SPECIAL REPAIR TO BLDG NO T-381,T-383 AND T-389 OFFICERS HUT AND DRAINAGE SYSTEM AT A DET AND PROVISION OF CERTAIN MINOR WORKS UNDER AGE B/R -III AT BB CANT, SRINAGAR

Taking down chowkhats/frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm each, complete all as specified and directed.

Taking down chowkhats/frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 3 Sqm each, complete all as specified and directed.

S & F aluminium powder coated sliding window made of the following specifications, complete all as specified and directed :- (Net external size of window shall be measured. Following items are included in this unit rate.), (a) Aluminium frame powder coated all around of hollow section 100 mm x 44 mm x 1.60 mm thick. (b) Provn of 03 trade runners of size 92 x 31.75 x 1.10 mm. (c) Provn of glazed sliding shutters (02 Nos) of section 44 mm x 18 mm x 1.25 mm provided with 3.50 mm thick tinted glass with suitable EPDM beading and locking clips arrangement. (d) Provn of 01 No gauzed shutter of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable EPDM beading and locking clips arrangement. Section of shutter as per para 1 (c) above. (e) Aluminium powder coated grill of weight not less than 2.60 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame. (f) Repair to the jamb, cills and all sides around the window is incl in unit rate. The repair finishes to match the existing surfaces like tiles, plastering, wooden planks etc.

M&L for aluminium anodised powder coated sections of approved and required size for door / windows frames or chowkats / partitions / shutters, sliding channels / tracks etc including jointing cleats, MS nut & bolts or steel screws, dash fasteners, rowel plug for fixing of screws in wall or floor etc complete all as specified and as directed.

S&F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, EPDM beading, handles 2 Nos, 01 X lock with duplicate key & 03 x hinges 100 mm in each door, anodised aluminum snap beading, screws etc and 12 mm thick particle board in lower panel ad 5 mm thick glass in upper panel and any other accessory reqd complete all as specified and as directed.

S & F aluminium powder coated partitions made of the following specifications, complete all as specified and as directed. :- (Net external size of partition shall be measured. Following items are included in this unit rate.), (a) Aluminium frame powder coated (Vertical and horizontal members) @ not exceeding 1.20 m distance both ways of hollow section 100 mm x 44 mm x 1.60 mm thick. (b) Lower portion of partition shall be fixed with 12 mm thick particle board fixed with suitable aluminium beading clips and EPDM beading (rubber) and all other accessories. (c) Upper portion of partition shall be fixed with 5 mm thick glass (as per user requirement) fixed with suitable aluminium beading clips and EPDM beading (rubber) and all other accessories. (d) Dismantling of old unservicable partitions of any description and any thickness (AC sheets, wooden particle boards with wooden frame etc. (e) Repair to the jamb, cills and all sides around the partition is incl in unit rate. The repair finishes to match the existing surfaces like tiles, plastering, OBD etc.

S & F aluminium powder coated openable double window (Gauzed and Glazed) made of the following specifications, complete all as specified and as directed. :- (Net external size will be measured. Following items are included in this unit rate.), (a) Aluminium frame powder coated all around of hollow section 63 mm x 38 mm x 1.50 mm thick. (b) Provn of glazed openable shutter of section 44 mm x 18 mm x 1.25 mm provided with 3.50 mm thick tinted glass with suitable EPDM beading,02 Nos 100mm powder coated aluminium hinges, 02 Nos 100 mm long powder coated aluminium tower bolts, 01 Nos100 mm powder coated aluminium handle and 01 No hook & eye & any other fitting reqd for each shutter. (c) -ditto- as in para 7 (b) above but using stainless steel wiremesh 0.36 mm dia and 1.40 mm aperature in lieu of 3.50 mm thick tinted glass. (d) Aluminium powder coated grill of weight not less than 2.60 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame. (e) Repair to the jamb, cills and all sides around the window is incl in unit rate. The repair finishes to match the existing surfaces like tiles, plastering etc.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and as directed

S&F 12 mm thick Toughned glass (Opaque with etching) as in hinged doors, partitions automatic doors, logo plates and similar work including cutting to shape, drilling holes and provided with suitable modular hinges and fixing arrangements all as required on site incl dismantling old unserviceable glass frames complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300x 450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10mm thick backing coat in cement mortor 1:4 (if reqd in any portion) and including dismantling floor, hearth or wall tiling (but not backing), removing rubbish off the premises, complete all as specified and as directed.