Construction of Anganwadi building at Mozhiyur Panchayat in Mayiladuthurai Block IN MAYILADUTHURAI DISTRICT.

Amount

Construction of Anganwadi building @ Mozhiyur Panchayat IN MAYILADUTHURAI BLOCK IN MAYILADUTHURAI DISTRICT.

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Filling with river sand into foundation and basement including cost and conveyance of sand to worksite including labour for filling, watering within 200m lead for good water, including tamping if necessary, and all labour and all other incidental charges etc., complete for FOUNDATION / Basement

Cement mortar 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum

Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4" and conveyance of all materials to site and all labour charges etc complete below basement

Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4" and conveyance of all materials to site and all labour charges etc complete above basement

Supplying & Erecting shuttering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).

Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. below gl

Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.for suoer structure

Providing Granolethic floor finish in CM 1:2:4 mix using 10-12mm ISS HBG Metal to 25mm thick including cost and conveyance of all materials to site and all labour charges etc., complete complying with standard specifications and as directed by the departm

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Dadooing with glazed tiles of size 150x150x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required size

Finishing the top of the roof with one course of Machine Pressed Tiles of size 23x23x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification

Plastering with CM 1:3,10mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Plastering with CM 1:5,12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Fabrication and supply Steel Door 1.10 x 2.10 m

Fabrication and supply Steel Door 1.00 x 2.10 m

Fabrication and supply Steel Door 0.75 x 1.20 m

Supply of window of size 1.20 x 1.30 m

Supply of Ventilator of size 0.60 x 0.45 m

Supply of Jolly J 0.90 x 0.45m

White washing two coats using best freshly burnt shell lime in all the floors including cost of lime, Blue, Fevicol type gum, brushes,scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers.

Colour Washing two coats with Oil Bound Distemper over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete

Plastic Emulsion Paint two coats over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete

Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete

Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T W Clamps, Plug, Shoes, bend, Screws, nails etc., complete

Wiring with 2x1.5 sq mm (22/0/3) PVC insulated Sc. Unsheathed cu. Conductor cable of 1100 V. Grade in Suitable PVC rigid pipe consealed on wall and ceiling with PVC accessories in flush with wall with 3 mm thick hylum sheet cover with T.W. switch box and 5 A F.T switch making good of the conceakled portion with suitable colour for PVC consealed light/Fan Point. SD No. 24.

Supply and fixing of CF lamp fitting including angle holder.

Supplying and fixing 1200 mm (48") AC ceiling fan with stepped regulator 300W regulator with 1m down rod on the existing clamp. SD No. 106.

Wiring with 2x1.5 sq mm (22/0/3) PVC insulated Sc. Unsheathed cu. Conductor cable of 1100 V. Grade in Suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113 mm T.W. switch box for 5 A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wire connetion of 14 SWG TC wire for PVC plug point. SD No. 34

Supply and fixing of WT Bulk head fitting with guard (Philips/Bajaj/Crompton/K,lite) suitable for incandescent lamp with 60 W bulb. SD No. 80

Supply and fixing of 16 Amps DP switch with metal clad of 500V with fuse and neutral (side handle) on suitable TW box with PWD earthing. (SD No.136)

Supply and fixing of TNEB meter Board suitable for 32 A single phase service connection with 32 A fuse (500 V) 32 A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375 mm x 300 mm x 40mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire EB meter to fuse unit. (SD No 121)

Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unshenthed Cu.Couductor of 1100 V grade in 25mm dia Gt pipe (Glass 'B') bent at both ends with necessary angle iron up right and end supports for mains (S.D. No.64)

Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unshenthed Cu.Couductor of 1100 V grade on 7/20 GI bearer wire for service connection main (From building to service pipe) (SD No.63)

Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unshenthed Cu.Couductor of 1100 V grade on 7/20 GI bearer wire for service connection main (From electric Post to service pipe) (SD No.64)

Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc.,by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using Contractor’s rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit (only Calyx drills are to be used).

Reaming from 140/150 mm dia pilot bore to 300 mm dia bore as directed by the TWAD One metre 234.06 Board Officers upto 60 m Depth ending from ground level

Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc. complete

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and One hour 1303.93 fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by ‘V’ notch method.

Supply and delivery of 150mm OD PVC plain casing pipe

Supply and delivery of 150mm PVC end cap

Supply and delivery of submersible pumpset 15*150

Supply and delivery of 2.5 Sqmm submersible cable

Supply and delivery of 32 mm UPVC- Column Pipe

Supply and delivery of 32mm GI elbow

Supply and delivery of 32mm GI coupling

Supply and delivery of 50mm GI flange set

Supply and delivery of 40mm MS Clamp set

Bore CoverBore cap using M.S. Flat of size 1 cm x 3 mm and M.S. sheet on top with bolting arrangements for securing the cap in position (Bore caps with M.S. Couplings need not be made) 6" Casing Pipes

Labour charges for the erection of submersiblepumpset inborewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the requireddepth valves erection clamps, pressuregauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter,three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. up to 5.0 HP

Provision for GST

V.Munusing