips, handle and fixing 5 mm thick clear sheet glass including all required for fabrication etc., complete. Necessary dismantling making holes in RCC columns, beams, mansory wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the dePart ofmental officers. (All materials should be got approved by the Executive Engineer before fixing in position).
Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A FT switch covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator) sd 19 page no 68
4' 18W Crystal Glass LED Tube Light Fitting
C Ceiling Fan complete 1200 mm (48") Sweep with 300mm Down Rod (without Regulator)
Cuddapah Slab Sink of size 600mm x 600mm x 200mm with 32mm dia 'B' Class G.I. waste water pipe & 32mm dia C.P. waste coupling.
Paving the floor with descrgned coloured vitrified tiles of size 600 x 600 x 8mm of best quality and approved variety complying / confirming ISI specification land over cement mortar 1:3 (one cement and three sand) 20mm thick and pomted with same coloured cement neatly etc., complet
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid