CPAac

Amount

Design, Supply Installation, testing and commissioning of 8.5 TR Air conditioner with the following components a) Supply of 8.5 TR capacity floor mounted package Air Conditioner high tech, 2 Nos. of Hermetically sealed scroll compressor each with inbuilt internal terminal protector internal pressure relief valve with fin and tube type cooling coil, Detachable type drier provided in refrigerant circuit to reduce moisture content multi stage type distributor for feeding equal quantities of the refrigerant mixture to all the section of the coil with required valves, directly coupled blower to reduce troubles and wear & tear compared to belt driven blower, Thermostatic expansion valve lift and pull type aluminium framed durable, washable air filter, integrated electrical panel with complete microprocessor control with display for easy operation and maintenance of unit common operating conditions of 45o F suction temperature Auto reset type HP/LP safety cut to improve reliability of compressor. Type Qty – Floor Mounted Package Refrigeration compressor scroll 1 No Blower Qty – 1 No Motor Power – 415V / 3 Ph / 50 HZ Indoor weight – 250kg Air Flow - 3500 CFM

b) 8.5 TR capacity ceiling for floor mounted package air conditioner high tech outdoor unit with power saving high efficiency sturdy and rugged. Auto reset type HP / LP safety cut out to improve reliability of compressors and condenser shall be made of super slit high efficient aluminium fins mechanically banded to copper tubes condenser 'L' type coil to be rigidly fixed to unit frame with fasteners imported condenser fan & fan blades to be statically and dynamically balanced to reduce noise and vibration. The fans are direct driven by 3 phase motor with protection condensing temperature 130o F for the system operation Outdoor weight – 65Kg Refrigerant - R410 (SR)(M-1998)

Supply of R410A Gas (SR)(M-2046)

Supply,Fabrication and fixing of MS Channel forMounting the Air Conditioning Indoor unit (SR)(M-2011)

Supply,Fabrication and fixing of MS Channel for Mounting the Airconditioning outdoor unit (SR) (M-2012)

Supply and providing Civil Concrete Block for Mounting the Air Conditioning Unit (SR)(M-2017)

Supply and laying of 1 1/8’’ hard drawn Copper pipe interconnecting indoor unit and condensing unit with necessary fittings, supports etc (MR)

Supply and laying of 7/8’’ hard drawn Copper pipe interconnecting indoor unit and condensing unit with necessary fittings, supports etc. (SR)

Supply,Fabrication and erection of factory Fabricated Spiral/Flat Oval type Duct made up of 22G inclusive of all supports spilters vanes,vanes with powder coated of flat oval duct 8mm support rod with slotted (SR)(M-2007)

Supply,Fabrication and erection of factory Fabricated Spiral/Flat Oval type Duct made up of 24G inclusive of all supports spilters vanes,vanes with powder coated of flat oval duct 8mm support rod with slotted (SR)(M-2006)

Supply and providing acoustic for initial portion of ducting with 12mm thick Fibre Glass Rigid Board covered with Tissue Paper and Aluminum Perforated Sheet (SR)(M-2005)

Supply and providing of 13mm thick Nitrile rubber thermal insulation to entire inside area of the Factory made Spiral duct with proper denrite adhesive past to reduce noise and avoid the vibration and etc (MR)

Supply and fixing of extruded aluminum powder coated supply and return air grilles/diffusers with volume control damper (SR)(M-2009)

Supply and Fixing of Duct Mouth Dampers (SR)(M-2014)

Supply and fixing of 1inch UPVC water drain pipe line with L-bow, U-bends,pasting and clamping with proper support & nitrile hose insulation (MR)

Renewal by Supply and providing of Red and yellow redoxide paint for Suction and discharge copper line (MR)

Renewal by Supply and fixing of 50mm thick anti vibrating rubber pads (SR)(M-2005)

Supply and Laying of 3 Core 2.5 Sq mm Copper wire (SR)(M-3077)

Supply and fixing of Flexible Canvas Connection (SR)(M-2004)

Core Cutting the wall for Drain and copper pipe indoor to oudoor (MR)

Nitrogen Pressure Testing,Vaccummising and Commissioning the Indoor and Outdoor Unit (MR)

Lifting, Shifting ,Positioning the Package Indoor Unit with suitable Load man with safety and Equipment For Lifting (MR)

BHARAT CORP (BID ID -1513505)